Hi Lou! There is absolutely no problems installing the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle #F2703 with an existing B&W Turnoverball gooseneck hitch in your 2012 Ford F-250. This kit was actually specifically…
Hey Darrick, thanks for reaching out! To replace the safety chain loops that came with your B&W Turnoverball Underbed Gooseneck Installation Kit #BWGNRK1020, you need the Kit #BW1900-2-1600. This kit has the U-Bolts spaced 2" apart on center…
The U-bolt in the B&W Replacement Safety Chain U-Bolt Kit, #BW1900-2-1600, measures 3-1/4 inches long x 2-1/2 inches wide. The inside measurement of the U-bolt is 1-9/16 inches. The U-bolt is also 1/2 of an inch in diameter. The attached photo…
Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
Hey Michael, thanks for reaching out. So, there isn't a square panel for the Redarc Tow Pro liberty controller, so if you want to use that on your 2025 Tacoma, you will have to do so without the panel. That said, what you can do is get the Redarc…
Hey Conyers, if its the original Prodigy brake controller it is not compatible with electric over hydraulic brakes but if it's the P2 #90885 it is. The easy way to tell the difference is to look at the color of the numbers on the display of the…
The Kodiak Dacromet Disc Brake Conversion Kit, item #K2HR35D, would be a good choice for conversion to disc brakes on your boat trailer. We have not had the opportunity to do a video installation for the disc brake conversion yet, but I will go…
The wire bundle to install a brake controller on a 2008 Chevy Suburban is tucked up under the dash but may be more to the left of the steering column than on GM trucks. It is most likely tucked up above other components or wiring. There should be a…
I have 2 part numbers for you to replace the cradle for your Tekonsha Prodigy P3. Part #TK5901 is the cradle, #TK5904 is the bracket that screws into the dash. You would have to assemble these to parts to have a complete mounting bracket.
It's actually more simple than you think, but they don't make a 4/7 way connector for your 2013 Honda Pilot, so you will need to piece it together. To start, you'll need to use the Tekonsha #118265 kit for your 2013 Honda Pilot and then…
Hey Karen, so your 2022 Hyundai Santa Cruz Premium does have the tow package based on what you have mentioned. So what you need to convert your 4-way to a 7-way and install a brake controller as easily as possible is the Curt 7-way kit part #C68JR…
Hello Evan, I can help clear this up. The Curt T-Connector #C68JR that you mentioned is for vehicles already equipped with the factory tow package. Meaning there will be an OEM brake controller plug already present under the dash and the brake…
Filters
