bing tracking image
  1. Accessories and Parts
  2. Dutton-Lainson
  3. Electric Winch
  4. Mounting Hardware
  5. Plates
Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches
Dutton-Lainson

Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches

Part Number: DL24059
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$40.84
Retail:$66.71
You Save: 39%
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This mounting plate allows you to mount your winch to a trailer winch stand when there is insufficient room or an improper angle. Plate has black, powder coat finish, and kit comes with all hardware required for installation. 1-800-940-8924 to order Dutton-Lainson accessories and parts part number DL24059 or order online at etrailer.com. Free expert support on all Dutton-Lainson products. Great prices and Fastest Shipping for Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (14)
  • Q & A (0)
  • Videos (1)
  • Photos

Dutton-Lainson Accessories and Parts - DL24059

  • Electric Winch
  • Mounting Hardware
  • Plates
  • Dutton-Lainson

This mounting plate allows you to mount your winch to a trailer winch stand when there is insufficient room or an improper angle. Plate has black, powder coat finish, and kit comes with all hardware required for installation.


Features:

  • Mounts winch to trailer winch stand even where there is insufficient room or an improper angle
  • Finished with black powder coat
  • Includes all hardware for installation
  • Made in the USA


Specs:

  • Application: All StrongArm electric winches


24059 Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches





Video of Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for A Closer Look at the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches

Today, we're going to take a look at the Dutton-Lainson Angle Mounting Plate for a StrongArm electric winches. Now, this mounting plate's designed for mounting your StrongArm electric winch to your trailer winch stands where insufficient room and improper angle are usually present. This is finished with a nice black powder coat finish. It does include all the hardware you need for installation of the plate to the trailer. This part is made in the USA. Again, this is an application for all StrongArm electric winches.

That should do it for the review on the Dutton-Lainson Angle Mounting Plate for StrongArm electric winches.

Customer Satisfaction Score:


Customer Reviews

Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches - DL24059

Average Customer Rating:  4.8 out of 5 stars   (14 Customer Reviews)

This mounting plate allows you to mount your winch to a trailer winch stand when there is insufficient room or an improper angle. Plate has black, powder coat finish, and kit comes with all hardware required for installation.

by:

The mounting plate for Strongarm Electric Winch I purchased works great. It was well built sturdy and included all the hardware to complete the mounting of my winch.

Thomas I. profile picture

Thomas I.

1/16/2019

My Dutton-Lainson Strongarm winch is performing great. Plenty of power to pull my boat onto the trailer. I did replace the cable with a belt as the cable would bind from time to time.



by:

Great fast service. Kept me informed during the whole process



by:

etrailer had the exact part I needed. Shipment was prompt and arrived ahead of schedule. Very pleased with their service.



by:

The plate is very well made and made it easy to install my new electric winch on existing post brought it up to level great product



by:

fit well, solid, as advertised



by:

Good heavy product. Shipped right away.
Very
satisfied with service.



by:



by:

Fast delivery



by:



by:



by:



by:



by:



by:


14
14

See what our Experts say about this Dutton-Lainson Accessories and Parts

  • Electric Winch For Use With Boat Trailer
    The Superwinch gets wired to an ignition switch, so it isn't something that is meant for a boat trailer. The fastest 12 volt electric winch that can be powered with a 12 volt battery with a boat trailer is the Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote # DL25220. This is rated for boats up to 9,000 lbs, pulls between 15 ft/minute (no load) and 6.3 ft/minute (full load), and can run for up to 4 minutes at a time, so it will certainly be faster than 2 feet per minute.
    view full answer...
  • Will Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote Work with a 2,500 lb Boat
    The Dutton-Lainson StrongArm 12-Volt DC Electric Winch with Remote # DL25220 is an excellent option for your 2,500 lb boat. The 3,000 lb weight rating is for rolling loads, but this can actually handle up to a 9,000 lb boat, and since you have rollers on your trailer it will just make it that much easier on the winch. To mount this you can either use the mounting plate # DL24059, or the mounting plate # DL24055 depending on what you already have on your setup.
    view full answer...
  • How To Mount an Electric Boat Trailer Winch
    I have some great electric boat trailer winch options for you such as the Dutton-Lainson StrongArm Electric Winch which is what I recommend. These will need to be rated for about half the weight of the boat, so part # DL25215 for example (full selection linked below) can be used on a boat up to 6,000 lbs as it has a 3,000 lb rating. Please note, this is just a general guideline and there are other factors which you can review in the article below if needed. In regards to mounting the Dutton-Lainson...
    view full answer...
    Image 1 for
  • Recommended Mounting Bracket for the Dutton-Lainson DL17042
    As the Dutton-Lainson Hand Winch # DL17042 is typically mounted to a horizontal post or beam on a trailer, we will not have a bracket to mount it vertically. That being said, you may be able to adapt the Dutton-Lainson Mounting bracket # DL24059 to work for your needs, but it will require some doing. If you have the option, it will most likely be easier to drill into the vertical post to get the # DL17042 mounted securely.
    view full answer...
  • Will Dutton-Lainson Angle Winch Mounting Plate Fit a 3x4 Inch Frame and a 4,000 Pound Boat
    I went out to the warehouse to measure the Dutton-Lainson Angle Mounting Plate, # DL24059. The internal width of the U-bolt is 3-1/6 inches. The length is 5 inches. As long as the post is 3 inches wide by 4 inches deep, it will fit. I also spoke with my contact at Dutton-Lainson to get the capacity of the plate. While it does not have an official weight capacity, it is designed for the StrongArm series of electric winches. The highest capacity of a StrongArm winch is 4,500 pounds, so it...
    view full answer...
  • Mounting Plates for Dutton-Lainson StrongArm Electric Trailer Winch, # DL25200
    The Dutton-Lainson StrongArm Electric Winch, # DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the winch. I have included a link to the installation details for this winch for reference. You can use Dutton-Lainson Mounting Adapter Plate, # DL24055, which comes with the mounting plate and the hardware necessary for installation. Or, if needed,...
    view full answer...
  • Does StrongArm Winch Need Mounting Bracket
    The Dutton-Lainson StrongArm Electric Trailer Winch - Marine - 1,500 lbs # TW4015 requires a winch stand or mounting bracket. For the StrongArm you can use the Dutton-Lainson Mounting Adapter Plate for StrongArm Electric Winches # DL24055 if you have a narrow winch stand or the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059 if your stand is at an angle. You will need Dutton-Lainson Quick Mount Kit for StrongArm Electric Winches # DL70309 as well. As for...
    view full answer...
    Image 1 for Image 2 for
  • Can Fulton F2 Fit with Dutton-Lainson Angle Mounting Plate
    Yes, the following parts can be used together: - Dutton-Lainson Angle Mounting Plate # DL24059 - Fulton F2 Fully Enclosed Trailer Winch # FW16000101 - CE Smith Winch Stand # CE31013G - CE Smith Bow Roller Bracket for Winch Stands # CE31005PG The mounting holes for the Fulton F2 are a little wider than what comes on the mounting plate though so you'll have to modify the mounting plate to make it fit. The Adapter # DL24055 won't make it fit any better. We don't have any other winch...
    view full answer...
  • Electric Winch and Battery Charger for Boat Trailer
    So there isn't a recommended size of battery because you'll be using a 12 volt, and there isn't going to be enough difference (in terms of size) that will matter in regards to using one over the other. I also wanted to point out that batteries do not charge from your 7-way, they only get maintained, so to charge a 12 volt battery you will need a separate charger, the NOCO Genius Smart Battery Charger # 329-GENIUS2. Then for an electric winch Dutton-Lainson TW4000 StrongArm Electric Winch...
    view full answer...
  • Will Fulton F2 1,600 Pound Winch Fit Dutton-Lainson Winch Mounting Plate DL24059
    The Dutton-Lainson winch mounting plate # DL24059 has the top 2 holes spaced 2-1/2 inches apart on center and the third hole in the middle is down 3 inches from the center line between the 2 top holes to the center of the third hole. I measured the mounting plate on the Fulton F2 1.6K winch, # FW16000101. It has mounting slots and the top one is 2-3/4 inches wide but the big hole in the center slot is down just 2-1/4 inches from the center of the top slot. The center slot does continue...
    view full answer...
  • Does Dutton-Lainson StrongArm Electric Winch Come with Mounting Bracket
    The Dutton-Lainson StrongArm Electric Winch # DL25215 doesn't come with a mounting plate but you can use part # DL24055 or # DL24059 if your current mounting bracket doesn't match with the mounting hole pattern for this winch (see attached).
    view full answer...
    Image 1 for
  • Dimensions of the Dutton Lainson Adapter plate part # DL24059
    I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part # DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Winch Post/Stand For Boat Trailer With Roller Stop
    It sounds like you are looking for the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. This is designed for a 2 inch by 3 inch frame, so you will need to make some modifications. This is the only winch stand we currently carry. You may also be interested in the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059 and the CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Yellow TPR # CE32015G.
    view full answer...
  • Will the Dutton-Lainson Winch Mounting Plate # DL24059 Fit a Trax Electric Winch
    I am not familiar with the Trax Electric Winches so I am not sure what their mounting plates look like. However, the Dutton-Lainson winch mounting plate # DL24059 has the top 2 holes spaced 2-1/2" apart. Then the third hole in the middle is down 3" from the center line between the top two holes. If your Trax 3500 Electric Winch plate has the same dimentions, this mounting plate will fit your winch. I attached a diagram outlining the dimensions for your convenience.
    view full answer...
    Image 1 for
  • Winch Stand Compatible with Sled Bed Snowmobile Trailer
    The CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G should work on the center beam based on the measurements you gave. The additional height of the center beam won't be an issue as the width is still 2 inches. Because your trailer is 3-3/4 inches tall, this will required mounting directly to the frame instead of using u-bolts around the frame. You will also want to consider using the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059...
    view full answer...
    Image 1 for
  • Recommend Electric Boat Winch for 2,866 Pound Fiberglass Boat
    To load and unload your boat that weighs around 2,866 pounds (1,300 kg), I recommend the Dutton-Lainson TW4000 StrongArm Electric Winch, part # DL25200. This nicely priced but quality electric winch can handle boats of up to 4,000 pounds (1,814 kg) and includes a wiring harness for easy installation. This winch is designed for boats and features a high-impact, weather-resistant case that will protect its internal components and brushed stainless steel front plate for superior rust resistance....
    view full answer...
  • Replacing the Winches on a Sea-Doo Trailer
    When replacing a winch, or winches, on a boat trailer, I always recommend one that ratchets. This way if you every loose grip, you will not need to start all over after the boat or jet ski slides back into the water. So with that being said, the TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs # 348776 will be the option I suggest. This is rated up to 1,500 pounds and will use the standard bolt pattern that most winches follow. However, with the way your current...
    view full answer...
    Image 1 for
  • Will Dutton-Lainson StrongArm Winch DL25010 Work With 2023 Yamaha SX190 Jet Boat?
    They sure will! The following components you were looking at will all work perfectly with your new 2023 Yamaha SX190 Jet Boat: Strong Arm Winch # DL25010 Quick Disconnect Connectors # DL24085 Winch Cover # DL24051 With that said you shouldn't need the Mounting Bracket # DL24059 as your boat trailer should already have a standard winch mount for the winch to install.
    view full answer...
  • Winch Mounting Plate for 3 inch Wide Trailer Frames
    I went out to the warehouse to measure the Dutton-Lainson Angle Mounting Plate, # DL24059. The internal width of the U-bolt is 3-1/6 inches. The length is 5 inches. As long as the post is 3 inches wide by 4 inches deep, it will fit.
    view full answer...
  • Dutton-Lainson Angle Winch Mounting Plate for Use with Master Lock Electric Trailer Winch 2953AT
    The Master Lock Electric Trailer Winch # 2953AT includes a 3-post mounting plate intended for installation on a hitch ball, but this winch could also use the Dutton-Lainson Angle Mounting Plate # DL24059.
    view full answer...
  • Replacement Boat Trailer Winch For Boats Over 4,200LBS
    I recommend using the Dutton-Lainson StrongArm Electric Winch # DL25215. This winch is rated for 9,000lbs and utilizes a polyester strap that is less likely to damage your boat if it were to ever snap like the metal cable did on your last winch. The winch also has a backup manual crank handle for if you lose power. The Dutton-Lainson Angle Mounting Plate # DL24059 will allow you to mount the winch level on your trailer winch stand. And the Dutton-Lainson Winch Cover # DL24051 will protect...
    view full answer...
  • Is There a Boat Winch With a Remote
    There is not currently a boat winch with a wireless remote we offer, though the Dutton-Lainson StrongArm Electric Trailer Winch # TW4015 you referenced comes with a handheld remote and there isn't an option for a wireless remote with this particular winch. This winch can be mounted with Quick Mount Kit for StrongArm Electric Winches # DL70309 for the hardware, and can use Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059. If you have a narrow winch stand the...
    view full answer...
  • What is the Correctly Rated Winch for 5,000 lb Boat With 25 Degree Angle?
    Thank you for the detailed diagram. There is a way to determine the correctly rated winch, and that is to multiply the winch capacity by a factor determined by the degree of the incline. So in your case, 26 degrees, which would make the Dutton-Lainson StrongArm Electric Winch - Marine # DL25215 the option I recommend. It has a 3,000 lb capacity so you need to multiply 3,000 by 1.86 (the correct number for a 26 degree incline) and that will tell you the capacity of this winch for your...
    view full answer...
    Image 1 for Image 2 for
  • Recommendation for Electric Winch To Pull 24 Foot 3300-Lb Grady White Boat on to Trailer
    Because of the length of your boat I would recommend the Dutton-Lainson StrongArm Electric Winch, part # DL25200. This DC-powered winch is designed for boats up to 4,000 lbs and includes a wiring harness for easy installation. I am including a link to the installation instructions on the winch. The Master Lock Electric Trailer Winch, part # 2953AT, you have referenced, has a maximum boat weight capacity of 5,000 lbs , but only a maximum boat length of 18 feet. I would not recommend this...
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Sarah H
Expert Research:
Sarah H
Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924