Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…
The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K that you referenced.
Hey Ted, thanks for reaching out. I went out to our warehouse and measured the Dexter Light Box Guard #DX99VC. The oval cutout is indeed 6-1/2" long x 2-1/2" tall. The 2" side light is supposed to be just a clearance light for…
Hey Mike, The bracket on RV Designer Rectangular Incandescent License Light w/ Bracket #RD68RR is made of a heavy-duty plastic and will withstand strong weather conditions, so you won't have to worry about it being brittle or not rated for your…
The manufacturer of a trailer can sometimes confirm specific parts using the trailer's VIN but the best way to know what replacement bearings and seals you need is to pull one of the hubs and to remove those parts. Then it is usually easy to find…
If you are looking for the center section of the bracket that is in the picture you submitted of the #MCL67ARB that you referenced the correct part number you need is the #A65P that you referenced.
Hey, Chris. Happy to help out! There is an option for you, but it won’t be a simple swap since we don’t have an axle with a 77.5" spring center and a 93.5" hub face. The closest option we have is the Dexter Trailer Axle Beam #7359765. This…
Hello Douglas, Thanks for writing in, and thank you for your order! I am sorry to report that the manufacturer does not have a weld pattern or installation instructions available for the Sleeve-Lock A-Frame Trailer Coupler #CA-5296-B. I know that…
Hey Brandon, the horizontal distance between the mounting holes of the etrailer jack part #e35YV that you referenced is 3-1/2 inches. The horizontal mounting holes are separated by 1 inch. Are you trying to match this jack to an existing mount?
Hey Eddie, the Curt hitch part #C22RJ and the Trailermate part #TMT29FR are both very similar in design and capacity. I really like the Curt hitches and recommend them whenever available but Trailer Mate isn't bad either. If you are wanting the…
The Hopkins 6 Pole to 7 Pole Adapter, #47435, does have a pin for the brake output for a brake controller. This adapter will work for your set up as long as the center pin of the 6-way plug on your RV is for 12v power and the pin in the 10 o clock…
On each individual electric brake magnet the amperage draw would be 3.0 to 3.2 max amps at 12 to 13 volts on 7-inch brake magnets and 3.2 to 4.0 max amps at 12 to 13 volts on 10 and 12-inch brake magnets. The max amperage draw for the brake magnets…
Filters
