Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8"

Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8"

Item # CE10726A

lowest price pledge

Retail:$22.75

Our Price: $8.76

You Save: 61%
Boat Trailer Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.23 lbs

Quantity: 
In Stock, Ships Today
Boat Trailer Parts CE10726A - Zinc-Plated Steel - CE Smith
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • Roller and Bunk Parts
  • Brackets
  • 11 Inch Long
  • Roller Shaft
  • Zinc-Plated Steel
  • CE Smith
  • 5/8 Inch Diameter
11" Long x 5/8" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting. Call 800-298-8924 to order CE Smith boat trailer parts part number CE10726A or order online at etrailer.com. Free expert support on all CE Smith products. Guaranteed Lowest Price and Fastest Shipping for Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8". Boat Trailer Parts reviews from real customers.


  • All Info
  • Reviews (256)
  • Q & A (5)
  • Photos
  • Why etrailer?

CE Smith Boat Trailer Parts - CE10726A

11" Long x 5/8" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.


Features:

  • Roller shaft accommodates a roller on your boat trailer
  • Constructed of sturdy, zinc-plated steel
  • Attaches with 2 end cap nuts (included)
  • Made in the USA


Specs:

  • Application: 10" rollers
  • Quantity: 1 shaft and 2 pal nuts
  • Shaft length: 11"
  • Diameter: 5/8"


10726A Zinc-Plated Steel Replacement Roller Shaft with End Cap Nuts by CE Smith - 11" Long x 5/8" Diameter








Customer Reviews

Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8" - CE10726A

Average Customer Rating:  4.8 out of 5 stars   (256 Customer Reviews)

11" Long x 5/8" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.

- CE10726A
by:

Part was as represented fit correctly and works well. good quality. 356060



- CE10726A
by:

Great customer service, fast shipping great products.w would definitely recommend etrailer products to anyone Thanks 615615



- CE10726A
by:

Everything worked perfect 615251



- CE10726A
by:

Rollers a great, no issues. 614654



- CE10726A
by:

Love your selection and prices.Here is my drag boat and my helper.Customer service is excellent!!! 546499



- CE10726A
by:

Thank you product worked great 521552



- CE10726A
by:

This item was an exact replacement for the one on my bass boat trailer. Installation was easy and took only a few minutes. 497015



- CE10726A
by:

Thanks guys! 478415



- CE10726A
by:

nice product fast shipping thanks 452709



- CE10726A
by:

Arrived promptly , same as factory. 380037



- CE10726A
by:

I am very pleased with the rollers and hubs that I purchased. They were easy to install on the trailer and have worked well for the past year. 375193



- CE10726A
by:

The roller worked perfectly for the trailer I was redoing. I also bought a couple of other parts that I needed they have great products, quick shipping and excellent customer service. Will keep buying all of my trailer parts from here 372492



- CE10726A
by:

bought the 11"x 5/8" roller shaft for a 8 inch keel roller and end caps fit perfectly, good quality and fast shipping and was able to track the order easily from my phone. thank you 355547



- CE10726A
by:

Every thing I ordered was what I wanted, Thank You 333153



- CE10726A
by:

Good product, direct factory replacement. Have ordered twice from e trailer and been very happy with quick service , no hassles. 318719



- CE10726A
by:

perfect fit, great quality, fast shippi ng 314231



- CE10726A
by:

Excellent product! The staff at e trailer have been a great help. For all my trailer needs I will use only e trailer. 287002



- CE10726A
by:

happy with product 286703


Comments

working just fine

Eric S - 08/23/2017

27508

- CE10726A
by:

My sales rep Carrieann was pleasant and knowledgeable. Delivery ,prompt. Great price! 285735



- CE10726A
by:

good service & fair prices. 191158



- CE10726A
by:

Very happy with the product. The roller and rod fight perfectly. The demensions were perfect as the were on the order.Fast transaction and shipping. Will be ordering trailer parts again from this company for sure. 188991



- CE10726A
by:

These roller shafts are just as they are described. same quality as the more expensive ones sold by others. I'm very pleased with them and all the products I ordered. 171683



- CE10726A
by:

My keel rollers needed to be replaced on my boat trailer so I ordered the rollers with new roller shafts with pal nuts. I am sure glad I did. When I got around to changing them out, my old roller shafts were rusted and bent. These were a perfect fit and I expect they will last a long, long time. 165482



- CE10726A
by:

Great prices and quick delivery. This is my second order from etrailer and can't say enough good things about them. 164127



- CE10726A
by:

Shafts with pins rather than caps would have been better. I am contemplating getting washers and pins and drilling holes in the shaft ends to get a better fit. The caps make me a little nervous although I have to assume the design has been tested and have stood the test of time. 153289



- CE10726A
by:

Fine, FYI, used this with a 8" roller with two end rollers. Fits fine. 142426



- CE10726A
by:

Exactly what I needed to replace the one on my trailer. 140992



- CE10726A
by:

Purchased this and will have to hacksaw in half because I couldn't find 2 suitable shafts for 4" roller. Mirror surface provides for smooth roller rotation. 137339


Comments

Continues to work perfectly after a year and expect the same for the foreseeable future.

Al f - 06/24/2015

12763

- CE10726A
by:

Perfect fit and good quality. 125043



- CE10726A
by:

For the price of those items could not have gotton a better deal anywhere else. Good quality. Will not shop anywhere else for my boat trailer needs! 97299



- CE10726A
by:

Good price, easy to install doing what a roller shaft does. 93199



- CE10726A
by:

Ordered ten 10" rollers and roller shafts for my boat trailer. Arrived sooner than I expected and I am very pleased with the quality of the product and the service from etrailer. Will use them again for my trailer needs. 58392



- CE10726A
by:

Quick shipping and good products equal Good service. 51545



- CE10700A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


The product is as described. What is more important here is ETrailers willingness to step up on an issue. I paid for overnight shipping but it wasnt delivered. I contacted etrailers and they responded back right away. They gave me a partial refund on shipping though it was not their fault. That is customer service!! I will highly recommend. 187098



- CE10700A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


I have an older Spartan trailer. Parts can be hard to find. Found what I needed at a fair price. Paid extra for quicker delivery. Received what I ordered by the promised delivery date... what more could you ask for... Would definitely order from etrailer again and would recommend them to others. 225849



- CE10700A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


I didn't rate you as overall as excellecnt because the questions I had should have had the answeres there already. When buying parts, all details should be present, such as dimentions on all aspects. This includes measurments and details of mounting holes and other related part mating details. Many people are trying to rehab their trailers and boats, and do not completely know the engineering. Sorry, that's life. I have been very happy with the parts I have purchased, and was extreamly happly with the responsises to my questions. I just think that the details I needed should have already been there. Taking time to send questions is lost productivity, we are not pro-shops, and the delays can cost us much. V/R Stephen (overall, I am very happy with your site. 132837



- 107-30A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Hi Etrailer. What happened to George who wrote me about this about a year ago. Anyway you will figure it out. This has been a slow project because I am an old retired guy living on a surfing beach way down in Mexico. I brought all the parts from you down in my truck about two years ago. All the parts came from you and the steel and paint I bought here in Mexico. I built the trailer in my shop here and had to modify it several times to fit the strange requirements we have for launching off the beach with waves. I never seem to remember to take the camera or my phone to the beach to show that procedure but it is a little involved compared to a tilt trailer on a boat ramp. If I back the trailer into the water the wave action washes the sand out from under the trailer tires and the quad tires and them I am stuck. I have to launch in the hard sand just inland from the waves and parallel to them. The trailer can only tilt until the rear cross member is just above the sand or I cannot pull the trailer out from under the boat with the 500 lb. Honda 4WD quad. We put pieces of 2 inch black irrigation plastic tubing about 6 feet long under the boat as it is coming down off of the trailer as it is pulled out. This gives us old guys the chance to push the boat 90 degrees until it faces the waves. We wait for some larger waves to roll up under the boat and then we push it into the water and away we go when we find a lull in the incoming waves. We use the boat to get to surfing spots and then fish on the way home. The trailer pictures I am sending are showing the tilt stop that is not quite in use as I am just running the engine in my drive way. The fat little tires are for the sand. If this project is of interest to you I have some pictures showing the construction of the trailer that better show some of your hardware. I will also try to remember the camera the next time we launch. Our waves are bigger in the summer time so we will have to wait for a small surf day to play with the boat. Everything that happens here in Mexico is slow and there was some spine surgery that also slowed things down a bit. But a year later I am still surfing and playing with the boat. That's my story and sorry to be so slow. Dean Aldinger Casa Margarita Playa La Saladita Guerrero Mexico. 398414



- 107-30A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Nice product. Worked well for the older trailer. We had to cut it down from 19" to 13" to fit, but all went well. Received our order quickly and item was much less expensive than retail. Would purchase from this site again. Thanks! 154056



- 107-30A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


No problems fit well and works fine. Just a roller shaft. I wish it came in stainless, though. My only suggestion to other customers would be to know that this has to be ordered separately, it does not come with the keel roller and/or the brackets. I ordered these and then realized the shaft was not included and had to order it and wait a few more days to get the job done. Pretty much my own fault. 97926



- CE10727A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


I ordered on Tuesday evening and received what I ordered on Friday morning. Used a band saw to cut off 1/4 inch of the 13" shaft due to my original shafts on my 1994 ProCraft Trailer having 12 3/4" shafts. I'll just have to see if the new rollers last as long as the original rollers, which were also Yates rollers. Representative on the phone was very pleasant to talk to. 545083



- CE10727A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


I recently purchased two Yates keel rollers , one 12" and one 8".... Was very please with the price , shipping , and the products I received !!! Will be happy to order from you guys again. Thanks 125050



- CE10727A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Customer service person that helped me was my hero, I have been looking for those special bolts and she was able to help me and have parts sent the same day. I don't know her name? she was awesome help! 660803



- CE10725A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Really fast shipping. Great company to buy from and good quality products. U need to try them and c for yourself. 654945



- CE10701A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


I got the product quickly and it fit just fine. Everything was great. 653523



- 107-30A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Great product, as advertised. Delivered as fast as that big box website! 651943



- CE10701A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Fast shipping and quality parts. Thanks 650584



- CE10725A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Fit bracket nice 644853



- CE10725A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


These worked great to replace my old ones. The could have been an inch longer and they would have been perfect. There was barely enough length for the pawl nuts to catch. The next size longer was way too long. 642430



- CE10727A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


Correct diameter shaft,length was perfect and caps went on securely. Works great 638502



- 107-30A
by:

Review from a similar CE Smith Roller Shaft Kit in Boat Trailer Parts


The products worked as advertised and functioned well for my application. They were easy to install. etrailer's prices were very competitive and their service was outstanding. 635663


52
263
Show More Reviews

Ask the Experts about this CE Smith Boat Trailer Parts


  • What is Included in the Yates Rubber Boat Trailer Part # YR1000Y
  • The Yates keel roller # YR1000Y you referenced will not include a shaft and pal nuts. You will need to get part # CE10726A which will include 1 shaft and 2 pal nuts.
    view full answer...

  • Brackets to Install Keel Rollers Above a Boat Trailers Frame
  • If I understand what you're trying to do I think we can help. We have the Adjustable Mounting Brackets for Keel Rollers # CE32004G. They'll install onto your trailer's frame and will hold a keel roller that is the width of the frame plus 2 inches. If you need a 10 roller # YR1000Y will work on the brackets using # CE10726A. If I missed the mark and misunderstood you just let me know.
    view full answer...

  • Roller Shaft and Pal Nuts For a Keel Roller with a 5/8 Inch Inner Shaft Diameter
  • You are going to need a 5/8 inch diameter shaft and pal nuts. You could use # CE10721A which comes with both. The shaft is 5-1/2 inches long. We also have other lengths that come with pal nuts: # CE10726A for 11-1/8 inches, # CE10725A for 9-1/4 inches, # CE10727A for 13-1/2 inches, or # CE10722A for 6-1/4 inches. The roller has a 3 inch diameter.
    view full answer...

  • Replacement Yates Keel Roller for Shallow V Beam Boat Trailer
  • The correct roller and shaft with Pal nuts for the # YR10000 roller is the # CE10726A. Without knowing the dimensions of your shallow V beam it would be hard for me to tell you exactly which bracket will work for you. Two of the most common mounting brackets for this roller is the adjustable # CE32004G or the panel bracket # CE10304G. If you wanted to tell me the dimensions you find, I'd be more than happy to help you find a bracket that will work for your application. I have linked...
    view full answer...

  • How to Identify Replacement Bearings & Seals for Magic Tilt Boat Trailer
  • The best way to confirm the correct replacement wheel bearings and seals for your 1999 Magic Tilt boat trailer is to pull one of the hubs and note the inner and outer bearing numbers and seal number. You can then directly search on those part numbers to find replacements. Trailer makers do alternate parts sometimes so even if you have the owner's manual and it says the trailer uses bearings X and Y, they may not be what is in the hubs. It is always best to check the existing parts. We...
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality boat trailer parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate boat trailer part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Jackie C
Written by:
David L
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.