See what our Experts say about this CE Smith Boat Trailer Parts

• Trailer Mounted Bracket for a Bow Stop for Jon Boat
  You could use a bracket such as # CE31005PG for bow stop # YRJONBLOCK. A lot of trailers use this type of bracket for bow stops. I have also included a link to all of the brackets we carry.
  view full answer...
• Can Fulton F2 Fit with Dutton-Lainson Angle Mounting Plate
  Yes, the following parts can be used together: - Dutton-Lainson Angle Mounting Plate # DL24059 - Fulton F2 Fully Enclosed Trailer Winch # FW16000101 - CE Smith Winch Stand # CE31013G - CE Smith Bow Roller Bracket for Winch Stands # CE31005PG The mounting holes for the Fulton F2 are a little wider than what comes on the mounting plate though so you'll have to modify the mounting plate to make it fit. The Adapter # DL24055 won't make it fit any better. We don't have any other winch...
  view full answer...
• How To Replace a Knot Autoflex Winch and Bow Roller Assembly On a Boat Trailer
  I do have a solution for you but we don't offer any integrated winch and bow roller setups like the Knot Autoflex. Therefore, you'd have to purchase a winch stand assembly like the CE Smith Winch Stand part # CE31013G which bolts onto the tongue and allows you to mount a winch like the Fulton F2 Fully Enclosed Trailer Winch part # FW20000301 and bow roller like the Bow Roller Assembly part # YR300B-325B when using the CE Smith Bow Roller Bracket for Winch Stands part # CE31005PG. You may...
  view full answer...
  
• Bow Roller and Mounting Bracket Recommendations for Boat Trailer
  The best part about boat trailers is that everything is universal so a lot of the parts you add to them are about preference and have to do with the type of boat you're carrying. I recommend checking out the CE Smith Bow Roller Assembly with Bells for 3" Wide Bracket # CE29334 and pairing that with the CE Smith Bow Roller Bracket for Winch Stands # CE31005PG. This is a pretty standard size for a bow roller and it comes with hardware to mount to the bracket that, in turn, mounts to your...
  view full answer...
  
• Replacing Bow Strap and Winch Mount on on Older Shoreline Sailboat Trailer
  That's a really interesting setup. We aren't really going to be able to help much if you want to use that winch mount in it's current configuration. If you could instead mount the winch like in the picture I attached you could then go with a different bow roller possibly. You'd be able to use the bow roller part # YR450Y-400Y you mentioned as well as the bracket part # CE31005PG.
  view full answer...
  
• Dimensions of Bolt Holes on CE Smith Bow Roller Bracket for Winch Stands # CE31005PG
  The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, # CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part # CE10700A. The bolt through hole size for the winch shaft bolt is .75 inch diameter. I have included a diagram that shows the dimensions of the bolt holes for the bracket.
  view full answer...
  
• Looking for a Replacement Handle for a Knott Autoflex Hand Winch
  If you were looking for a replacement handle, the hole opening on the Replacement Quick Attach Winch Handle for Dutton Lainson Winch - 9-1/2" # DL70330 will measure 15/32" by 5/8" and looks like it will be a good replacement for your Knott Autoflex winch. I do suggest measuring to confirm this though. However, if you are referring to the shaft/handle to change from one speed to the other, you will need to contact Knott directly. This is not a winch we carry so I cannot say if any of our...
  view full answer...
  
• All Parts Needed To Add A Winch To A Kayak Trailer
  I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but everything else is. CE Smith Bow Roller Bracket for Winch Stands # CE31005PG CE Smith Winch Stand # CE31013G Yates Bow Roller - 3" Long - 1/2" Shaft # YR3143-4 Fulton Single Speed Trailer Winch - 7" Long Handle, 12' Strap - 900 lbs # F142007
  view full answer...
• Replacement for Knott 6S5810.001 AutoFlex 2500 lb 2-Speed Trailer Winch
  We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part # 315-W2500D • Winch Stand, part # CE31013G which is compatible with 2 inch wide pole tongues • Bow Roller Bracket, part # CE31005PG • 3 Inch Bow Roller, part # YR300B-325B
  view full answer...
  
• Using Two Bow Stops on Either Side of a Boat Trailer Winch
  This trailer was either set up this way by the manufacturer or the owners had to fabricate some extensions and then attach brackets and the stops to make this set up. Extensions would have to be fabricated by a machine shop or a welder and then you could use a bracket such as # CE31005PG with jon block # YRJONBLOCK.
  view full answer...
  
• Recommended Flat Bow Stop for Tracker Trail Star Trailer
  I am not familiar with the exact bow stop you have pictured but we do carry a few options such as the Yates Flat Bow Stop for Boat Trailers part # YRJONBLOCK which is what I recommend using. It's designed to be used with a bracket such as the CE Smith Bow Roller Bracket part # CE31005PG. The bracket may require some modifying for your specific setup.
  view full answer...
  
• Diameter of Hole for Mounting Shaft of # CE31005PG
  The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, # CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part # CE10700A.
  view full answer...
  
• Recommended Bow Roller Bracket for 4 Inch Wide Winch
  The closest bow roller bracket for winch stands that we have to the dimensions you listed is the CE Smith # CE31005PG. This bracket is 13-3/16" tall and is designed to fit around a 3-1/2" wide winch. We do not currently offer any brackets that are designed to fit around a 4 inch wide winch. I have also included a link that takes you to our selection of brackets for you to look at.
  view full answer...
• Mounting Bracket And Y-Stop Needed For A Boat Trailer With A V Hull Boat
  Hey Steve, We currently offer the CE Smith Bow Roller Bracket # CE31005PG, which bolts onto a 3-1/2" wide winch stand and would allow you to mount a Boat Trailer Rubber Y-Stop # DL21732.
  view full answer...
• Winch that Could Fit in CE Smith Bow Roller Bracket # CE31005PG
  The inside width of the CE Smith Bow Roller Bracket # CE31005PG has an internal width of 3-11/16 inches so for a winch that is narrow enough to fit inside that we have the # DL16001 which measures 3-3/16 inches in width.
  view full answer...
• Can Y-Shaped Bow Stop Be Replaced with Bow Roller On Boat Trailer
  If you are referring to a bow stop such as the Yates Y-Style Bow Stop for Boat Trailers part # YR7Y44-4 then yes you can replace this with a bow roller such as the Bow Roller Assembly part # YR450Y-400Y which won't mark the boat. This can then be used with the CE Smith Bow Roller Bracket for Winch Stands part # CE31005PG or you can match one to fit the bracket you have now from the list below.
  view full answer...
• Winch Post Setup and Winch Recommendation for 2000 Four Winns Vista
  Typically the bow eye/hook will sit just below the roller stop. In addition to making for an easier retrieval, having the bow eye below the roller also provides a safety measure. The potential danger of your current setup is that in the event of an accident on the road there's nothing keeping the boat from launching up that roller and into the back of your tow vehicle. If you have the bow stop above the eye/hook (with the winch strap below it) the bow can't get over the stop. We currently...
  view full answer...
  
• Bracket For The Bow Roller Assembly YR450Y-400Y
  The CE Smith Bow Roller Bracket for Winch Stands # CE31005PG will work with The Bow Roller # YR450Y-400Y. The bracket accepts any 3 inch to 4 inch bow roller or Y-stop. The bracket is made out of 11-gauge pre-galvanized steel that can be painted to match your trailer. The bracket has a bolt-on installation but does not come with the included mounting hardware. I attached a review video link below.
  view full answer...
• Can Bow Eye Safety Chain be Ran to CE Smith Bow Roller Bracket # CE31005PG
  You would not want to attach a safety chain for the boat bow eye to the # CE31005PG. While this is a sturdy bracket that is designed to have a winch mounted to the base it's not rated for having a safety chain attached to it. You want the bow eye safety chain attaching directly to the boat trailer frame.
  view full answer...
• Bow Stop Setup Availability for a Boat Trailer
  I believe you are talking about a bow roller like the part # CE31005PG. I recommend bow stop # YR7Y44-4 used with bracket # CE31005PG and shaft # CE10700A for your bow stop set up.
  view full answer...
• 3-1/2 Inch Wide Trailer Boat Winch For Use With Bow Roller Bracket
  Hey Scott, We do have a trailer winch with the 3-1/2" wide measurement you need to go with the CE Smith Bow Roller Bracket # CE31005PG. What you can use with this is the Fulton Single Speed Trailer Winch # F142102. This has an 1,100 lb capacity and even includes a 20 foot strap like you were wanting.
  view full answer...
• Parts Found In Pictures for CE Smith Bow Roller Bracket # CE31005PG
  The Fulton Single Speed Winch # F142306 appears to be the closest winch that we have to the one in the picture with the CE Smith Bow Roller Bracket for Winch Stands # CE31005PG. It has a similar mount and frame connection with the crank handle and switch in similar positions. I cannot tell you exactly what winch was used for this photo as it is a manufacturer image and likely the winch may no longer be in production. This winch has 1,800lb capacity and includes a 20' strap with 9" handle....
  view full answer...
  
• Bow Stop, Bracket, and Shaft Recommendations for a Boat Trailer
  You will need a bracket that has a 3/8 inch diameter shaft. At this time we do not offer a 3/8 inch diameter shaft. I recommend bow stop # YR7Y44-4 used with bracket # CE31005PG and shaft # CE10700A for your bow stop set up.
  view full answer...
• Availability of 2 Inch Bow Roller Bracket for Boat Trailer
  We don't offer a 2 inch bow roller/bracket. The smallest we offer is a 3 inch, like part # CE29334. The shaft and hardware is zinc plated for corrosion resistance. The roller bracket, like # CE31005PG is pre-galvanized which means it was galvanized before it was formed into its finished shape. We don't offer the hardware for mounting the bracket to the trailer.
  view full answer...

Do you have a question about this Boat Trailer Part?