Replacement Hub and Brake Assembly for AL-KO 8490
Updated 02/10/2020 | Published 09/19/2015 >
Products Featured in This Question
Question:
I need to replace a drum on my travel trailer. it says AL-KO 8490 on it. It also says Max. Dia. 10.090, looks like it says 5621 not sure if the second number is a 6 or not, and WF5. Also what brake pads would you recommend for this hub? Thanks fir your help.
asked by: John L
Helpful Expert Reply:
Based on what information I could find about AL-KO 8490 hub and drums, it is rated for 3,500 pound axles, has a 5 on 4-1/2 bolt pattern, and is a 10 by 2-1/4 inch drum. If this is the case, we have several options for you. I have attached a link to all of our 10 by 2-1/4 inch, 5 on 4-1/2 hub and drum assemblies for 3,500 pound axles.
I recommend the etrailer.com Hub and Drum Assembly # AKHD-545-35-K. This hub and drum uses # L68149 inner bearing and # L44649 outer bearings. If you can let me know the inner and outer bearing numbers your existing hub uses, as well as the wheel bolt pattern, I will be happy to make a more specific recommendation or confirm that this hub will fit.
For brakes on the 10 x 2-1/4 inch drum on your Hayes/AL-KO axle, I recommend # AKEBRK-35-SA for new brakes. These are self adjusting brakes so once they're adjusted when you first install them you won't have to do it again.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer brakes
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer hubs and drums
- Search Results: trailer drum
- Search Results: rv door catch
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: electric trailer jack
- Search Results: akhd54535ezk
- Search Results: trailer hub and drum assembly ~ 3500~lb axles ~ 10" diameter ~ 5 on 4~
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Video: Review of Lippert Trailer Hubs and Drums - Pre Greased Trailer Hub Drum 3500lb Axle - LC89ZP
- Q&A: Replacement Trailer Hub and Drum and Brakes for AL-KO 8490 Axle
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Trailer Hitch
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: How to Fix a Bad Trailer Ground
- Shop: Trailer Wiring
- Q&A: Troubleshooting an Electric Over Hydraulic Actuator that Randomly Locked Trailer Brakes.
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Q&A: Replacement Drum Assemblies for AL-KO 8490 Hubs
- Shop: Fifth Wheel Hitch
- Video: Feature Review Trailer Hub and Drum Assembly
- Q&A: Recommended Suspension Support While Towing a Trailer w/a 2023 Chevy Colorado ZR2
- Video: Review of Terran Industries Trailer Brakes - Left And Right Hand Self Adjusting Electric - TX97ZJ
- Video: Review of Lippert Trailer Brakes - Electric 10 Inch L R Trailer Brake Assemblies ABS Hubs - LC73PX




Mark P.
2/7/2020
my blot pattern on my al-ko 8490 is 4.800 or 4 3/4 not 4-1/2 do you have a drum this size