This rounded, triangular LED light can be used as a clearance or cab light. This PC-rated light functions as both a marker and clearance light when mounted properly at a 45 degree angle. The red light measures 3-1/2" long x 2-3/4" wide x 1-11/16" deep. Lens and housing are one unit that is sonically sealed and waterproof, providing protection to the 15 light-emitting diodes. The light draws 0.109 amps at 12.8 volts. The molded plastic housing and durable lens provide all-weather protection against corrosion. This light mounts on 1-1/2" centers. The two-wire design includes the lead and ground wires to mount to any surface.
Manufacturer Cross Reference
Light will work as an exact replacement for:
Maxxima # M20310Y
Sealed red 15-diode LED cab light. PC-rated light that functions as both a clearance and side marker light when properly mounted on a 45 degree angle. All-weather, molded plastic housing and durable lens protect against corrosion. Design includes both lead and ground wires for mounting to all surfaces.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number CBL22RB. This is the Optronics Triangular LED Trailer Clearance and Side Marker Light. It can also be used as a truck cab light. This is a PC rated light, so it can function as both a clearance and side marker light when mounted at a 45 degree angle. We're looking at a sealed, waterproof housing and lens unit. It's got the nice weather resistant design.
It's also going to be corrosion resistant. The light's going to contain 15 LEDs. It's pretty small, but I double checked and counted in there, we have 15 LEDs. Those are going to be Light Emitting Diodes. LEDs are going to be great replacements for incandescent lights.
They're going to last longer. They're going to burn brighter, and they're going to be much more efficient. You don't have to worry about replacing your bulbs, and you don't have to worry about brittle filaments when using an LED system. Again, it's got the weather and corrosion resistant design. It is SAE and Department of Transportation compliant. You see right here that it does come with a foam gasket.
That's going to provide some cushion to the mounting surface, and act as a moisture barrier. Here on the bottom side, that's where we're going to have our mounting locations. To gain access to those, you just place in the hardware through the top here. It's got the nice little holes that go all the way through the unit, and then come out the bottom. It is designed to be a surface mount installation.
Nice, flush mount design. The foam gasket also has the cutouts for the holes. All you have to do is pop those out, and it'll allow the hardware to come right through. Those mounting holes are going to be separated apart from one another on center, by an inch and a half. Your mounting hardware is sold separately. You can also see that we have the two wire design. White wire is going to be our ground wire. It has a nice ring terminal on there so we can easily attach that. The black wire is going to be our power wire. We're going to go over our external dimensions, then we'll be able to hook it up to our external power source to see what it looks like. Overall length is going to be about 3 1/2". The width, down here at the bottom at the widest point. We're looking at about 2 3/4". And then the depth, from front to back, we're looking at 1 11/16". Go ahead and place this back on there, and then we'll connect it to our power. Again, white wire is going to be for ground, black wire is going to be for power. Now we'll go ahead and turn off our overhead lights. You can see here the light sends out a really nice clear, consistent signal. A really nice sleek design to it. Again, it's going to contain 15 diodes, 15 LEDs. The multi-diode design is really going to help our light output. Overall, it's a nice solid, sleek light. That's going to do it for today's look at part number CBL22RB. This is the Optronics Triangular LED Trailer Clearance and Side Marker Light. It can also be used as a truck cab light.
Average Customer Rating: 5.0 out of 5 stars (10 Customer Reviews)
We purchased these LED lights to replace the ones that came on the motorhome. They were very easy to install and are very bright! We are very pleased with them and especially the price! 610380
All parts were recieved in good conditi on. 603154
Bright, classic style, love it. 466717
Excellent response. Fast delivery. Product reviews are spot on. Quality products. Can't go wrong with e Trailer. 298188
Look great and were easy to install once I found some screws. 248487
Fast free delivery. 177742
Much brighter than the old incandescent bulbs. Very good off-axis illumination. Nice thick gasket. Fit perfectly on my vehicle. 163092
Fast shipping! I cannot wait to get them hooked up! Perfect shape and size for a vintage Scotty Camper! 152916
Exactly what I was looking for. 144843
Very close to the original 1976 marker lights but LED! Should work great! They haven't been installed yet so no pictures. 128619
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.