Option For Karavan Trailer Winch Stand

Question

Question:

Karavan Trailer 5ktbs:1918NF558343 Need winch stand

asked by: Michael M

0

Expert Reply:

Hi Michael,

While we don't have any way of knowing what winch stand goes on any specific trailer, it is possible we have an option for a winch stand for your Karavan trailer. The only option we have for a stand is the CE Smith Winch Stand # CE31013G.

This is a 30" tall stand and will clamp around a 2" wide trailer tongue.

expert reply by: Kyle S

0

Michael J.

4/25/2024

Thanks. With that CE SMITH i need to add not only a winch mounting plate (?) but also a roller assembly I have a photo but not smart enough to attach.

Kyle S.

4/25/2024

@MichaelJ It's not you, it's definitely us regarding the photo. Thanks for emailing it to me. But for this stand, the winch mounts directly on it, and there isn't a roller assembly that fits it; this is really just a basic stand, but it's all we can offer as an option.

Answer 1

I do have a solution for you but we don't offer any integrated winch and bow roller setups like the Knot Autoflex. Therefore, you'd have to purchase a winch stand assembly like the CE Smith Winch Stand part #CE31013G which bolts onto the…

view full answer...

Answer 2

I attached a picture that we recieved from a customer that shows the CE Smith winch mount #CE31013G installed and in use on a trailer for you to check out.

view full answer...

Answer 3

If you look at the provided photo, you can see the hole spacing on the mounting pad of the Buyers Products #337HW800S 800 lb capacity trailer winch. 1/2 inch hardware is recommended.

view full answer...

Answer 4

Hey Michael. We have quite a few options for standard rubber bow stops but which one you need is going to come down to how wide your current uprights are. One of the Yates Y-Style Bow Stop for Boat Trailers like the 6-1/2" span item #YR6Y33-4 is…

view full answer...

Answer 5

Since the Malone EcoLight trailer part #MAL53FR has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…

view full answer...

Answer 6

The mounting holes on the bottom of the CE Smith Galvanized Winch Stand #CE31013G measure 7/16-inch. Please refer to the linked photo. This 30-inch tall winch stand is made of 12-gauge steel and is intended for 2-inch trailer tongues. It is…

view full answer...

Answer 7

The CE Smith Winch Stand #CE31013G is basically the complete thing in and of itself. You just need to pick up appropriate hardware to install it to your trailer tongue and then install the actual winch on it and you'll be good to go. The mounting…

view full answer...

Answer 8

Yes, you can add a winch to the Malone LowBed MicroSport Trailer item #MPG464-LB. You will want to use the CE Smith Winch Stand item #CE31013G. This will fit on the Malone trailer's 2" tongue. This stand is 30" tall and made of…

view full answer...

Answer 9

The strap that you will need to use for the Dutton-Lainson Hand Winch #DL14125 is the 2" x 15' Strap #DL6148. The hook on this strap has a safety latch on it to help keep it secured to the load during operation. You will need a 2-3/4"…

view full answer...

Answer 10

Since the Malone Microsport trailer part #MPG460G has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…

view full answer...

Answer 11

To mount the CE Smith Winch Stand #CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle…

view full answer...

Answer 12

In order to attach the CE Smith Winch Stand part #CE31013G to your boat trailer you would need to cut off the bottom portion of the stand and weld that directly to your trailer's tongue as it is only designed to bolt onto a 2" wide trailer…

view full answer...

Option For Karavan Trailer Winch Stand

Product Page this Question was Asked From

Continue Researching