See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
  Hello Mike. It sounds like you are wanting to add electric brakes to your boat trailer that currently has no brakes. This is possible, but you will first need to make sure that your axle is equipped with a brake flange at the base of the spindle. The brake flange is necessary for adding brakes. If you do have a brake flange, you will next need to determine your bearing sizes. Electric brakes will require new hubs and drum assemblies, and we need to be sure that there is a drum available...
  view full answer...
• Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
  You are correct that is a 3,500 lb axle. If you want a bearing kit the # BK2-100 you looked at is the right one. This comes with a # L44649 outer and # L68149 inner bearing along with a # 58846 (10-19) grease seal. If you want a replacement idler hub you can use the # AKIHUB-655-35-K or for a hub and drum assembly the # AKHD-655-35-K. Both of these have a 6 on 5-1/2 bolt pattern.
  view full answer...
• Replacement Disc Brake Rotor/Hub For a 1990 Ranger Trail Boat Trailer
  The Dexter 10" Hub-and-Rotor Assembly # K08-435-05 is designed to fit a 3,500LB trailer axle with the Inner Bearing # L68149, Outer Bearing # L44649 and Grease Seal # RG06-050. To confirm if this is what matches the axle on your 1990 Ranger Trail Boat Trailer, you will need to inspect your current hub for the bearing and seal information. If you are unable to find the information stamped on the bearings and seals you can measure your spindle with a Digital Caliper # PTW80157. Once you have...
  view full answer...
  
• Replacement Brake Drum Hub Assembly For Dexter D44 4,400LB Axle
  Your Dexter D44 Axle number 635096 uses the Trailer Hub and Drum Assembly # 8-407-5UC3-EZ that comes preloaded with the Races # LM67010 and # L68111. It does include the Bearings # L68149 and # LM67048, Grease Seal # 58846, Grease Cap # 21-42-1 and lug nuts. The Brake Assemblies # K23-462-463-00 that came with your axle can be upgraded to the Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 to reduce the maintenance as well as improve braking and extend the life of your brake...
  view full answer...
  
• Availability of Bearing Kit for Dexter 4,400 lb Trailer Axle
  We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings # L68149 and # LM67048 Races # L68111 and # LM67010 Grease Seals # RG06-050
  view full answer...
• Replacement Hub Components for Hub 9606020
  While the # L68149 most likely corresponds to the inner bearing number of your hubs. If this is the case, you have either a 3.5k or a 4.4k axle. In order to know absolutely sure, you need to know the corresponding outer bearing number or the inner and outer diameter of the grease seal. You most likely need to wipe away the grease in order to reveal the outer bearing number. In order to accomplish this, I recommend using calipers like the 4" Carbon Fiber Digital Caliper # PTW80157. I...
  view full answer...
  
• Bearing Kit for Lippert 4,400 lb Trailer Axle
  For a Lippert 4,400 lb trailer axle the correct bearing kit is the part # BK2-100 which includes inner bearing # L68149, inner race # L68111, outer bearing # L44649, outer race # L44610, grease seal # 58846, a cotter pin and a tang washer.
  view full answer...
• Wheel Bearings and Grease Seal for 2023 Keystone Cougar 23MLE
  Hi Dale, it looks like you have the resurrected 4,400 lb hubs like # DX53WR with the # L68149 inner and outer bearing. These had been phased out but are making a comeback. You also need # L68111 for the races and 10-19 grease seals # RG06-050.
  view full answer...
• Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
  The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing # L68149 and an outer bearing # L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com # AKIHUB-545-35-G-EZ-K. This is galvanized and will be the best option available for your trailer. This also includes both the inner and outer bearings, the grease seal, the grease cap, and the lug nuts.
  view full answer...
• Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
  Hey Kevin welcome back! The Hub Bearing Kit item # BK2-100 is most likely what you'll need. The item # L68111 race is what's used on the item # L68149 bearing found on 3,500 lbs axles. Without that second bearing part number or a measurement, I can't 100% confirm. A quick way to confirm item # BK2-100 is what you'll need is to measure your spindle with a digital caliper like item # PTW80157 and measure the spots marked C and D on the diagram below. C will be 1.378" and D will be 1.063"...
  view full answer...
• Timbren Axle-Less Suspension System Compatibility with Aluminum I-Beam Trailer Frame
  The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion, but a thin rubber pad would drastically increase this safety. Zinc plated hardware will work well with...
  view full answer...
  
• Is there a Replacement O-Ring that Sits at the Back of the Spindle Before the Backing Plate?
  Hello Jeff, Thank you for the picture, they are always most helpful. That is an interesting set-up. It looks like it might be an old o-ring from a Dexter Vault like the Dexter Vault Hybrid Lubrication System for 2,500-lb to 3,500-lb Trailer Buddy Axles # DX52UR, do you know if that was previously on there? What kind of trailer is this on? I cannot see the full Spindle in the picture you sent, is it a straight spindle with both L44649? If so you could order Complete Bearing Kit with L44649...
  view full answer...
• Pre-Greased Replacement 5-on-5 Hub for 3500-lb Dexter Axle
  You can confirm the weight rating of your Dexter axle by removing one hub and pulling its bearings. The included photo shows how part numbers usually appear on bearings. The specific bearings used will tell you the axle's weight rating. Just refer to the linked article that lists the bearings commonly used for various axle weight ratings. A new hub must use the same bearings as the original hub in order to fit on your spindles. A 3500-lb axle commonly uses bearings # L68149 and # L44649...
  view full answer...
  
• Replacement Grease Seal for 4400-lb Lippert Trailer Axle
  For a 4400-lb Lippert axle the most popular grease seal is part # 58846. This is a double-lip grease seal with an inside diameter of 1.719-inches and an outside diameter of 2.565-inches. This seal is often used along with inner wheel bearing # L68149 and outer bearing # LM67048.
  view full answer...
• How To Find Correct Replacement Bearings and Hub for Outback Trailer with AL-KO Axles
  I have a few options for you to help with identifying the bearings on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100 or the Easy Grease Trailer Hub and Drum Assembly...
  view full answer...
• Replacement Hub Assembly for T.D.E. 11033
  From what I was able to find out from my research, the Tie Down Engineering 11033 hub has a 5 on 4-1/2" bolt pattern and is designed for 3500-lb axles. Replacement hubs that have these specs typically use a # L68149 inner bearing and # L44649 outer bearing, as well as inner race # L68111 , outer race # L44610 and grease seals with inner diameter of 1.719" and outer diameter of 2.565". You'll want to verify that your current hubs have these bearings, races and seals to ensure that a replacement...
  view full answer...
  
• Need Bearing Kit For Lippert 3,500 lb Axle On 2021 Forest River Grey Wolf 23DBH
  Hello, and thanks for providing all of that information for your axle. I had my contact at Lippert run the item number and serial number. Your axle is a standard 3,500 lb axle and it used the standard bearing and seal sizing. Our bearing kit # BK2-100 is exactly what you will need to repack everything. This comes with both bearings, races, seal, tang washer and cotter pin. Use one kit per hub. I have included all of the bearing info for your trailer below. Let me know if you need anything...
  view full answer...
• 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
  The Bearing Kit # BK2-100 will contain the new bearings, races, grease seal, tang washer and cotter pin for replacing the bearings on your 2005 Ranger Trail Boat Trailer. The Inner Bearing # L68149, Inner Race # L68111, Outer Bearing # L44649 and Outer Race # L44610 can also be purchased separately and used with the Kodiak XL ProLube Kit # XLPROLUBE1980KIT if you are converting to an oil bath hub. If you already have an oil bath setup the Oil Seal # XLPROLUBE1980SEAL will be the correct...
  view full answer...
• Looking For Brake Assemblies And Hubs For Dexter 4,400 lb EZ-Lube Axles
  Hello Gilbert, thanks for reaching out. We do have brakes and hubs for Dexter 4,400 lb axles, but the sizing for these 4.4K axles can be funky depending when they were made. The best way to confirm what you need is with the casting number on the current hubs. That'll tell us exactly what brakes, hubs and bearings will fit. There should be a casting number visible right on the front of your brake drums. For example, what the 4.4K axles typically use are 10" brake assemblies like part #...
  view full answer...
• Converting Hubs From Grease To Oil Bath On 2014 Outback 298RE Travel Trailer
  Hey Perry, thanks for reaching out. We certainly should have the parts you need for an oil bath conversion, but I will need to collect a bit more info on your axle in order to be sure you get the right parts. First I will need to know the weight capacity of each axle. That will help a lot to narrow down the right parts. I will also need to know the bearing sizes and seal size for your hub. You will need to get brand new bearings since you are switching over to oil. The best way to determine...
  view full answer...
• What is the Inner Diameter of the 3,500 lbs Dexter Trailer Idler Hub Assembly?
  The Dexter Trailer Idler Hub Assembly for 3,500-lb Axles item # 84545UC1-EZ fits a item # L68149 bearing which has a 1.378" inner diameter. I would not recommend using this hub on a boat trailer. Instead, you'll want a galvanized one like item # AKIHUB-545-35-G-EZ-K. It's designed to get wet so it'll last longer. What kind of boat trailer do you have?
  view full answer...
• How To Match Up Hub And Bearings For KH71744 On Trailer
  We will need some more information in order to track down a new hub to fit your assembly K-H 71744. Pull off your old hub and look for numbers stamped into the bearings. If you do not see the numbers then you will need to use 4" Carbon Fiber Digital Caliper # PTW80157 or similar tool to measure the spindle (see photo). You will also want to verify the weight rating/capacity of your axles. Now that you have the essential information you can click on the link I attached regarding trailer...
  view full answer...
  
• Replacement Hub and Brake Assembly for AL-KO 8490
  Based on what information I could find about AL-KO 8490 hub and drums, it is rated for 3,500 pound axles, has a 5 on 4-1/2 bolt pattern, and is a 10 by 2-1/4 inch drum. If this is the case, we have several options for you. I have attached a link to all of our 10 by 2-1/4 inch, 5 on 4-1/2 hub and drum assemblies for 3,500 pound axles. I recommend the etrailer.com Hub and Drum Assembly # AKHD-545-35-K. This hub and drum uses # L68149 inner bearing and # L44649 outer bearings. If you can...
  view full answer...
• Do You Know the Difference Between a 11033 Hub and My 11033L Hub?
  While we cannot confirm for sure what the "L" means on the 11033L, the "L" does not make a differences when coming to fitment of the hub. With that being said, the Tie Down Engineering 11033 hub has a 5 on 4-1/2" bolt pattern and is designed for 3500-lb axles. Replacement hubs that have these specs typically use a # L68149 inner bearing and # L44649 outer bearing, as well as inner race # L68111, outer race # L44610 and grease seals with inner diameter of 1.719" and outer diameter of 2.565". You'll...
  view full answer...