What Wiring Harness for a Brake Controller is Part Number 22292?

Question

Question:

I am trying to find a wiring harness for a brake controller. On line, I saw a harness that would work. It was part number 22292. Is it still available? Has the number changed? Thanks.

asked by: Chip J

1

Helpful Expert Reply:

The wiring harness that you are seeking would be the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, and it is indeed part # 22292. It will work with a host of brake controllers, including the popular Prodigy series, but must be a fit for your vehicle.

I've added a link to a video review of this adapter for you to take a look at.

expert reply by: Kyle S

1

Answer 1

Hi David, the Tekonsha Plug-In Wiring Adapter #3034-P is different than the #22292. Neither is verified by Tekonsha to fit your 2024 Ford Ranger, though there has been anecdotal evidence the latter can work with some '24 Ranger models equipped…

view full answer...

Answer 2

Yes, there is! Since your 2023 Ford Expedition came with the factory 7-way you will have a brake controller port to use the Plug-In Wiring Adapter for Electric Brake Controllers item #22292 to install the Prodigy P3 item #90195 without cutting or…

view full answer...

Answer 3

Yes, brake controller wiring harness #22292 and 3036-P are the same wiring harness. No matter which number it has on it the harness will fit the following vehicles: 2009 - 2016 Ford F-150 with factory 4-Flat or 7-Way 2012 - 2016 Ford Flex with…

view full answer...

Answer 4

Hey Matt, thanks for reaching out! The Furrion Chill HE Kit #FR45TD is a great option to replace your current Dometic AC unit, and it comes with the air distribution box, control unit, and wall thermostat. It also has the new R32 refrigerant which…

view full answer...

Answer 5

The best replacement we have for your Innoflame RV48D80L-1 fireplace is the Furrion Electric RV Fireplace with Crystals #FF40SW15ABL. This fireplace is a bit smaller, measuring 39-7/16" wide x 17-3/4" tall x 6-1/4" deep, has 4…

view full answer...

Answer 6

Hi T.J.; thank you for providing that information and the picture. The correct replacement circuit board for your MaxxFan is the #MA10A04751KS which is the same as the 10C04751KS you referenced.

view full answer...

Answer 7

The correct brake controller install harness for your 2018 Ford F-450 is the part #22292 and there is two possible locations for where to find the connector on your truck. Most of the time it's below the dash behind the steering column. The other…

view full answer...

Answer 8

It looks like your 2018 Jayco Redhawk 29xk was built on a E-450 cab and chassis. The Tekonsha Plug-In Wiring Adapter item #22292 will plug into a port behind the instrument cluster finish panel in the center of the dash on the driver's side. I…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What Wiring Harness for a Brake Controller is Part Number 22292?

Featured Help Information

Miscellaneous Media

Continue Researching