CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
(56 reviews)
Price: $81.07
In Stock
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
Item # CE31013G
Retail:$88.50
Our Price: $81.07
You Save: 8%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (56)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE31013G
- Winch Stand
- 30 Inch Tall
- 2 Inch Wide
- CE Smith
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.
Features:
- Heavy-duty winch stand supports a winch on your trailer's 2" tongue
- 14 Mounting holes allow you to adjust height of winch during installation
- Sturdy, hot-dipped galvanized, 12-gauge steel construction
- Made in the USA
Specs:
- Application: 2" trailer tongues
- Dimensions: 30" tall x 2" wide
This winch stand mounts on your trailer by clamping around the 2" wide tongue. The holes on the base provide multiple mounting options and angles, and the surface where you mount the winch is slightly angled to help with winch operation.
Hot Dipped Galvanized Steel
Hot dipped galvanized steel parts are stamped from a sheet of steel. The edges of the galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating (less than 1 mil) and the fact that the edges remain exposed, galvanized parts can begin to oxidize and rust quickly, so it's recommended that they be primed and painted.
CE31013G 12-Gauge, Galvanized Steel Winch Stand by CE Smith - 30" Tall x 2" Wide
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide - CE31013G
Average Customer Rating: 4.9 out of 5 stars (56 Customer Reviews)
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.by: Barry10/28/2021
PERFECT. This was exactly what I was looking for and didn't know if it existed. My Kayak Trailer is a bit smaller than regular boat trailers,this extension for my winch means I can Fish for a bit longer without throwing my back out moving my BONAFIDE SS127 around. Thanks for being Forward thinking and helping us in making Kayak Fishing The New Thing. Thanks guys, I will send some pictures of the modification.
by: Michael06/02/2019
I haul my whitewater raft (it is a cataraft) on my utility trailer and I needed a winch mount that was strong and gave me some elevation above the trailer tongue. This was the perfect solution. It only took me a few minutes to mount with four 3 inch by 3/8" bolts (not included). This winch mount was inexpensive, simple, feels really solid and seems to be working perfectly. eTrailer is always great to do business with.
by: Andrew 10/08/2023
Fairly priced Timely Delivery
by: Mark 06/27/2023
Works great.
Easy to install.
Just what I needed!
by: Patrick 06/08/2021
This is very sturdy. I put a winch on it to pull a small aluminum boat onto a trailer and have no problems. It does exactly what it is supposed to do. I would buy again but doubt I will have to.
by: Jeff 09/25/2022
Needed this for a small trailer. Perfect ! Existing holes almost did the whole job. I only had to drill two new holes.
by: Kenneth05/27/2016
This winch stand was perfect for my needs. I had tried fabricating one before I found etrailer.com. Sure makes the job easier when you have the right parts.
Kenneth
1/26/2018
All working well, thanks.
by: James10/27/2017
Customer had an accident and damaged trailer. Winch stand, bow roller mount and rubber bow wedge were all as described fit great and my order was filled and shipped quickly. Very pleased with products and service.
by: Roger B. 10/30/2015
This is the third or fourth order I have placed with e-trailer, and each time they have packaged the items correctly and they have been recieved in the suggested amount of time, with no damage or loss; exactly what I ordered. i would highly recommend this company. Roger B.
by: Martin D.01/23/2014
Seems to be a durable products ( CE31013G) and (CE31005PG) but no installation tips instructions included. No hardware. Should provide hardware size/type information.
by: Dave L01/19/2016
This product arrived on time and is just what I need to repair my broken snowmobile trailer. Great communication from George about the timing of shipping.
by: Steve T10/26/2019
Part worked as it should. Was a bit tall for my application, but not a serious problem.
by: Stephanie04/25/2022
Stand is solid and exactly what my husband needed to complete his trailer. Delivery was much faster then I expected as well!
by: lee09/03/2013
Product was on backorder. Waited more than three weeks. It was worth it. It was durable, well made except it missed one hole on one side and I have to drill a hole so the bolt can go through from one side to the other.
by: neil07/04/2015
Works great for mounting on a raft trailer. Well built will need to finish so it doesn't rust, but otherwise does what it is supposed to.
by: Jay08/20/2018
As always, and easy, pleasurable shopping experience with etrailer! Not only do they ship out quickly and send you exactly what you ordered, but their customer service and follow up is unmatched!
by: Donald J05/02/2020
Solved a space problem with winch post that came on trailer.
by: Kathryn 09/15/2021
Very good quality. Fits my trailer perfectly. Everything the website said that it was. Delivered three days BEFORE the delivery date!!
by: Justin09/02/2015
Much heavier and more stout than expected. Should be able to withstand the hardest hits when driving the boat on the trailer.
by: Heath03/05/2018
Everything looks good so far just opened the boxes.
by: James04/16/2018
This company has the best pricing online and everything u need for a trailer. Will do business in the future. Thanks etrailers.
by: Aaron 05/05/2021
Works great... would be nice to get with hardware to attach it but a great product
by: Zan08/15/2018
Everything was spotted as promised. The product fit the trailer I am building. Very happy with the product and the purchasing process
by: Conley12/13/2019
The winch stand worked perfect for my trailer that I was setting up for my hobie pa.
by: Michale D.07/04/2016
Product came quick. Need better packaging some parts were bent.
25
56
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Fit of CE Smith Winch Stand # CE31013G on 2 Inch Wide Trailer TongueThe CE Smith Winch Stand you mentioned, part # CE31013PG is designed for 2 inch wide trailer frame members. The stand would fit and work well on your 2 inch wide by 4 inch deep trailer tongue.
view full answer... - Availability of Vertical Winch Mounting PostThe closest option we have to what you are looking for is the CE Smith Winch Stand part # CE31013G which gives you a slightly angled back winch stand that can attach to your boat trailer tongue. This is overall 30 inches tall and 2 inches wide.
view full answer... - How Does the CE Smith Winch Stand # CE31013G Mount to TrailerTo mount the CE Smith Winch Stand # CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle that the trailer calls for. I attached a picture of a similar product that uses basically the same style of attachment to help you visualize how the stand would mount. You would need to provide nuts and bolts that would be long enough to pass...
view full answer...
- Size of Mounting Holes on Base of CE Smith Galvanized Winch Stand CE31013GThe mounting holes on the bottom of the CE Smith Galvanized Winch Stand # CE31013G measure 7/16-inch. Please refer to the linked photo. This 30-inch tall winch stand is made of 12-gauge steel and is intended for 2-inch trailer tongues. It is USA-made.
view full answer...
- Will CE Smith Winch Stand Fit a 2 Inch Wide and 3-1/2 Inch Tall Trailer FrameThe height of the frame does not matter, just the width. So with a 2 inch wide frame you can install CE Smith Winch Stand # CE31013G.
view full answer... - Weight Capacity of the CE Smith Winch Stand Part # CE31013GIn order to attach the CE Smith Winch Stand part # CE31013G to your boat trailer you would need to cut off the bottom portion of the stand and weld that directly to your trailer's tongue as it is only designed to bolt onto a 2" wide trailer tongue. I spoke to my contact at CE Smith and they stated that this winch stand has a weight capacity of 1,000 lbs however, this does not mean that the weight of the boat cannot exceed 1,000 lbs as the boat will be considered a rolling load and the...
view full answer... - Replacement Metal Supports for Winch on Boat Trailer It sounds like you are needing a new winch stand that will support the winch on your boat trailer. I recommend looking at the CE Smith Winch Stand # CE31013G. This is a heavy-duty stand constructed of hot-dipped galvanized, 12-gauge steel that will do a great job of resisting rust and corrosion. It features 14 mounting holes to allow you to adjust the height of your winch and is designed to install on 2 inch trailer tongues. The unit measures 30 inches tall and 2 inches wide. I have attached...
view full answer... - Does the CE Smith Winch Stand have a Capacity The CE Smith winch stand, # CE31013G, does not have a listed capacity. The stand is made of 12 gauge steel so 500 pounds of weight would not be a problem for it.
view full answer... - Availability of Winch Mount for Boat TrailerSounds like you are looking for a winch mount like # CE31013G. The stand is made of 12 gauge steel and measures 30-inches tall. It has 14 mounting holes and fits a 2 inch wide trailer frame.
view full answer... - What Kind of Paint Should be Used for Galvanized Steel of Boat Winch Mount # CE31013GMost acrylic coatings will adhere directly to cleaned galvanized metal. A weathered galvanized surface develops a layer of white rust, which must be removed to ensure good adhesion of the coating. Wire brushing or scrubbing with a stiff brush or abrasive pad is recommended to remove the white rust. As long as your trailer tongue is 2 inches wide the mount part # CE31013G is going to fit and work well.
view full answer... - Are Additional Parts Needed for CE Smith Winch StandThe CE Smith Winch Stand # CE31013G is basically the complete thing in and of itself. You just need to pick up appropriate hardware to install it to your trailer tongue and then install the actual winch on it and you'll be good to go. The mounting holes have a 7/16" diameter and you can either use U-Bolts to wrap around the trailer tongue or bolts to mount it directly into the trailer tongue - it just depends on what exactly you need for your trailer.
view full answer... - Winch Stand to Install Winch onto Boat TrailerIt sounds like you're looking for the CE Smith Winch Stand # CE31013G. This is a stand that your winch will mount to anywhere on your trailer's tongue. It gives you multiple mounting angles and options with 14 mounting holes. It fits 2 inch trailer tongues and is 30 inches tall. If you also need a winch or bow stop I've linked our selections for you to take a look at.
view full answer... - Picture of CE Smith Winch Stand # CE31013G Installed on TrailerI attached a picture that we recieved from a customer that shows the CE Smith winch mount # CE31013G installed and in use on a trailer for you to check out.
view full answer...
- Boat Trailer Winch Stand AvailablilityThe CE Smith Winch Stand # CE31013G is the only boat winch stand we carry at this time. I do not see that any of our vendors offer the winch stand with steps that you are looking for.
view full answer... - Adding a Winch Stand and Bow Stop to a Calkins Boat TrailerOne of the keys for a winch mount is the width trailer tongue they fit. Mount # CE31013G fits on 2 inch wide trailer tongues so if that is what you have then this is a great option for the trailer and winch.
view full answer... - Replacement Boat Trailer Winch for Winch Mounted In Channel On FrameI do have plenty of options for you to choose from but finding one that matches what you have exactly is going to be next to impossible unless you were able to find the same model. Therefore, you are most likely gong to need to do a bit of modifications if you want to replace this winch. It looks like the winch mount setup you have now was a one-off for your particular winch model. The Fulton F2 Fully Enclosed Trailer Winch part # FW16000101 has a 6-3/16" long x 3-3/8" wide base but the...
view full answer...
- Winch Stand Compatible with Sled Bed Snowmobile TrailerThe CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G should work on the center beam based on the measurements you gave. The additional height of the center beam won't be an issue as the width is still 2 inches. Because your trailer is 3-3/4 inches tall, this will required mounting directly to the frame instead of using u-bolts around the frame. You will also want to consider using the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059...
view full answer...
- Winch Stand Recommendation for a Fulton F2 WinchThe winch stand you see in the attached review video for the Fulton F2 Fully Enclosed Trailer Winch # FW16000101 was already on there when we installed the winch in the video, so it isn't anything that we sell. If you're in the market for a winch stand then I recommend checking out the CE Smith Winch Stand # CE31013G to pair with the F2 winch you're looking at.
view full answer... - Hitch Recommendation for a 2015 Audi Q7 QuattroYes, the Curt Hitch part # 13220 that you referenced has been confirmed to fit your 2015 Audi Q7 Quattro. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
view full answer... - How To Extend the Fulton XLT Powered 9K Winch A Few InchesI do have a solution for you but the strap cannot be flipped so to speak so that it comes out on the top rather than the bottom in regards to the Fulton XLT Powered Winch with Rugged Strap part # DL25215. I am also not aware of a boat trailer winch the capacity you need with this feature therefore your best option would be to adjust your winch mount to better suite your needs. We do offer the CE Smith Winch Stand part # CE31013G which is 30" tall if needed.
view full answer... - Recommended Winch Stand And Mount For 1998 Nitro Boat TrailerFor your 1998 Nitro Trailer, I recommend the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. You can then use the Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson # DL24110 if you want a different mounting for the winch.
view full answer... - Recommended Winch Post/Stand For Boat Trailer With Roller StopIt sounds like you are looking for the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. This is designed for a 2 inch by 3 inch frame, so you will need to make some modifications. This is the only winch stand we currently carry. You may also be interested in the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059 and the CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Yellow TPR # CE32015G.
view full answer... - Recommended Winch Stand For Flat Trailer With Single Beam TongueThe winch post we offer is part # CE31013G, and the typical installation for this is on a boat trailer. This post measures 30-inches tall and is designed for 2-inch wide trailer frames. It is made of 12-gauge steel and it has 14 mounting holes. I have attached a photo of the winch stand you can check out. There are mounting holes at the bottom of the stand that can be used to attach to your trailer tongue. You can use bolts and just remove the entire stand when you want to carry different...
view full answer...
- Will the MaxxTow MaxxHaul Hand Winch Work With the CE Smith Winch StandThe MaxxTow MaxxHaul Hand Winch part # MT50156 will work just fine with the CE Smith Winch Stand part # CE31013G. There will be no additional winch mounting plate needed, you'd just bolt the winch base directly to the stand. There are pre-drilled holes on the winch stand which should line up with the holes on the winch but if not you would need to drill a hole or two.
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Written by:
DeAnne T
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Patrick
6/9/2022
Part looks and works like the day I installed it. Exactly what I needed.