Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you just need a clean, easy way to light up your license plate, this small round light makes the job simple. At 1-1/2" in diameter and 2" long, it snaps right into a 1-1/4" diameter mounting hole—no brackets or extra hardware needed. The single-wire design grounds through the mounting surface, keeping wiring tidy and installation quick.
This light uses a standard #67 single-filament incandescent bulb that’s easy to find and quick to swap out. Replacement is straightforward—just pry the bulb holder away from the housing with a small screwdriver. If you ever prefer a different bulb type or need to adapt for a 24V setup, it can even accept a 1251 bulb in the same housing.
Durability matters, especially for exterior lighting. The chrome-plated brass construction holds up well against corrosion and wear from road debris and weather. The clear lens stays tight over the bulb, keeping the light focused on your plate and maintaining that clean look over time.
Designed specifically as a license plate light, this unit provides bright, even illumination that meets visibility needs at 12V DC. For full DOT compliance on larger plates, you’ll need two of these lights—this one handles one side perfectly, keeping your setup neat and effective.
Drawing just 0.4 amps at 12.8V, this incandescent stays efficient while delivering consistent brightness. It runs cool, won’t overload your circuit, and works smoothly with standard trailer wiring systems—all backed by a 3-year warranty for peace of mind.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Easy to install and brighter than the original lights.
Everything I needed to update my trailer was here. As I was preparing the trailer to put the new parts on, the mail carrier arrived and put them in my hands. All the parts were a direct replacement.
Worked great, easy to wire up
Perfect replacement/fit... works great; easy install....
This is exactly what I was looking for and could not find for my 1995 F250. And, as always, excellent customer service and fast shipping. Great company. Thanks.
Great price and quality. Should I have a complaint, I believe the shipping and handling charges a bit high. Good and fast service. I will purcase from etrailer in the future. Bob T.
Lights installed in holes easily and fit well. Wire leads could have been a little longer for my application.
Dale E.
7/23/2018
Thanks for checking up. The lights were installed in my bumper on an 87 GMC and works great.
Ordered my parts and within 2 days received them. Great job!
Abel
1/29/2025
All is well with the license plate light. Easy to install and worked as per design. Thanks
great product and even greater price from etrailer.com
Mike L.
7/31/2023
great product
Still holding up and illuminating my license plate one year later!
Charles
11/9/2023
Still holding up and illuminating my license plate after a year.
It's exactly what I needed. I have a 1988 Dodge Dakota pickup that needed these to fit into the bumper for the license plate lights. They arrived quickly in good order and I've already installed them.
Works great!
I received the license plate lights within the noted delivery time. They are a good quality. I had to breakoff one of the finger tabs to fit the bumper tab. Other than that installation went fast. Light is much brighter than the old ones. Good product, good price.
Ordered two license plate lights which were receive promptly. One light had a short and was replaced quickly by eTrailer. All good now. Overall wonderful experience and will shop at eTrailer again.
I have a flat bed on my truck and it uses trailer lights in it. When I looked for replacements all the stores wanted $10 to $30 a peace!!! Etrailer saved me almost $100 over going to may local store. I ordered it on sunday night. I had 2 personal emails telling me my order was ready and being shipped. ON SUNDAY NIGHT!!! I had my order by Wednesday with a follow up email telling me my package was waiting for me at home. My only complaint is why other online stores can provide this service. etrailer, I will be ordering again. Thank You
Great price , quick shipping , good communication
Thomas H.
11/4/2018
Works like it should
Easy replacement for the rusty original lights. Popped out the lights, cleaned the rust on the inside of the mounting hole, slathered dielectric grease on the outside of the light, made the electrical connection and pushed in the light. Not especially bright, but legal. May go with led's next time if they need to be replaced.
License plate lights were exactly as described. Better quality then original. Easily connected to existing harness using fitting I picked up at local store. Took a little longer receiving them then anticipated. But my USPS isn't the quickest. Tracking had the item locally for 2 days. I do recommend the product, though.
I used this trailer light to replace the tag light on my 94 silverado pickup and it works perfect.
Daniel
8/27/2021
After a year the lights are still working, they have proven to be a quality product
Lights fit perfectly to replace some I broke . They also were a direct plug in to my wiring harness .
John K.
9/16/2020
In a word great
Having difficulty finding OEM license plate lense replacements for my 1995 f150, I went outside the box and found etrailer.com was the answer. Thank you for the quality parts that were exactly as listed. Also, I was impressed with the follow up with tracking info and delivery confirmation. You can be sure that I will tell all of my trailer and RV friends about it.
Derrell
6/20/2022
Still working great, I nomad fulltime pulling my TT. These lights have stood up to the challenge!
Just what I needed
They are great and wired right in worked perfectly.
The front steps were tough to navigate in the dark, so I installed six low voltage lights to light the way.
I wanted the lights to be unobtrusive and fit within the recesses of the existing stone, so I decided to fabricate them using 12v license plate lights.
It turned out to be an inexpensive solution that worked well.
Output is about 5W, which isn't a lot but it's perfect for steps. Now it's no longer an adventure going down the stairs at night!
The right product delivered on time. Will shop here again when arts for my trailer are needed.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Alan
2/5/2018
They worked perfect and I sold the truck that I mounted them in.