Replacement Hub Assembly for T.D.E. 11033
Updated 05/27/2020 | Published 10/23/2019
Products Featured in This Question
Question:
what is the part # for a replacement hub assembly for the T.D.E. Part # 11033?
asked by: Josh Y
Helpful Expert Reply:
From what I was able to find out from my research, the Tie Down Engineering 11033 hub has a 5 on 4-1/2" bolt pattern and is designed for 3500-lb axles. Replacement hubs that have these specs typically use a # L68149 inner bearing and # L44649 outer bearing, as well as inner race # L68111 , outer race # L44610 and grease seals with inner diameter of 1.719" and outer diameter of 2.565".
You'll want to verify that your current hubs have these bearings, races and seals to ensure that a replacement hub will fit on your spindle. If you do have those components, a good replacement hub assembly to replace your T.D.E. 11033 hub with those components is the Trailer Idler Hub Assembly for 3500-lb Axles # AKIHUB-545-35-PG-K . This kit comes with the bearings, races, seal, grease cap, and lug nuts included and is a pre-greased hub so you won't need to worry about dealing with packing and greasing the bearings.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Search Results: 5 lug hubs
- Search Results: trailer hubs and drums
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Search Results: hub studs
- Q&A: Help Picking Out Replacement Hub for TDE 11033
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-EZ-K
- Search Results: spindle nut
- Search Results: dexter axle trailer brakes
- Search Results: dexter axles
- Shop: Gooseneck Hitch
- Search Results: akihub~545~35~pg~k
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: D-Shaped Rubber Seal for Enclosed Trailer - Stick On - 25' Long x 3/4" Wide
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Converting to Oil Bath Hubs on #84 Trailer Spindle
- Shop: Brake Controller
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Q&A: Replacement Hubs for TDE 11033 on 2005 Ranger Boat Trailer
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Breaking Down the D Washer for EZ Lube Spindles
- Video: Review of Dexter Trailer Axles - Trailer Spindles - Trailer Suspension Parts - DX82CR
Mike
5/24/2020
that hub assembly part# does not turn up anything