This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points beneath vehicle Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port near the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Running/tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear of your vehicle.
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points behind tail lights Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Adapter is wired for: 1995-2009 Dodge Ram 1500/2500/3500, Full Size, all models 1997-2011 Dodge Dakota Pickup w/Factory Tow Package 1998-2009 Dodge Durango w/Factory Tow Package 2007-2009 Chrysler Aspen w/Factory Tow Package Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
Hey, Rock. The Bright Way 12V onboard battery charger part #BRW49FR that you are looking at will only work with led acid batteries. We do have one that will work with an AGM battery. You can go with NOCO GEN part #NOC54FR for 5 amps or the NOCO…
Hey Kienan thanks for the picture. The only solution I have for you is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item #C59236. This is a universal wiring harness that uses clamps instead of splicing and cutting wires.…
Hello Jeff, Thank you so much for the pictures, they are most helpful. Yes, the Dexter Trailer Brake Drum for 12,000-lb and 15,000-lb Axles - 12-1/4" x 5" - 8 on 6-1/2 #DX34XR is the correct dexter drum to replace your Lippert Drum Drum…
Hi Nate; the Terran Axle Trailer Idler Hub Assembly #TX33VJ uses the standard 3,500 lb bearing combination and grease seal. It has a #L68149 inner and #L44649 outer bearing with a #58846 (10-19) grease seal. If you're looking for a replacement…
Hey Mark, we have 7-way trailer wiring that fits your 2025 Kia Sorento with the Tekonsha part #TK24FR. This is a complete kit that comes with everything needed to install a 7-way including brake controller wiring. Does your trailer have brakes?
The 10 degree up Torflex axle will have the center of the spindle sitting about 0.31" below the bottom of the frame of your trailer under no load. When it is under a full load it will sit about 1.45" above the bottom of the frame of your…
Hey Darrick, thanks for reaching out! To replace the safety chain loops that came with your B&W Turnoverball Underbed Gooseneck Installation Kit #BWGNRK1020, you need the Kit #BW1900-2-1600. This kit has the U-Bolts spaced 2" apart on center…
I have an option for you, but I spoke to my contact at Bulldog to try and get a replacement cross shaft for you and he said they are not available. He said that you will just need to get a 12 inch long section of 1 inch cold rolled steel and then…
The U-bolt in the B&W Replacement Safety Chain U-Bolt Kit, #BW1900-2-1600, measures 3-1/4 inches long x 2-1/2 inches wide. The inside measurement of the U-bolt is 1-9/16 inches. The U-bolt is also 1/2 of an inch in diameter. The attached photo…
Hey Rob, for your 2021 Jeep Grand Cherokee I would recommend the Prodigy P3 part #TK28ER which comes with a custom fit harness designed for your Grand Cherokee. The P3 is the nicest controller around due to how easy it is to use and setup and how…
Let's begin with the brake controller. Redarc makes a great product, but unless you plan on towing overland you won't ever need or use the user-controlled mode offered by the #RED44FR Tow-Pro Elite. I'd recommend the Redarc #RED24FR…
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tow Ready Brake Controller Adapter To install your electric brake controller you need to connect the wiring of the controller to your vehicle.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into the built-in harness in your cargo area and then route it up to your dash so you can plug in your brake controller.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Length: 19-1/2' Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter For most applications, the factory plug is located beneath the dash, near the center console.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
Tow Ready Replacement Plugin Harness for the Tekonsha P3, Voyager, Prodigy, and Primus Brake Controllers. Also works with Draw-Tite Intella-stop Xtreme, Intella-stop Ultra, Intella-stop Digital, and Activator III (5520) brake controllers.
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification light bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Single-wire design.The housing and lens of each light are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated or P3-Rated Lights A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
14-1/4" Long x 1-3/16" tall. Waterproof identification light bar with 3 replaceable incandescent lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Male 0.180 bullet.The housing and lens of each light are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated or P3-Rated Lights A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification light bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Male 0.180 bullet.The housing and lens of each light are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated or P3-Rated Lights A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
14-1/4" Long x 1-3/16" tall. Submersible identification light bar with 3 replaceable incandescent lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Male 0.180 bullet.The housing and lens of each light are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated or P3-Rated Lights A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
3/4" Marker and clearance light. Installs in a cutout with the built-in grommet. Has bullet connectors for a plug-in installation.Features: Round marker/clearance light Red LED with clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Recessed mount with built-in grommet Male bullet connectors plug into trailer wiring DOT compliant Meets FMVSS P2 P3 PC requirements Specs: Overall dimensions: 3/4" diameter x 15/16" thick Compatible with 12V DC systems Diodes: 1 Lead: 12" long
3/4" Marker and clearance light. Installs in a cutout with the built-in grommet.Features: Round marker/clearance light Amber LED More efficient and durable than incandescent bulbs Polycarbonate housing and lens Recessed mount with built-in grommet Hardwired with staggered male/female plug DOT compliant Meets FMVSS P2 P3 PC requirements Specs: Overall dimensions: 3/4" diameter x 15/16" thick Compatible with 12V DC systems Diodes: 1 Lead: 12" long
Replace a faded or broken trailer marker light with this compact red LED light. The sealed polycarbonate housing and lens stand up to wet roads, while the self-grounding design keeps installation simple.Specs Light Function: Light type: Clearance or side marker light Light color: Red Lens color: Red Diodes: 2 FMVSS rating: P2 and P3 Electrical: Voltage: 12V DC Amp draw: 0.046 amps Connection type: Hardwired Wire design: Single wire Ground type: Self-grounding through mounting hardware Construction: Housing material: Polycarbonate Lens material: Polycarbonate Mount type: Surface mount Mounting hardware: Two #10 screws, sold separately Mounting-hole spacing: 1-7/8" center to center Dimensions: Overall dimensions: 2-1/2" wide x 1-1/16" tall x 11/16" deep Shape: Oblong Weight: 0.088 lbs Warranty: Warranty: Lifetime LED warranty
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mounting bracket and plug (both sold separately) for installation. Amber lens. PC rated.
Filters
