bing tracking image
Q & A Icon

Troubleshooting A-Frame Jack That Has Limited Travel With Electric But Works Manually  

Updated 09/29/2015 | Published 09/28/2015

Question:

My tongue Jack seems to be jambed. It starts to move in both directions very slightly but then stops abruptly. I can manually raise and lower it. Any ideas on repairs?

0

Expert Reply:

You said you are able to raise or lower the # JET-3555 with the hand crank so that rules out the gears or the motor being seized. My contact at Stromberg-Carlson told me they think there may be an intermittent problem with the wiring like a ground.

Check the ground connection and make sure it is attached securely to a clean bare metal surface and also check for any damaged wire. You can also pull the cover off the jack and inspect the wiring and any other parts to see if you can find anything that is damaged.

You did not say if this is a newer jack or if you have had it for a while so you may want to make sure you are not exceeding the capacity for the jack.

If you find you want to replace the jack you can check out the attached link to our website for the A-frame electric jacks we offer.

expert reply by:
0
Jeffrey L

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>