See what our Experts say about this Dexter Trailer Suspension Parts

• Lift Kits Available for Torflex Axles
  The lift kits we carry fit with specific axles; the # K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit would work for you. There are a number of other lift kits for Torflex axles which I'll list for you. Tandem Axle - 2-7/8" Lift compatible with side-mounted #11 Torflex axles with 4,100-6,000-lb capacities # K71-724-02 Tandem Axle - 2-5/8" Lift...
  view full answer...
  
• Lift Kit for a 2024 Airstream Globetrotter 30' Trailer
  Hey Seth, thanks for reaching out! I believe you have the Torflex #11 axles which means you would need the Torflex Lift Kit # K71-724-02 for a 2-7/8" lift. I recommend checking the tag on your axle to make sure this is accurate. If you find something different please let me know!
  view full answer...
  
• How to find the Correct Lift Kit for a Dexter Torflex Axle
  We offer four different axle lift kits for the Dexter Torflex axles. The difference between these kits is based on the weight capacity of the axle or tandem axles. There will be a tag on the axle shaft that will have the information needed to determine which lift kit is needed. The tag will have axle model listed and should list weight capacity and a serial number as well. For a Dexter 11 axle the recommended lift kit will be # K71-724-02 for tandem axles rated 4.1K to 6K lbs. This kit...
  view full answer...
• What Torflex Lift Kit For Dexter #11 Torflex Axle
  Hi Nick, unfortunately we don't have anything with bolt holes that are 9-3/4" apart on center, just 9-1/2" apart, so you may want to measure to get as exact as possible. Also, does your axle have a number on it, either 10 or 11, just below where it has the dimensions (it would say HF=xxxx, etc)?
  view full answer...
• Will RoadActive Suspension Kit Reduce Sag in 2017 GMC Sierra 2500?
  Though there is not a specific number I can offer, what I can tell you is that the Roadmaster Active Suspension Kit # RAS3611-HD is designed to level your 2017 GMC Sierra 2500 under a maximum 3,000 lb load. So what will happen is you will no longer experience the 1" of sag you said you were encountering, though your trailer will ride an inch higher in front. This is going to be true regardless of the suspension enhancement though there may be a solution. If you haven't already, unbolt...
  view full answer...
• Which Lift Kit Fits 2018 Airstream Flying Cloud 27FB
  Hey Steven, from what I was able to determine from some research, the 2018 Airstream Flying Cloud 27FB does have a #11 Torflex axle on it, so the Dexter # K71-724-02 is the correct lift kit for your trailer. This is a 2-7/8 inch lift kit. Why are you wanting to lift your camper?
  view full answer...
• What To Check Out on 2020 Forest River Rockwood Ultra to See if Dexter Lift Kit Could Fit
  If you had 3 inch brackets it would look like you have a lift kit basically already installed on your trailer. I attached a picture of the # K71-724-02 installed that you can compare to what you have now to see if your setup looks like it would fit well.
  view full answer...
  
• What Is the Correct Lift Kit for an Airstream Trailer with Torsion Axles
  I don't know what axles you have on your trailer but if you look at the axle tag it will tell you this. If you can't comprehend the axle sticker then just send me a photo of this and I will be happy to do that for you. There are a few different lift kits for torsion axle trailers but they vary by manufacturer and capacity. I have attached the options below: Tandem Dexter #11 Torflex Axle (4,100 - 6,000 Lbs) # K71-724-02 Tandem Dexter #10 Torflex Axle (2,300 - 4,000 Lbs) # K71-707-02 Single...
  view full answer...
• Lift Kit Recommendation for Trailer with Tandem Dexter Torflex 5,200 lb Axles
  Since you have a 5,200 lb Dexter Torflex tandem axle setup the correct lift kit is the part # K71-724-02. This will give you a 2-7/8 inch lift and would work well.
  view full answer...
  
• Torsion Lift Kit for Airstream with Number 11 Torsion Dexter Axle
  Is this a single axle trailer? Leaf spring or torsion style suspension? Send me the pictures you mentioned.
  view full answer...
• Recommended Lift kit for an Airsteam Globetrotter 27FB
  Hey Jeff, it looks like your Airsteam Globetrotter 27FB has tandem 6k axles so a lift kit like the Torflex Lift Kit # K71-724-02 that you were looking at should work great. The only caveat is that this kit is designed specifically for #11 Torflex axles so you'd need to verify that first. You could also use the Correct Track Trailer Alignment and Lift Kit # RR23QX which will work with 3" wide x 3-3/4" tall hangers, or 3" wide x 5" tall hangers and leaf springs up to 2" wide. If want 2"...
  view full answer...
• Lift Kit that Fits 2017 Lance 2295 Camper with Tandem Dexter Axles
  Could you get me more info on the axle you have? Is it a torsion axle setup? Do you know the capacity?
  view full answer...
• Can The Timbren Silent Ride Suspension TSR3500S05 Be Used With Torsion Axles?
  Hello again, James. We will need to consider a different approach here because the Timbren Silent Ride Suspension like part # TSR3500S05 cannot be used with torsion axles. In order to use the Silent Ride you would need to completely replace both axles, which kind of defeats the purpose of the Silent Ride system in the first place. If you want to look into it, I will need to know the length of your axle measured across from hub-face to hub-face. The 2" square axle is highly common. It...
  view full answer...
• Lift Kit Needed for #11 Torflex Axles with Top Mounting Holes
  Thank you for the pictures! I reached out to my contact at Dexter Axle who was able to confirm that you have #11 Torflex axles so the correct lift kit is part # K71-724-02. Since yours has top mounting holes you also need the bracket kit # DX57FR for this lift kit to fit properly.
  view full answer...
  
• Lift Kit that Fits Airstream Flying Cloud 30FBQ
  Hey Sam, so from previous customers we have found that your Airstream Flying Cloud 30FBQ has the Dexter Torflex # 11 axles so for a lift kit you'd want the part # K71-724-02 which will give you a lift of 2-7/8 inches.
  view full answer...
• Lift Kit for 3,000 lb Torflex Axle
  I was unable to find a reference to your axle; is it a torflex axle or standard axle?
  view full answer...
• Lift Kit for a 2016 Airstream Flying Cloud 23FB
  The most common way to lift a trailer, like your 2016 Airstream Flying Cloud 23FB, is to add an over-under kit like part # K71-384-00 for a 2-3/8" axle diameter or part # K71-385-00 for a 3" axle diameter. These will raise your trailer equal to the diameter of your axle plus the height of your leaf spring stack. I'm not quite sure what axles you have on your Airstream so if you have something other than standard axles then let me know and I can help you find a different lift kit like part...
  view full answer...
• Recommended Lift Kits for a 2022 Rockwood 8337RL Travel Trailer
  David, so we do have a couple of potential lift kit options for your Rockwood travel trailer, but you're going to want to make sure that what you have will work with the kit. If you have #11 Torflex axles with a 4,100 - 6,000-lb capacity, then the Torflex Lift Kit # K71-724-02 would work great and would lift your trailer 2 7/8". If you have #12 Torflex axles with a 5,500 - 7,000 lb capacity, then the Torflex Lift Kit # K71-725-02 would work great and would lift your trailer 3 1/8". Lastly,...
  view full answer...
• Availability of Lift Kit for Exiss Living Quarter Horse Trailer
  Hi Scott; we might have an option but it depends on your axles. If you have standard leaf spring axles with the springs running under the axles you could flip them to raise the trailer. If you have a 2-3/8" diameter axle you can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 and for a 3" diameter the # K71-385-00. If you have torsion axles you will need to identify them before finding the right kit. The best way to do this is to check your axle tag. If it is a Dexter...
  view full answer...
• What Lift Kit do I Need for My 1997 Adams Horse Trailer with 3,500 Pound Axle?
  Hello Shelby, Thank you for the picture of the axle tag and all the information, it was very helpful! Based on what you provided, the correct lift kit for your trailer is the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-707-01. This kit is designed for Dexter Torflex axles with capacities ranging from 2,300 to 4,000 lbs, and it features the 8" bolt pattern that matches your axle. What kind of horses do you have?
  view full answer...
• Recommended Lift Kit For Torflex #9 Axle And Recomended Lift For Torflex #10 Single Axle Trailer
  For your single torsion axle, I reached out to my contact at Dexter Axle and was able to find a lift kit for you. I recommend the Torflex lift kit for single axle # K71-723-01. This will allow you to lift the axle on your 2003 Star-craft Star Shuttle by 2.63 inches.
  view full answer...
• Recommended Lift Kit for a 1984 Airstream
  I would be happy to! There are a couple of options to lift your trailer depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and Lift Kit item # RR23QX. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4". If your springs are below your axles you will want to use one of our axle flip kits. These work by moving your axle below your...
  view full answer...
• Replacement Brakes and Hub/Drums For a 2007 Airstream Safari Trailer With 5,000LB Dexter Axles
  Thank you for the images. This shows me you currently have the Dexter Electric Trailer Brake Kit # 23-105-106 on your 2007 Airstream Safari. I recommend upgrading to the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 as this will give you a more consistent brake feel as the shoes wear. It also eliminates the need to adjust the brakes every 3,000 miles. If your hubs are worn beyond their serviceable limit then you will need to replace them. We have 2 possible hub/drum assemblies...
  view full answer...
  
• Lift Kit for Gooseneck Travel Trailer
  The # K71-724-02 you were looking at will only fit your travel trailer if you have a side-mounted Dexter # 11 Torflex axles. If you have # 10 axles you can use the # K71-707-02 instead. If you don't have Torflex axles and have a standard axle you could use an axle flip kit which will raise the trailer by the height of the axle plus the leaf spring stack. For a 2-3/8" diameter axle you need # K71-384-00 and for a 3" axle # K71-385-00. If you have something else entirely please let me know...
  view full answer...

Do you have a question about this Trailer Suspension Part?