How do I Determine when My Equa-Flex Cushioned Equalizers Needs to be Changed?
Updated 04/21/2026 | Published 04/16/2026 >
Question:
How do I determine when it is worn enough to need replacement? The lower arms on mine have approximately 3/8” gap on each arm from rubber when pulled down. Is his too much” rubber looks good, no visible cracks or damage.
asked by: Kenneth W
Expert Reply:
Hello Kenneth,
Great question!
You’re looking at this the right way. With the EquaFlex, it’s not just about how the rubber looks, it’s about whether it’s still doing its job. That rubber core should stay slightly compressed at normal ride height and only flex when the suspension moves. If you’re seeing a noticeable gap when it’s unloaded, it usually means the rubber has taken a set and isn’t working like it should anymore.
A gap around 3/8 inch on each arm is getting into the worn range. Something like 1/8 inch is pretty normal, around 1/4 inch is moderate wear, but once you’re closer to 3/8 inch, it’s usually past its prime even if the rubber still looks good with no cracks.
The main concern with letting it go too long is added stress on the suspension and tires. When the equalizer isn’t absorbing movement like it should, that force gets transferred into the leaf springs, hangers, and tires, which can lead to uneven tire wear or premature component wear over time.
A simple go/no-go check is to look at it with the trailer fully loaded and sitting level. The arms should be close to level with the rubber clearly engaged. If they’re drooping or the rubber doesn’t look compressed, that’s a good sign it’s time to replace it. At around 3/8 inch of gap, I’d consider that a “plan to replace soon” situation, especially before any longer trips.
They no longer make the exact equalizer you have, but a really solid replacement is the MORryde 14-3/4" Shock Absorbing Equalizer # MR34AR. It’s a great upgrade and you’ll likely notice an improvement in ride quality.
Looking things over for the next big trip? What adventure are you off to this time?
Product Page this Question was Asked From
MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 14-3/4 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 25 1/4 leaf spring
- Search Results: 4 leaf trailer leaf springs
- Search Results: morryde 3000
- Video: How To Choose Camper Leaf Springs
- Shop: Bronze Bushings - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 4
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Search Results: military discounts
- Search Results: prodigy p3
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: 15x6 rims
- Q&A: Looking For Upgraded Equalizer And Wet Bolt Kit For 2006 Arctic For 26x
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Brake Controller
- Search Results: trailer suspension parts
- Video: Installing the MORryde Rubber Equalizers on a 2018 Grand Design Momentum 5W Toy Hauler
- Q&A: What Are the Correct Replacement Leaf Springs for 6,000 lb Axle
- Q&A: Best Equalizer Suspension Upgrade For Tandem 3,500 lb Axles
- Q&A: Determining If Equa-Flex Equalizers LC314336 Will Fit 2020 Coachmen Freedom Express 257 BHS
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Q&A: Recommended Brake Controller for 2003 Ford F-250
- Video: Review of EMCO Trailer Leaf Springs - 5 Leaf Double Eye Spring 6000 lbs Trailer Axle - EM76RB
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: All About the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Q&A: How To Measure For Axle Spacing And Choose The Correct Replacement Suspension Kit
- Q&A: Link Plates For Equal-i-zer Weight Distribution Hitch to Fit a 8" Tall Frame
- Shop: Trailer Hitch
- Shop: Suspension Enhancement




Kenneth W.
4/16/2026
Thank you for a quick reply and thorough answer. I will plan on replacing the equa flex later this year.