Pre-Greased Hub Replacement for 8-248 Dexter 3,500 lb Hub with 5 on 5-1/2 Bolt Pattern

Updated 05/06/2020 | Published 05/04/2020

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2

(889)

$89.30

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1835)

$105.75

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1284)

$91.20

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased

(1052)

$59.43

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

(1479)

$55.31

Replacement Trailer Hub Bearing - L44649

(2138)

$22.32

Replacement Trailer Hub Bearing - L68149

(2138)

$17.57

Question:

I have a TWF trailer with a dexter hubs 8-248 and 5 on 4 1/2 spacing with 14 inch wheels I want to replace the hubs. Do you have hub assemblies that are greased an ready to install

asked by: Joe P

Expert Reply:

We have exactly what you need to replace your Dexter 8-248 hubs, which use # L68149 for their inner bearing and # L44649 for their outer bearing and fit Dexter 3,500 lb axles.

If you need just the idler hub, we have the Pre-Greased Trailer Idler Hub Assembly - 5 on 4-1/2 # AKIHUB-545-35-EZ-K for EZ-Lube axles, or # AKIHUB-545-35-K for standard axles.

If you need the hub/drum assembly, we have the Pre-Greased Trailer Hub and Drum Assembly - 5 on 4-1/2 # AKHD-545-35-EZ-K for EZ-Lube axles, or # AKHD-545-35-K for standard axles.