Hello Richard, Congratulations on the KZ Confluence 18RB! That is a really nice camper, and I like that KZ packed quite a bit into an 18-foot floorplan while still giving you a slide for some extra room inside. Yes, installing the etrailer RV…
Hi LaRue! The etrailer RV Slide-Out Topper #e67QV does include the awning rail track. This is everything you need for a complete slide-out topper installation. If you already have Solera mounting brackets installed from the factory, you will also…
Hey Jerry, thanks for reaching out. The Atlas IV Hydraulic Trailer Jack #ST23FR is a single-acting hydraulic jack, so hydraulic pressure is only used to extend the cylinder. Once the trailer is coupled and the tongue weight is off the jack, the…
Hi Chris, Sorry to hear that your window is slipping down in your entry door. From what you described, it sounds like you need something like the JR Products Deluxe Window Frame for RV Entry Doors part #37211021. It is a black window frame…
Torklift HiddenPower battery mount and box #TLA7728 will not fit your 2011 Ford E-450 but we do have a model that is a possible fit. Take a look at #TLA7729. This one is designed for the E-250/350. They do not list it as a fit for the E-450 so you…
Hey Kyle! That is correct. The Coleman-Mach Mach-C Everest has variable-speed cooling and an inverter-driven compressor. However, the Mach-C Everest uses a traditional wall thermostat instead of a remote control. It also works with both ducted and…
Hey Bryce, thanks for reaching out, and good question. The Mount-n-Lock Heavy-Haul’r Heavy Duty 4-inch #MNT43VR is basically the same 4" x 4" bumper as the standard 4.0, but with a stronger mounting setup. You’re not getting a bigger or…
The way to ensure that a new hub will fit a spindle is to match up the bearing set used in the original and replacement hubs. This is best done by matching part numbers. The linked diagram shows the usual placement of bearing part numbers. If you…
A spacer or hub-centric ring is sometimes used on passenger vehicles, but our resident wheel and tire guru tells me that they aren't needed for use on trailers, due to the weight load a trailer wheel will be under. If you feel you need them, you…
Hey Nick, welcome back! The High Pointe Over the Range RV Microwave #HP74ZR will work as a replacement for your EM044K9E. They share the same dimensions so it will fit the existing space without any issues. It also has a higher capacity of 1.9 cu ft…
Hello Jay, I’m curious what panel you’re planning to use. How many panels will you be running, and what is the total wattage? I want to make sure the controller I recommended is properly sized for your setup. Right now, your camper has the Go Power…
Hey Mike, welcome back! The 2-1/2" shanks have the same channel size as the 2" shank for the Andersen Weight Distribution Hitch so they all work for the same system. We didn't have the 2-1/2" shanks available separately so I went…
Filters
