How Does the CE Smith Winch Stand # CE31013G Mount to Trailer

Question

Question:

What is the suggested hardware for mounting the CE31013G winch stand and what are the top holes on the bottom of the mount for ?

asked by: Tony

0

Expert Reply:

To mount the CE Smith Winch Stand # CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle that the trailer calls for.

I attached a picture of a similar product that uses basically the same style of attachment to help you visualize how the stand would mount.

You would need to provide nuts and bolts that would be long enough to pass through the holes.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The CE Smith Winch Stand #CE31013G is basically the complete thing in and of itself. You just need to pick up appropriate hardware to install it to your trailer tongue and then install the actual winch on it and you'll be good to go. The mounting…

view full answer...

Answer 2

Since the Malone EcoLight trailer part #MAL53FR has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…

view full answer...

Answer 3

Hello Dennis, thanks for reaching out. I do have a solution for adding a hand winch to your Yakima EasyRider trailer. The best way to do this is with the CE Smith Winch Stand #CE31013G. This bolts to the 2" tongue and gives you a mounting…

view full answer...

Answer 4

I attached a picture that we recieved from a customer that shows the CE Smith winch mount #CE31013G installed and in use on a trailer for you to check out.

view full answer...

Answer 5

Since the Malone Microsport trailer part #MPG460G has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…

view full answer...

Answer 6

Yes, you can add a winch to the Malone LowBed MicroSport Trailer item #MPG464-LB. You will want to use the CE Smith Winch Stand item #CE31013G. This will fit on the Malone trailer's 2" tongue. This stand is 30" tall and made of…

view full answer...

Answer 7

I do have a solution for you but we don't offer any integrated winch and bow roller setups like the Knot Autoflex. Therefore, you'd have to purchase a winch stand assembly like the CE Smith Winch Stand part #CE31013G which bolts onto the…

view full answer...

Answer 8

I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but everything…

view full answer...

Answer 9

The mounting holes on the bottom of the CE Smith Galvanized Winch Stand #CE31013G measure 7/16-inch. Please refer to the linked photo. This 30-inch tall winch stand is made of 12-gauge steel and is intended for 2-inch trailer tongues. It is…

view full answer...

Answer 10

The strap that you will need to use for the Dutton-Lainson Hand Winch #DL14125 is the 2" x 15' Strap #DL6148. The hook on this strap has a safety latch on it to help keep it secured to the load during operation. You will need a 2-3/4"…

view full answer...

Answer 11

Hi Michael, While we don't have any way of knowing what winch stand goes on any specific trailer, it is possible we have an option for a winch stand for your Karavan trailer. The only option we have for a stand is the CE Smith Winch Stand…

view full answer...

Answer 12

In order to attach the CE Smith Winch Stand part #CE31013G to your boat trailer you would need to cut off the bottom portion of the stand and weld that directly to your trailer's tongue as it is only designed to bolt onto a 2" wide trailer…

view full answer...

How Does the CE Smith Winch Stand # CE31013G Mount to Trailer

Product Page this Question was Asked From

Continue Researching