Search: Battery   >  

Hey Howard, in general people don't balance trailer wheels and tires as it doesn't seem to make enough of a difference for it to be worth it but the tire of the Westlake ST205/75R15 Radial Tire w 15" Eagle…

Hey John, yes the Everchill #EV27FR would fit in a 25 inch deep cabinet like you mentioned. This would be a really solid option to replace your Norcold so I think you should go for it. This is also our best fitting option for replacing what you…

Hi Walter, For the Deka Battery Isolator #DW08770 you can go with 8 gauge wire. Deka actually makes an installation kit with this wire, the Deka Battery Isolator Installation Kit for Standard Alternators #DW08769.

Since you've already got a 4 pole on your trailer, you'd just need to add a 7-way with #ETBC7 so that you can run a charge line using #10-1-1 from the accessory circuit to your battery. This circuit is located at the…

The Go Power Lithium RV Battery #34282738 has a 100-amp hour capacity. You will need to compare this to the current flooded batteries you have installed to determine what increase in capacity will be. Whatever the increase in amp hours is will be…

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate…

A diode like the part #RM-690 is a great idea but the only issue is that is has a max load of 85 amps. A standard 5,000 lb winch, like the ComeUp DV-5000si #CU645010, will greatly exceed the 85 amp rating of the diode so it would be useless. What…

Hey Craig, It sounds like you are asking if you can use the Progressive Dynamics converter #PD69RR to charge a battery that has a 3 panel solar panel setup also charging it. The answer to that is yes you can.

You can put a maintenance charge on your trailer battery with the 12 volt accessory circuit of the 7-way. The 1:00 position of your 7-way carries this circuit. You would just need to run a length of 10 gauge wire like part #10-1-1 (sold by the…

If I'm understanding you correctly the starter solenoid #PK5231201 is not the solution to your problem. Based on what you have described, it sounds like both the breakaway battery and winch battery are hooked to the 12V power coming from…

For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…

You can use the Timken Grease and Oil Seal #TMK98ZR in place of the Grease Seal #GS-2250DL. While they are not exactly the same seal construction it is still a double lip design and the dimensions are the same so they are going to fit correctly.