We'll connect you with nearby partnered installers who know this exact setup.

RV Ride Control

Correct Track Trailer Alignment and Lift Kit - Single Axle

Part Number: LC87120

58 Reviews | 107 Questions

In Stock

$212.04

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

rv ride control trailer suspension parts boat camper car hauler snowmobile utility double eye springs

rv ride control trailer suspension parts double eye springs lc87120

rv ride control trailer suspension parts alignment and lift kits

rv ride control trailer suspension parts boat camper car hauler snowmobile utility double eye springs lc87120

rv ride control trailer suspension parts alignment and lift kits double eye springs lc87120

rv ride control trailer suspension parts alignment and lift kits correct track kit - single axle

rv ride control trailer suspension parts boat camper car hauler snowmobile utility lc87120

Show All (9) Product Images

Show Fewer Product Images

Customer Photos

Correct Track Trailer Alignment and Lift Kit - Single Axle customer photo

Show All (2) Customer Images

Show Fewer Customer Images

Videos

Correct Track Trailer Alignment and Lift Kit Review

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axle with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation. Great Prices for the best trailer suspension parts from RV Ride Control. Correct Track Trailer Alignment and Lift Kit - Single Axle part number LC87120 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (58)
Q & A (0)
Related Parts
Photos

RV Ride Control Trailer Suspension Parts - LC87120

Highlights

Raises trailer 1-1/4" or 2-1/4": Levels trailers when towing with taller trucks.
Corrects axle alignment up to 1/2": Keeps tires tracking straight to prevent uneven wear.
Adjusts in 1/4" increments: Fine-tunes axle placement for smoother, stable towing.
No-drill install: Bolts to existing hangers for quicker at-home setup.
Works with double-eye leaf springs: Fits common single-axle suspension setups.
Includes plates and hardware: Provides what’s needed to lift and align the axle.

Features to know about

Level Towing with Lifted Trucks: Adjustable 1-1/4" or 2-1/4" Trailer Lift

When your trailer sits nose-high behind a tall truck, handling suffers and weight distribution gets thrown off. This alignment and lift kit raises the trailer 1-1/4" or 2-1/4" for a level, stable tow. The brackets bolt to your existing hangers to create a lower spring mount without drilling or welding. That simple change restores proper geometry and keeps your setup balanced no matter how high the tow vehicle sits.

Even Tire Wear and Smooth Tracking: Axle Alignment in 1/4" Increments

Uneven tire wear or a trailer that pulls to one side often means the axle is slightly out of line. This kit solves that with built-in alignment correction plates that move the axle up to 1/2" forward or rearward, adjustable in 1/4" steps. By getting the axle square again, your tires last longer, fuel mileage improves, and the trailer tracks straight behind you.

Extra Ground Clearance for Driveways and Rough Roads: Taller Ride Height

Scraping the bumper or dragging jacks over steep driveways gets old fast. The lift from this kit gives you more clearance everywhere—useful for uneven campsites, off-pavement spots, or steep entrances. It raises the frame without altering spring geometry so your ride stays firm but controlled.

Fits Standard Leaf Spring Setups: Simple Bolt-On Design

Designed for single-axle trailers and RVs with double-eye leaf springs, this system works with hangers 3" wide x 3-3/4" or 5" tall and springs up to 2" wide. It installs cleanly with the included plates and hardware, no drilling required. You get four suspension plates, four alignment correction plates, and a straightforward way to fine-tune ride height and alignment in one step.

Specs

Application

Application: single-axle trailers and RVs with double-eye leaf spring suspensions

Compatibility

Minimum required distance from I-beam to spring mounting hole on hanger: 2-5/8"
Works with: 3" wide x 3-3/4" tall hangers or 3" wide x 5" tall hangers and leaf springs up to 2" wide

Dimensions

Plate length: 4-1/4"

Warranty

Warranty: 90-Day warranty

Note

Note 1: This does not work with MORryde CRE3000 equalizers.
Note 2: If you want 2-1/4" of lift you will need an additional single axle system for the center brackets.

9005934 Correct Track Trailer Alignment and 1-1/4" or 2-1/4" Lift Kit - Single Axle

Installation Details LC87120 Installation instructions

Customer Satisfaction Score:

86% were satisfied with this product

14% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

14% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Did not arrive in time

4.3

58 reviews

5 Stars		(37)
4 Stars		(11)
3 Stars		(4)
2 Stars		(1)
1 Star		(5)

by: Cj 12/07/2025 One Year Later

The brackets work as designed, but the quantity needs to be adjusted. It says single axle, but having just 2 pair in the kit only allows for install on one leave spring, not the pair (one on each end of the axle). 2 brackets and 2 drilled plates are required per leaf spring hanger. Also, they should be wet bolts, these cannot be lubricated without disassembling the kits. Or at least a part number should be provided to obtain wet bolts, as these bolts are longer than standard due to the extra width caused by the brackets.
With the attached pics, you can see that you can offset one end of the axle to have it square with the frame. In my case I left one end centered, and offset the other end. But in a really bad alignment, both sides could be offset forward or back as needed.

Click to Enlarge

by: Tommy G 04/08/2026

This is a straight-forward hardware design and installation. I did it myself with some careful planning and setup. I installed it on a dual axel 5th wheel which took about 10-12 hours total including staging, setup, tools, and cleanup. I would give it a rating of 5 as far as design. A rating of 5 for Adam as parts ordering customer service and communication was excellent. However, due to the need for better install instructions and use for a dual axel I rated it 4 overall.

As a lesson learned on the first side, broke the work up into 2 separate days and suggest you modify or include instructions for installing on a dual axel. This is not an owner install product for dual axel unless you are very mechanically oriented with a fine selection of tools and ancillary equipment to perform it. For instance, you will need appropriate tall supports and jack tools for axel support as well as frame support. The spring spacers need cutting/grinding if you have supports less than 2 inches, the self-tap screws need to be predrilled or you'll never get through the metal and need clean newly sharpened hard steel bits (suggest a couple, with sharpening after 3 holes). Also, appropriate alignment of parts can only be accomplished by removing the spring attachment at the center equalizer and the second axel at each side requires both tires off at the same time to do the second spring in order to get the axel to move enough for alignment adjustment. Last, plan on a tap and die set to chase the center equalizer spring screws as the threads get minor damage during removal based on minor spring shifting. I haven't towed yet and will add another review at a later date based on performance.

Mike L.

4/9/2026

Thanks for sharing your tips and insight Tommy!

by: Richard 11/30/2021 One Year Later

All the parts are quality made, but I had to replace the axle and didn't need to use the Correct Track Trailer Alignment and Lift Kit.

by: Michael 10/29/2017

The listing for this product was confusing. I thought I was ordering the LCI kit, even double checked part numbers, they are the same. What I got was a kit by The Mobil Outfitters. Maybe they are part of LCI, I don’t now..... But, now I know why this kit is cheaper than the LCI kit, I performs the same function, but it’s a little crude. They supply grade 5 standard bolts where the LCI kit has the nice shoulder bolts. I guess I should have looked really hard at the picture, because the parts are displayed as you will get them.

Another big gripe for me was that the reinforced spring slot has its inside reinforcement plate slightly out of alignment with the main plate. Did not realize this until I forced a bolt through and ruined the fine threads on a bolt.

It gets the job done, just not as refined as the LCI kt.

by: Joe 05/25/2021

Great customer service from beginning to delivery.

by: Brent 10/01/2025

by: Tony 09/05/2026 One Year Later

With the shape of the hangers on our hitchhiker II, this wasn't a direct bolt on kit as it was designed. However, this was not an issue with a bit of planning, some select drill bits and a welder, I had the kit installed and axles aligned. This is a nice kit that offers a lot of fine adjustments.

Click to Enlarge

by: Scott 05/21/2026 One Year Later

After I had this installed my 5th wheel was level and pulls like a dream. I can take my hands off the steering wheel and my truck and 5th wheel do not move. Everything is aligned perfectly. I highly recommend this product for anyone that has trouble getting their new 2500 silverado to level out with their older 5th wheel. I gained almost 3 inches in height on my 5th wheel with this product.

by: MDG 01/06/2025

Easy install did in an afternoon.
Two problems (errors by me) .
1. MARK with BRIGHT PAINT MARKER the correct hole on the adjustable spacer including which side goes out. (would be nice if they were labeled) I reversed one and had to go back and fix it. Took about 15min to swap the position.
2. Be sure to predrill the self-tapping position screws. I did.- and even there I snapped the head off one.

Suggestion- Order replacement bolts that are ported for grease fittings, (20$ at your auto parts store) you will need two per axel.

When you are done you can check if your work is matching your desires by looking at the bolts and are they in the middle front or rear of the alignment channel at the bottom of the spacer

All told raised my 5th wheel 1”

Corrected my rear axle from under ½ inch error to 1/16 the out of parallel.

Click to Enlarge

by: Rick 02/10/2026

Looks like a really good product as far as the steel plates and being able to move the axles to run more parallel but not sure of a couple things. Is it good to move the axles when you have an equalizer that is constantly changing the axles with weight or road conditions? The other is in the instructions on line says it recommends "never fail" bushings to be used yet they are not included in the kit. That to me seems odd to send a kit without them yet recommends that they are to be used.

by: Ronald 04/05/2026

Good product, lifted FW so it now sits level on truck. Took some time to get alinement right. Ordered for tandem axle. Found out that you need to order triple axel for tandem. They need to fix this.

by: Michael 05/01/2023

The kit came exactly as described and works as indicated. The shipping was stunningly fast but that might have just been my location. Either way everything was delivered quickly and as described.
I am not sure if I did not read the part about it not working with my Dexter equalizers but I had to modify the kit considerably to get it to fit with my system. The equalizers rubbed on the plates and the plate with the holes extended to far down and rubbed on the rubber of the equalizer. I made it work for me. So far so good.

Click to Enlarge

by: Brian 09/01/2025

I’m not sure why if they have something in stock, it takes so long to get. Why wouldn’t you offer an expedited shipping option, the customer might need or want it in a timely manner. Horrible directions come with it. Even the Installation Details on their website is Horrible, directions and Inspections are two different things. Also, for a Tandem Axle lift kit, why would you not want to add something for the center hanger that holds your Equalizer, but that’s just my opinion. There Self Drilling Screws aren’t really designed to self tap through a trailer hanger, I’d recommend a pilot hole.

by: Thomas 05/25/2022 One Year Later

I was having a problem with the brakes on one wheel failing (magnet/actuator), even after replacing the entire brake assembly. Upon measuring the axle alignment to the hitch ball I discovered that the axles were out of alignment. This kit corrected the problem and I am no longer having brake problems, or excessive tire wear. The trailer tracks much better. I am very satisfied with the product. Installation on two axles took about 3-4 hours.

Thomas One Year Later

5/26/2023

After 2 years and 3300 miles, product is still working as expected. Completely solved the problem of tire wear, and excessive brake heating which lead to brake failure. Very happy with product.

by: Michael 03/26/2023 One Year Later

ETrailer is the best, but these things took TIME to figure out and get the axles aligned correctly! They did the job, lifting the RV up from the tires, and no more tires scraping the fender well on rough/bumpy roads. Have 2 people and a weekend available to get the kit installed correctly and aligned. Tires are running great with even wear. Thank you!

Michael One Year Later

3/27/2024

So, far even with chug holes and some rough interstate pavement, no more tire rubbing on the upper part of my self-made wheel wells. The Lift Kit has worked great!

by: Mark 05/20/2025

Works great especially with the Moryde X-member suspension reinforcement kit. It all bolted right on and seems better and more rigid than the stock non-lifted suspension. I couldn't be more happy.

by: Scott 04/02/2025 One Year Later

Purchased a year ago for a new duel axle enclosed trailer. From the factory, this trailer was out of true. I was replacing tires every couple thousand miles. This fixed it all. I would recommend.

by: David 07/07/2025

for my trailer is was not direct bolt. mount on trailer was angled and had to cut grove to fit.

by: Michael 07/12/2025 One Year Later

This product did just what we needed - it gave us an extra approx 2.5 inches of height on our trailer. It did take some time and effort to install - so plan on hours. It has worked perfectly though - no problems. I recommend.

by: Marcel 08/16/2023

Horrible product.. from the beginning I had problems with delivery. they changed the delivery date 3 times. when the product arrived at my house I was not present because I expected to use it before. and when using the product I realized that if it would not work. I took it in for installation and the mechanic tried several ways to find a safe position for it but . when I finished the installation and the weight of the trailer came down, the parts with the holes rotated and that brought me a loss of 2 tires. because they started to rotate crooked! In the end, completely dissatisfied with the product. and in the end I never knew what day I received the product and then I never knew when I would have the opportunity to return the product since I felt harmed by the situation! when calling the store they said my refund window closed 2 days ago! very strange. So far completely unsatisfied

Jenny N.

8/31/2023

It is very unusual for the holes to rotate once this is installed. The manufacturer will be in contact to discuss this with you.

by: Brian 09/04/2024

It CAN work with the Moryde CRE3000 suspension! For obvious reasons etrailer cannot and will not advise on making any modifications to this product and in doing so you are likely forfeiting any chance at returns or exchanges. I spent plenty of time researching best I could before pulling the trigger on this because I didn’t want to replace my perfectly good Moryde CRE3000 stabilizer unless I absolutely had to or the modifications would be too much work than it was worth. I’ll include as much information as I can.

Install of the product itself was super easy! Just unbolt the springs, attach correct track brackets and slip the springs right back in!

When it came to installing the equalizer shackle braces, modification IS REQUIRED! (Refer to photos). This requires an angle grinder for you to trim off a short section of the curled edges in order to clear the body of the CRE3000 stabilizer, while still maintaining some sort of edge to the plate to hold the adjustment block square, and cut the corners off of the adjustment plates to clear the tabs on the CRE3000.

I had wet bolts installed and the correct track kit will not host the wet bolts due to added plates needing longer bolts. I opted to replace only the 6 bolts I needed (part no. MR52HR), however they do make full wet bolt kits to work with the correct track (you would need the # MR58ZR for 2-1/4" and # MR98ZR for 3-1/8".)

I got everything installed and when it came time to check for axle alignment I found my axles were already perfectly square with towing direction of kingpin, and parallel with each other.

I can’t thank the customer service members of etrailer enough for putting up with a lot of my questions on other postings and helping me get as much info as I could. As they mentioned to me and it bears repeating, if you decide to modify this kit in any way, that’s a “you” decision and they can’t advise on that.

Trailer info: 19’ Dutchmen Voltage 3705 toy hauler. Tandem Lippert 7K axles, springs mounted on top of axle, Moryde CRE3000 equalizer with Moryde Suspension upgrade wet bolt kit.

Click to Enlarge

by: David 02/10/2023 One Year Later

This kit made a huge difference in the height of my 5th wheel, it is now level and also gives my rear leveling jack some extra clearance. Pretty easy to install, the first one will take a little bit of time, but the reat will go faster. I also installed the heavy duty shackles and the Road Armor Equalizers. This all made my RV ride so much better!

by: Kenneth 10/05/2025 One Year Later

excellent product and easy to install. I am very happy with this product

by: Steel 11/10/2024

The Triple Axle Kit costs less and includes three boxes instead of two, as with the tandem axle kit. However, the instructions could be clearer. I’d recommend choosing a triple axle set even if you’re working on a tandem axle, so you can adjust each hanger individually and maintain the correct spring angles. Otherwise, if you only install it on the center and rear hangers, you’ll need to adjust both the center and rear if you need to tweak the front right wheel, which can be tricky to get right. Alternatively, buying two single-axle kits could save you around $150 and simplify the setup.

Steel One Year Later

12/4/2025

Works great! No complaints!

by: Daniel 05/08/2023

Well unfortunately I was not able to use this product it was not applicable to my trailer but all I know is the service and the help that I got from the people that e trailer was awesome I will not shop anywhere else if I don't need to

Daniel One Year Later

5/9/2024

This product has helped us tremendously because of where we live. We are in mountainous country my driveway is hard to get into and this lift kit and the shock absorbing equalizer kit has made our trailer awesome. I would recommend it to everyone that has a bumper pull fifth wheel double or triple axle trailer you will love it

true

Show More Reviews

See what our Experts say about this RV Ride Control Trailer Suspension Parts

Do you have a question about this Trailer Suspension Part?

How to Lift 2025 Keystone Coleman 17B
Hi Justin; do the leaf springs run under your axle (underslung) or are they sitting on top of the axle (overslung)? If you have the underslung configuration you can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 you were looking at. This version is specifically designed for a 2-3/8" diameter axle so you will need to make sure that matches your axle. If you already have the leaf springs on top of your axle you can extend your hangers with two of the Correct Track...
view full answer...
What Lift Kit Fits 2018 Scamp Trailer With Lippert LC120 2,200 lb Axle
Hey Bob, thanks for reaching out. We may have a lift kit for you but I was not able to fine any references for the Lippert LC120 part number you provided, so I will need a bit more information on your axle. Specifically I will need to know if you axle is a torsion axle or a round tube leaf spring axle. If you have a torsion axle, you can use the Torflex Lift Kit # K71-723-01 with 7-3/4" between bolt holes on center or the # K71-707-01 if it is a #10 with 8" between bolt holes on center....
view full answer...
Parts Needed To Lift Zieman F-714 Flat Bed Trailer
Hey Terry! Do the leaf springs run under the axle on your Zieman F-714? Looking at pictures I believe they do but I'm not 100% sure. Assuming they do, you can use an axle flip kit to raise the height of your trailer. This will move the leaf springs to the top of the axle (overslung configuration). The correct kit depends on the diameter of your axle. If you have a 2-3/8" diameter axle you need the # K71-384-00 and for a 3" diameter axle # K71-385-00. This will raise your trailer by the...
view full answer...
What is Simplest Way to Add About 3 inches of Height to Boat Trailer
Hey Gary, so the best option would be to go with a Correct Track lift kit as that will give the trailer a lift of 2-5/8 inches. For that we have the part # LC87120 for a single axle or the part # RR23QX for a tandem axle.
view full answer...
Lift Kit Recommendation for Trailer to Give 2-1/4 inch Lift
We have the Correct Track Lift Kit part # LC87120 that would work great for you. This is a single axle lift kit that would give you a lift of 2-1/4 inches.
view full answer...
Availability of Lift Kit for Trailer that Already Has Over Under Kit Installed
Hey Al, we have a kit for that with the Correct Track lift kits like the part # LC87120 for a single axle trailer that can lift 1-1/4 inches. How many axles do you have and would a 1-1/4 inch or 2-1/4 inch lift help? We don't have any block kit lifts at this time.
view full answer...
Is There A Lift Kit For A Tandem Axle Trailer With Roadmaster Comfort Ride System Installed?
Hello Steve, thanks for reaching out. We do offer an axle lift kit that can be used on your 5th wheel with the Roadmaster Comfort Ride system installed. The Correct Track Trailer Alignment and Lift Kit # RR23QX is what I recommend. This will add 1-1/4" of lift. There is also an option for doing a 2-1/4" lift if needed. For that you will need the Tandem Axle kit # RR23QX, as well as an additional single axle kit # LC87120. That way you will have enough brackets to achieve the full 2-1/4"...
view full answer...
Recommended Lift kit for an Airsteam Globetrotter 27FB
Hey Jeff, it looks like your Airsteam Globetrotter 27FB has tandem 6k axles so a lift kit like the Torflex Lift Kit # K71-724-02 that you were looking at should work great. The only caveat is that this kit is designed specifically for #11 Torflex axles so you'd need to verify that first. You could also use the Correct Track Trailer Alignment and Lift Kit # RR23QX which will work with 3" wide x 3-3/4" tall hangers, or 3" wide x 5" tall hangers and leaf springs up to 2" wide. If want 2"...
view full answer...
Recommended Lift Kit for a Single Axle Trailer
Hey Krystian. There are three options to lift your trailer depending on if your axle sits above or below the leaf springs or if you have torsion axles. I do not have a database that shows me what parts on are your Jayco trailer. If you have a torsion axle where the suspension and axle are all one piece I'll need you to send me a picture of the axle tag or take a measurement of the mounting bolts center to center so I can find you the correct lifting block. I have attached a diagram below...
view full answer...
Trailer Lift Kit for a 2005 Forest River Shamrock Hybrid 17
The correct lift kit is going to depend on what axle you have, which is not a fitguided item. We have a couple lift kits with 3.5" of lift. The Axle Riser Kit - Single Square Torsion Axle # LC382741 which is for square 3,500 lb. axles or the Axle Riser Kit - Single Diamond Torsion Axle # LC270682 which is for Diamond 3,500 lb. axles. There are also over under kits, which basically flip your leaf springs to the top of your axle which lifts the trailer. There are two options here as well....
view full answer...
Lift Kit Solution for KZ Sportsman Classic 190
Hey AB, to actually gain ground clearance you will need a lift installed on your KZ Sportsman Classic 190 which we have that with the Correct Track lift kit part # LC87120 which can give you a lift of 2-1/4 inches. The other components you mentioned are solid too but they don't change the height of your trailer.
view full answer...
Looking For Lift Kit For 5x8 Carry On Trailer
Hello Andres, thanks for reaching out. Yes, we should have a lift kit for that but ill need you to check and confirm exactly what axle is on your trailer, since there isn't a way for me to look that up online. Depending on what you have, there are a few potential options. If your axle is a 2-3/8" diameter round tube and has the leaf spring back positioned beneath the axle, you can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00. This lets you move the spring pack...
view full answer...
How to Stop Scraping the Driveway and Bottoming out w/ a Tandem Axle Trailer
Congrats on the new 5th wheel trailer. You can definitely install a pair of weld on skid wheels on the back bottom corners of your trailer, or frame. I have listed a couple of options below: Ultra-Fab Steel Mini-Roller for Trailers and RVs - Weld On - 1-1/2" Wide x 2-1/2" Tall item # UF48-979022 Ultra-Fab Steel Jumbo Roller for Trailers and RVs - Weld On - 2-1/2" Wide x 3" Tall item # UF48-979023 As far as a lift kit goes. It looks like the axles on your 2025 Forest River Salem Hemishere...
view full answer...
How to Achieve 2-1/4" Lift On Correct Track for Triple Axle
Hi John; this has been a pretty big source of confusion and frustration for us. The Correct Track Trailer Alignment and Lift Kit - Triple Axle # RR55QX comes with six sets of brackets. You need to extend all of the hangers for the full 2-1/4" lift, and there will be 8 hangers on your triple axle trailer. Adding the single axle kit # LC87120 will give you enough to extend all of the hangers for the full lift. My team has been trying to get this changed for quite a while, I apologize for...
view full answer...
Solution for Tent Trailer to Help with Ground Clearance Pulling in Driveway
Hey Craig, what about a lift kit for your trailer to gain additional ground clearance? As long as your trailer has leaf spring suspension the kit you'd need is the part # LC87120 which will give it a lift of 2-1//4 inches which would make a huge difference in ground clearance.
view full answer...
Lift Kit Solution for 2,000 lb Trailer Axle
Hey Josh, if you have 2k axles the over under kit part # K71-384-00 would not work as this was designed for a larger diameter trailer axle. But we can help. To create a kit for that axle diameter size you'd need the part # APUBR-10 for the u-bolts and then part # TR22175 for the spring seat. Then to add an additional 1-1/4 inch of lift you'd need the Correct Track part # LC87120. That should put you right at the 4 inches of lift. I would not recommend trying to go with longer shackles...
view full answer...
Lift Kit for a 2015 Riverside White Water Retro 155XL
Hey Mike, thanks for reaching out! I know your 2015 Riverside White Water Retro 155XL has a single axle so if it's a standard axle then you can either use the Correct Track Trailer Alignment and Lift Kit # LC87120 or you can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 if your leaf spring currently sits under your axle. If you have a torsion axle then I'll need to know axle information which can be found on a sticker towards the center of the axle.
view full answer...
Availability Of Correct Track Trailer Alignment and Lift Kit
Hello Brian, thanks for reaching out. As far as I know, the Correct Track kit has not been discontinued. We still carry them and stock them here. As of right now we have not heard anything from the vendor that would indicate they are being discontinued. The Correct Track is made by a company called RV Ride Control, so that might be why you didn't see it on the Lippert site. We have the single, tandem and triple axle kits: - Correct Track Trailer Alignment and Lift Kit - Single Axle # LC87120 -...
view full answer...
How to Lift 2023 Cynergy Single Axle Cargo Trailer 2" - 3"
Hey Robert, thanks for reaching out! To get a 2" lift on your cargo trailer you need the Correct Track Trailer Alignment and Lift Kit # LC87120 which is able to lift your trailer 1-1/4" or 2-1/4" depending on what settings you choose. Aside from this there are a few other ways you can increase the height like by swapping out your leaf springs for taller ones (much tall ones) or having your hangers cut off and welding taller ones instead. Let me know if you have any other questions!
view full answer...
Adding 2" Of Lift To A Keystone Bullet 29BHSWE
Hi James! Adding 2" of lift to you Keystone Bullet 29BHSWE is something we can help with. And actually, the Correct Track Trailer Alignment and Lift Kit - Triple Axle # RR55QX is what I recommend going with. This technically says it's for a triple axle trailer/camper, but to get the full 2-1/4" lift it can offer, the brackets do need to be installed on all the hangers (including the center equalizer one). The Tandem Axle Kit # RR23QX doesn't include brackets for the center hanger and...
view full answer...
Suspension Kit for 2015 White Water Retro 155XL
Hi Michael; when you say suspension kit do you mean a lift kit like the Correct Track Trailer Alignment and Lift Kit # LC87120 you looked at? Assuming you have a leaf spring suspension this is the only option available for a lift kit. The only other way to lift the trailer is to cut off the existing hangers and weld on taller ones. If you're looking for something else let me know in the comments below.
view full answer...
Availability Of Over-Under Kit Or Lift Kit For 2,200 lb Axle
Hello Tyler, thanks for reaching out. The 2,200 lb axles are generally a 1-3/4" tube diameter and I am sorry to say we do not offer an over-under kit for this. At this time we only offer kits for 2-3/8" diameter # K71-384-00 and 3" diameter # K71-385-00 axles. We do offer a lift kit that can be used with really any double eye leaf spring suspension, the Correct Track Trailer Alignment and Lift Kit # LC87120. This provides 1-1/4" of lift. Or if you get two kits, it can do 2-1/4" of lift....
view full answer...
Availability Of Over-Under Kit Or Lift Kit For Dexter 2,200 lb Axle
Hello Tyler, thanks for reaching out. The 2,200 lb axles are generally a 1-3/4" tube diameter and I am sorry to say we do not offer an over-under kit for this. At this time we only offer kits for 2-3/8" diameter # K71-384-00 and 3" diameter # K71-385-00 axles. We do offer a lift kit that can be used with really any double eye leaf spring suspension, the Correct Track Trailer Alignment and Lift Kit # LC87120. This provides 1-1/4" of lift. Or if you get two kits, it can do 2-1/4" of lift.
view full answer...
Can You Install Longer Shackle Straps on Single Axle Trailer for More Lift
I do have an option for you but changing the shackle strap length will change the whole suspension geometry so that's not recommended unless changing other components such as the leaf springs. Furthermore, 3-1/8" is the longest length used on most trailers. I instead recommend using a leaf springer hanger extension kit like the Correct Track Trailer Alignment and Lift Kit part # LC87120 which will provide a lift of 1-1/4" or 2-1/4" as well as correct a misaligned trailer axle if present.
view full answer...

< Previous

12 3. . .5

Next >

Do you have a question about this Trailer Suspension Part?

Info for this part was:

Video Edited:

Zack K

Installed by:

Jeff D

Installed by:

Kathleen M

Expert Research:

Jameson C

Written by:

Chelsea B

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Mike S

Updated by:

Jerry B

Updated by:

Manda E

Updated by:

Carrie F

Updated by:

Ryan F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.