2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath

Updated 01/28/2025 | Published 05/12/2021

Products Featured in This Question

Kodiak XL ProLube Kit for 3500-lb Axles

(79)

$94.91

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2946)

$15.39

Replacement Race for L44643 and L44649 Bearings

(1282)

$4.43

Replacement Trailer Hub Bearing - L44649

(2137)

$22.19

Replacement Race for L68149 Bearing

(1282)

$7.59

Replacement Trailer Hub Bearing - L68149

(2137)

$17.90

Replacement Seal for Kodiak XL ProLube Kit for 3500-lb Axles

(22)

$25.49

Question:

I have a 2005 Ranger Trail boat trailer, with oil bath hubs. I talked to Ranger and the bearings are on back order, but they gave me their part number as well as the manufacture part number. Can you supply the bearings and races with these numbers? Inner bearing is: Ranger #141478 mfg. #11060. The race is Ranger #140724- -mfg.# is 11061. The outer bearing is Ranger #204114 mfg. #11054. The race is Ranger #140723 mfg. #11055. If you have these Ill take-em. Thanks in advance for your help

asked by: Danny R

Expert Reply:

The Bearing Kit # BK2-100 will contain the new bearings, races, grease seal, tang washer and cotter pin for replacing the bearings on your 2005 Ranger Trail Boat Trailer.

The Inner Bearing # L68149, Inner Race # L68111, Outer Bearing # L44649 and Outer Race # L44610 can also be purchased separately and used with the Kodiak XL ProLube Kit # XLPROLUBE1980KIT if you are converting to an oil bath hub.

If you already have an oil bath setup the Oil Seal # XLPROLUBE1980SEAL will be the correct oil seal to use with the new bearings and races.

expert reply by: Bud M

John P.

1/28/2025

Looking for replacement oil cooled hubs for 2005 Ranger Trail tandem axle trailer

Jon G.

1/28/2025

@JohnP What is the weight rating of your axle(s) and how many do you have? Are you looking to replace the hubs with an exact match, or wanting to replace them with grease?

John P.

1/28/2025

@JonG 2500lb its tandem axle (4) would rather have oil cooled

Jon G.

1/28/2025

@JohnP The closest kit we have for a 2,500 lb axle is the Kodiak XL ProLube Kit # XLPROLUBE1980KIT. This is designed for 3,500 lb axles but might still work depending on what spindle size you have. This comes with oil caps that fit a 1.98" hub bore and then uses a seal that fits a 1.72" spindle diameter. If you have something else please let me know and I'll see if there are any parts we can piece together for you!