You depend on these tires. Blowouts and breakdowns are not an option. 8 Internal sensors are the perfect long-term solution, with a complete system that monitors your tires constantly and alerts you to problems long before they happen.
Blowouts and breakdowns are in the back of your mind every time you're cruising down the road, and you're done worrying about it. This TPMS kit is an easy way to keep an eye on everything going on with your tires. It can alert you to blowouts, pressure changes, and temperatures exceeding 158 degrees with both visual and audible alarms. The system automatically refreshes every 12 seconds to give you accurate, current information. The monitor sits on your dash with either the suction cup holder or the cradle mount and is full color so you can read it easily. It plugs into your vehicle's 12V accessory outlet with the included micro-USB cord. If you wanted to add even more sensors, the monitor can keep track of up to 4 trailers and 115 tires!
These internal sensors are well-suited to a full-timer or professional. Sheltered from the elements with batteries made to last up to 4 years, they are made for the long haul. Because of their internal position, they are both safe from theft and able to give you pin-point accurate readings. They will require a professional installation, as the tire has to be removed for them to be installed, but once they are installed, they require no maintenance.
This kit comes with a booster included so that the signal from the sensor is guaranteed to reach the monitor, no matter how far your tire is from the cab.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this TST tire pressure monitoring system with the color display and the eight internal tire sensors. Now, this TPMS kit is gonna let you monitor your vehicle's tire pressure and temperature via this included color monitor right here. This will also work great with your motorhome, fifth wheel or trailer. It will include everything right out here on the table. It includes the color display right here.
It includes the cradle mount that you can hold your monitor in. It includes the suction cup mount that you can put onto a window and, again, put your, hang it just like that. It does also include this 12 volt power adapter and this micro-USB cable to be able to charge that monitor. We mention eight internal sensors with the stainless steel bands, the repeater right here, and then a nice installation manual that'll describe how all this goes together and operates. Now, the monitor right here, it is a color widescreen monitor.
It'll provide early warning detection with visual and audible alerts. It detects blowouts, significant pressure changes, and tire temperatures exceeding 158 degrees. And what's nice is this will refresh automatically with new tire information every five minutes, and it offers presets to let you monitor up to four trailers or 115 tires with additional sensors. Now, the additional sensors we do sell separately on our website. Now, we mentioned the micro-USB cable and the 12 volt adapter here.
This will let you charge the monitor with your vehicle's 12 volt accessory outlet. When you charge this, the battery life is about five days to seven days on a full charge. The recharge time is about four hours. We mentioned the multiple mounts that allow optimal monitor positioning. The easy-to-use suction cup mount, this will let you stick the monitor to your windshield or your dashboard.
And over here is that nonslip rubber cradle that'll let you set the monitor on the dashboard. You can see it'll hold it in place, and it keeps it from sliding around. Now, the eight internal sensors right here, these are gonna check your tire pressure and temperature every 12 seconds. The internal design will provide more accurate temperature measurements when compared with the valve stem mounted tire sensors. And it is a very easy installation onto the inside of most wheels. Basically, the sensor will slide onto the hose clamp, and then that hose clamp wraps around your wheel. Tighten it with a screwdriver, trim off any excess strap. And the clamps are stainless steel, so they will resist corrosion. And the internal sensors, the pressure range, they'll read from 1 PSI to 218 PSI. And the battery life on these internal sensors are up to four years. And we mentioned the repeater right here. This repeater you can install will strengthen the sensor signal and eliminate any electronic interference. Now, also, always remember, if you have any questions regarding this product or any of our products, please don't hesitate to contact us via phone, chat, or email. Or if you've purchased any product from us before, please send us pictures of it being used in your application 'cause we'd love to see how those products are working out for you. But that's gonna do it for a look at the TST tire pressure monitoring system with the color display and the eight internal tire sensors.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.