Video Transcript for Review of TST RV TPMS System - Flow Thru Sensors - TST94VR

Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this TST Tire Pressure Monitoring System with the color touchscreen display and the four Flow Thru Sensors. Now this TPMS kit, it's gonna let you monitor your vehicle's tire pressure and temperature using this included color touchscreen display. This will also work great with your motor home, your fifth wheel or your trailer, and it will include everything laid out here on the table. Again, this is a five-inch color touchscreen display. Right over here we have the magnetic suction cup mount.

We have a 12-volt power adapter that you can plug into your 12-volt plug, and then use this USBC cable to plug into that, and then the USBC plugs in to charge your monitor. It comes with the four Flow Thru sensors, it comes with a repeater right here, and then some theft resistant hardware with the wrenches to keep anybody from removing these from your valve stems. Now, we'll start with the monitor itself. This is a color touchscreen monitor. We'll go ahead and turn it on, there's a little lever on the side, just push it up.

And this color touchscreen monitor is gonna provide early warning detection with visual and audible alerts. It's very easy to navigate with your touch screen, just like your smartphone. You can see, it says parameter settings, so you just touch it, and then you can set whatever parameters you need. PSI bar, shows your temperature, your settings, and then again, when you're done, just exit, exit without saving. And then it'll show you your temperature settings, your PSI settings, if you need to go back to the main menu.

Very easy to operate. This will help detect blowout, significant pressure changes, and tire temperatures exceeding 158 degrees. This will refresh automatically with new tire information about every five minutes. And it has presets on it that'll let you monitor up to four trailers or 115 tires by using additional sensors. Those sensors we do sell separate on our website.

Give an idea of the size of this, the length of it is about five and a quarter inches long, height, about three and five-eighths inches tall, add one inch for the antenna if you want, and then the depth's about one inch deep. Now right here, the USBC cable and the adapter we talked about, this is gonna let you charge that monitor with your 12-volt accessory outlet. Basically, you can plug that into the accessory outlet, plug the USB in there, and then plug the C into your monitor. The battery life is about five days to seven days on a full charge, the recharge time is about four hours. Now, we also mentioned this magnetic suction cup mount, this allows for best monitoring position. It's a very easy-use section cut mount, it lets you stick it to either the dashboard, and then this is a strong magnet, you can see that it'll hold it, adjust where you want it, or flip it over, stick it to your windshield, and same way, and adjust it how you need it. Now the Flow Thru sensors, there's four of 'em. These will check your tire pressure and temperature every 12 seconds. And what's nice, these are the flow through sensors instead of the standard cap sensors that you used to just screw on, and then to put air in them or take care of you have to remove them, these flow through sensors are gonna let you adjust your tire pressure without having to be removed. They are a nice brass construction, designed for use on metal valve stems. You do only want to use the Flow Thru ones on metal valve stems, this is a metal valve stem. And you can see, you take your cap off, and then just go ahead and screw these on. And then once they're screwed on, you can set your settings that you need. Again, easy installation, just screws onto the valve. Now, they do offer theft-resistant hardware, if you're afraid somebody's gonna come along and just unscrew those. What you can do is, the theft resistant hardware is gonna include some brass lock nuts that you'll wanna put on first, like that, and then go ahead and screw your sensor on. And then once you get your sensor all the way screwed on, then what you can do is tighten this up to it, and then use the specially designed wrench that'll go on there, and you just tighten it as tight as you need it, and then that'll keep anybody from trying to loosen it. So that's a nice feature to have. And that's all included. Now, the tire sensors themselves, we can just go ahead and take the hardware off here. The tire sensors, they have a pressure range from one PSI to 218 PSI. The battery life on 'em is one to one and a half years. And they do have a replaceable battery in 'em, it's a standard 2032 battery. If you need to replace it, you just unscrew that cap, put your new battery in, they give you some extra seals, O-ring seals that you put in there, tighten it down, and you're ready to go. Now the repeater right over here, this will help strengthen your sensor signal from the sensor to the monitor, and it eliminates electronic interference. The wire on this is about 57 inches long. But again, on your monitor, so you can see, you go back, hit different settings, exit them, and then to turn it off, just slide the lever down. But that's gonna do it for a look at this TST Tire Pressure Monitoring System with the color touchscreen display and the four Flow Thru Sensors.