Replacement Hub and Bearings for Fish Right River Master Jet Boat Trailer With Dexter 8-248 Hubs
Updated 05/03/2024 | Published 05/01/2024 >
Products Featured in This Question
Question:
I have a 22-24ft dual axle fish right river master jet boat. Im in search of the hub assemble with bearings and such. Unfortunately I can’t recover the numbers off the race or bearings but it is a 15” wheel 5 -4 1/2. It’s a Dexter 8-248. I believe it also says 8154 then a single 4 on the next bolt space. Can you help?
asked by: Corey L
Helpful Expert Reply:
Thanks to the information and picture you provided I can definitely help. The replacement for your Dexter 8-248 is the # 84545BX. If you want a pre-greased option you can use the # 84545UC1-EZ. If you don't care about it being from Dexter the # AKIHUB-545-35-G-K you were looking at will also work. These all fit a standard 3,500 lb axle with # L68149 inner and # L44649 outer bearings.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Review of the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Determining Which Hubs and Bearings Fit A 2003 Tracker Trailstar Trailer
- Search Results: timken l68149
- Search Results: timken l44649
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Zinc
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 3,500-lb Axles
- Video: Let’s Check Out the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: What to Know About the Dexter Disc Brake Kit
- Q&A: Replacement Dexter Trailer Hub with 8-248 Marking
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Dexter Hub Replacement for Hub Marked 8-248
- Q&A: How to Determine the Correct Hub Assembly for a EZ Loader Boat Trailer Tapered Spindle
- Q&A: Replacement Dexter 3,500 lb Axle Trailer Hub with 5 on 4-1/2 inch Bolt Pattern
- Search Results: bk2 100 bearing kit
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-K
- Q&A: How To Determine Replacement Hubs And Brakes For Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Search Results: trailer hubs and drums
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Titan Trailer Brakes T4829900 Review
- Search Results: brake line kits
- Search Results: 3500 lbs axle trailer brakes
- Search Results: disc brakes brake actuator
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs




Corey L.
5/2/2024
Thank you. Which bearing buddy would fit with these cap sizes