How To Convert a Boat Trailer from Center Rollers to Bunk Rollers

Updated 04/24/2019 | Published 04/23/2019

Products Featured in This Question

CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair

(216)

$251.91

CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4

(610)

$58.51

CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair

(754)

$218.04

CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide

(77)

$84.42

CE Smith Keel Roller Assembly for 3" Wide Trailer Tongues - Galvanized Steel and Black Rubber

(421)

$39.94

Fulton Single Speed Trailer Winch - 7" Long Handle, 12' Strap - Zinc - 900 lbs

(371)

$65.11

Question:

Is it possible to change my boat trailer from a center roller type to a bunk style trailer I have a 13’ boston whaler.

asked by: Bill

Expert Reply:

Yes, it is possible to switch from center rollers to bunk rollers on a boat trailer. For this, you will first need to remove the center rollers and then you can install a set of bunk rollers, part # CE27710 along with part # CE10000G-4 to support the hull. Then, in order to support both the port and starboard sides you can use part # CE27600.

I have attached a photo of a similar setup with bunk boards instead of bunk rollers for the hull. In addition to the above you will also need to have a bow support like the CE Smith Keel Roller Assembly part # CE32003G which you could then attach to the CE Smith Winch Stand part # CE31013G. For a new winch, you can use the Fulton Single Speed Trailer Winch part # F142007.