TPMS Sensor - Mounts to Valve Stems

Yes, it does! The TST TPMS for RVs item #TST-507-RV-6-C actively monitors your tire's pressure even when your RV is idle. If your sitting for awhile, like days or even weeks, it will take up to a couple minutes for the sensors to send data. What…

The valve stems that come with the Tuson Towable Tire Pressure Monitoring System - 6 Sensors #335TPMS6WIVS are a little longer than what the standard valve stem length is so you could potentially run into a problem fitting an air hose over it with a…

According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…

Hey Neal, It's totally normal to add on an air chuck extension to your compressor or the Viair Portable RV Air Compressor Kit #VA99WR you were looking at to reach the inner tire of a dual wheel setup. We currently only offer one solid extension…

Hello Shane, Great question, and I am going to need you pin box number to ensure we are getting you the right part number. If you are unsure of your pin box number, please feel free to send me the information off of the sticker on your current Pin…

Hello Dennis, thanks for reaching out. The repeater, or lack thereof, would definitely explain why your monitor is not picking up the sensors. I took a screenshot of the installation instructions for the Signal Booster/Repeater #TST-507-R and…

Hello Steve, thanks for getting in touch. The TST 507 Series 4 Internal Sensor TPMS System Color Display and Repeater SKU TST-507-INT-4-C and our part #TST34FR are one and the same. We simply use our own unique part numbers for these in place of the…

Hey Dave, thanks for reaching out! You don't need to add a controller for each panel, just as long as your controller is rated for the power of all of your panels. For example, the etrailer Solar Expansion Kit #e72PR is rated for 195 watts so two…

Hey Jeff, thanks for reaching out. Aside from the suction cup mount, there is one other mount for 7" WiSight display. Take a look at the Voyager Universal Mount #VOSHD6MNT. This allows for permanent installation on your dash and uses a ball and…

Hello, and thanks for providing all of that information for your axle. I had my contact at Lippert run the item number and serial number. Your axle is a standard 3,500 lb axle and it used the standard bearing and seal sizing. Our bearing kit #BK2-100…

Hey Tom, My favorite TPMS for trailers is from TireMinder because of its quality - this TPMS is consistently reviewed highly by customers on our site, and is what I would personally go with. I'm going to assume you have a double axle trailer and…

Hello Ryan, thanks for reaching out. No, the #LH28FR wheel will not work with 1/2" wheel studs. It should only be used with 9/16" studs. 1/2" studs would leave open space in the lug hole and this would eventually eat up and destroy…

Yes, it does! The TST TPMS for RVs item #TST-507-RV-6-C actively monitors your tire's pressure even when your RV is idle. If your sitting for awhile, like days or even weeks, it will take up to a couple minutes for the sensors to send data. What…

The valve stems that come with the Tuson Towable Tire Pressure Monitoring System - 6 Sensors #335TPMS6WIVS are a little longer than what the standard valve stem length is so you could potentially run into a problem fitting an air hose over it with a…

According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…

Hey Neal, It's totally normal to add on an air chuck extension to your compressor or the Viair Portable RV Air Compressor Kit #VA99WR you were looking at to reach the inner tire of a dual wheel setup. We currently only offer one solid extension…

Hello Shane, Great question, and I am going to need you pin box number to ensure we are getting you the right part number. If you are unsure of your pin box number, please feel free to send me the information off of the sticker on your current Pin…

Hello Dennis, thanks for reaching out. The repeater, or lack thereof, would definitely explain why your monitor is not picking up the sensors. I took a screenshot of the installation instructions for the Signal Booster/Repeater #TST-507-R and…

Hello Steve, thanks for getting in touch. The TST 507 Series 4 Internal Sensor TPMS System Color Display and Repeater SKU TST-507-INT-4-C and our part #TST34FR are one and the same. We simply use our own unique part numbers for these in place of the…

Hey Dave, thanks for reaching out! You don't need to add a controller for each panel, just as long as your controller is rated for the power of all of your panels. For example, the etrailer Solar Expansion Kit #e72PR is rated for 195 watts so two…

Hey Jeff, thanks for reaching out. Aside from the suction cup mount, there is one other mount for 7" WiSight display. Take a look at the Voyager Universal Mount #VOSHD6MNT. This allows for permanent installation on your dash and uses a ball and…

Hello, and thanks for providing all of that information for your axle. I had my contact at Lippert run the item number and serial number. Your axle is a standard 3,500 lb axle and it used the standard bearing and seal sizing. Our bearing kit #BK2-100…

Hey Tom, My favorite TPMS for trailers is from TireMinder because of its quality - this TPMS is consistently reviewed highly by customers on our site, and is what I would personally go with. I'm going to assume you have a double axle trailer and…

Hello Ryan, thanks for reaching out. No, the #LH28FR wheel will not work with 1/2" wheel studs. It should only be used with 9/16" studs. 1/2" studs would leave open space in the lug hole and this would eventually eat up and destroy…