Trailer Hub Replacement for Dexter 8-248 With 5 on 5 inch Bolt Pattern
Updated 09/30/2019 | Published 09/28/2019
Products Featured in This Question
Question:
I have a 1984 16foot utility trailer. The hub has markings on it that read Dexter 8-248 and the bolts are measuring 2 15/16. Is this a 5 on 5 bolt hole pattern?
asked by: Chuck
Expert Reply:
Make sure you are measuring from wheel stud center to wheel stud center when trying to determine the bolt pattern. The measurement you mentioned doesn't really match but it's very close to 3 inch which would be 5 on 5 inch. The correct idler hub to replace your Dexter 8-248 and has a 5 on 5 inch bolt pattern is # AKIHUB-550-35-K.
I attached a help article on determining wheel bolt patterns for you to check out as well.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: k08~248~1g
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub and Bearings for Fish Right River Master Jet Boat Trailer With Dexter 8-248 Hubs
- Search Results: dexter hub 8 248
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub For Hay Rake with Dexter 8-248 Hub
- Q&A: Replacement Idler Hub Assembly for a Dexter Axle 08-248 5 on 4-1/2" Hub
- Q&A: What Spindle Does the Dexter 8-248-05 Hub Fit
- Q&A: Replacement Idler Trailer Hub Assembly For Dexter 8-248 Hub
- Q&A: Is There a Replacement Seal for 10-40 with Double Lip?
- Q&A: Replacement Bearing and Seal Kit for a Dexter 8-248 Idler Hub