Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-2-G-EZ-2K Video

In order to determine if hub assembly 8-258-50UC1-EZ will work for you, first know that this assembly is for EZ Lube spindles that require a grease seal with a 1-1/2" inner diameter such as #RG06-020. You are also going to want to remove the hub…

Thanks for getting me all the info needed to pick out a hub! Based on what you listed the correct hub you need for a replacement is the part #84545BX. This uses the same bearings as what you have and has a matching bolt pattern.

Thanks for all of the info on your spindle. The Dexter hub part #8-258-50UC1-EZ that you referenced is the correct fit for your spindle. The bearings match the 1.06 inch diameter and the seal diameter of 1.5 inch matches as well. We do not have a…

Any given tire size will fit a range of wheel widths. For a 175/80-13 trailer tire it will fit a 13 inch wheel that is 4-1/2, 5, or 5-1/2 inches wide. Wheel #AM20222DX is a 13 x 4-1/2 inch wheel so a 175/80-13 tire will fit on it. This wheel has a 4…

The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…

Based on your inner and outer bearing being the L44649 bearing, the Trailer Hub Assembly #8-258-50UC1-EZ will work well for you. You will want to confirm that your existing hubs have a 5 on 4-1/2 inch wheel bolt pattern. I was unable to find any…

The Trailer Hub Assembly #8-258-50UC1-EZ does appear to be the correct replacement hub assembly for your 2007 Tracker Trailstar Trailer. To confirm this you will want to remove the entire hub assembly and ensure the spindle is a straight spindle and…

Overpacking the trailer hub with grease is the number one reason for grease seal failure. For a boat trailer I would recommend re-packing the hubs by hand with grease once per season and you'd be fine. I don't like recommending people use…

To find the right replacement hub for your Trailstar trailer you will need to identify your current bearings and also know your bolt pattern. The bearings may have the part number stamped in the side which can be used to identify them. If the part…

The Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized #AKIHUB-545-2-G-EZ-2K and the Trailer Hub Assembly - 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - 8" - 12" Wheels - Galvanized #8-259-50UC1-EZ are interchangible…

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, #L44649. Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to confirm…

From what I could find out about the Super Lube Spindles, they will be much the same as the Dexter EZ-Lube style spindles, like the #TRU74FR. This will include a zerk/grease fitting on the end that allows a grease gun to attach to. With that being…