Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Heidi. To use a Curt Echo Wireless Brake Controller item #C51180 on a tow vehicle with only a 4-way connector, you'll need the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation item #ETBC7L. The Curt Echo item #C51180 requires a…
view full answer...The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…
view full answer...The best option for wireless brake controllers is the Curt Echo #C51180. It is the easiest to plug in and go when you need to use a brake controller with your trailer. Once you have a 7-way connector installed in your vehicle, all you need is to…
view full answer...Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…
view full answer...The particular parts you need to install a fully-functioning 7-Way on your 2019 Toyota Highlander Hybrid will depend on what exactly it's already equipped with. Either way you will need to start by adding a 4-Way connector harness. If your…
view full answer...If your plan was to install a brake controller you'd have to also run the black wire of the 7-Way Adapter part #30717 to the to the positive post of your vehicle battery as well as the ground you mentioned. The Curt Echo part #C51180 that you…
view full answer...It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…
view full answer...Hey Don, thanks for reaching out! I checked out the owner's manual for your 2025 Traverse and according to page 258 it says "if equipped" and there are blunt cut wires that need to be spliced into. This means you'll need to hardwire…
view full answer...To use the Curt Echo Wireless Trailer Brake Controller #C51180 your vehicle only needs 12 volt, ground, and turn signals connected to its 7-way socket. What this means is you do not need the brake signal from the 7-way. For example, if you used a…
view full answer...If you have the factory tow package and have a converter under the dash of your 2017 Highlander the wiring harness I recommend is the Curt T-Connector Vehicle Wiring Harness, part #56042. This simply plugs into the factory tow package wiring harness…
view full answer...Yes, the Demco Commander tow bar #DM9511012 will work to flat tow your 1999 Jeep Wrangler. You need several other items to complete your towing setup though. The first thing you will need is a base plate kit. If you have a double tube bumper you want…
view full answer...Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…
view full answer...