Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
(756 reviews)
Price: $825.00
In Stock
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
Item # EQ37060ET
Our Price: $825.00
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (756)
- Q & A (0)
- Photos
Equal-i-zer Weight Distribution Hitch - EQ37060ET
- 400 lbs
- 500 lbs
- Fits 2 Inch Hitch
- WD With Sway Control
- Allows Backing Up
- Equal-i-zer
- Electric Brake Compatible
- Surge Brake Compatible
- Some Sway
Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. 2" Hitch ball and adjustable shank included.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for stability and control
- Creates a level ride for both tow vehicle and trailer
- Integrated 4-Point Sway Control limits side-to-side movement
- Brackets keep spring bars in place for a rigid system that holds trailer in line
- No lift chains - eliminate unwanted movement
- Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
- Unique design makes system compatible with surge-type brake actuators
- Spring bars flex for a controlled, even ride
- Constructed of chromoly steel for superior dexterity and spring
- No-drill, clamp-on brackets can be adjusted along the trailer frame
- Accommodates frame-mounted items such as gas tanks, battery boxes, toolboxes, or generators
- Desired tilt is achieved with traditional washer design
- Add or remove washers from spacer rivet to tilt head up or down
- Dipped steel construction is durable and corrosion resistant
- Snap-up lever eases installation by reducing lifting required by trailer jack
- System includes head assembly, adjustable shank, spring bars, sway control brackets, lift handle, hitch ball, pin and clip, and all necessary hardware
- 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation
- Made in the USA
Specs:
- Tongue weight: 200 lbs - 600 lbs
- Gross towing weight: 6,000 lbs
- Ball size: 2"
- Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
- Sway control bracket positioning: 27" - 32" back from center of coupler
- Maximum trailer frame height: 6"
- Shank length:
- 8" From center of hitch pin hole to center of adjustment holes
- 9" From center of hitch pin hole to front of shank
- 7" From center of hitch pin hole to back of shank
- 12" Overall
- Total height adjustment along shank: 7-1/2"
- Maximum rise: 7"
- Maximum drop: 3"
- Overall height: 9-1/2"
- Holes are spaced 1-1/4" apart on center
- Spring bar dimensions: 36" long x 1-1/4" wide
- Limited lifetime warranty
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
90-00-0600 Equal-i-zer Weight Distribution Hitch
| n/a |
|
Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight Distribution System
The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.
Features of the Equal-i-zer
Head Tilt Adjustment
The Equal-i-zer weight distribution system uses the traditional washer-style adjustment method to achieve the perfect tilt. Controlling the head tilt helps you to fine-tune the leverage on your entire system, making it easier to install and hook up the spring bars. To adjust the tilt, simply slide washers onto the spacer rivet and insert the rivet into the head assembly. To increase the angle, add a washer. To reduce the angle, remove a washer. Most setups take four to six washers to achieve the proper height. Once you get the desired tilt, insert the shank bolts to secure the head to the shank and then tighten it in place.
Construction of Spring Arms
The Equal-i-zer spring bars are not made of traditional spring steel. Rather, they are constructed of a chromium-molybdenum alloy steel. Chromoly steel has a high tensile strength for extreme durability. It also features excellent dexterity, which allows it to give as required and then return softly back to its original form. This pliability is important in minimizing trailer bounce while still ensuring that the weight of your rig is adequately distributed.
Fixed Sway Control Brackets
The unique sway control brackets of the Equal-i-zer are easy to install and simple to use. They clamp onto your trailer frame and conveniently adjust to a position anywhere between 27 inches and 32 inches back from the coupler. These brackets provide the attachment points for the weight distribution spring bars. To position the spring bars during hookup, simply use the included snap-up lever to lift each bar into place on the L-shaped brackets. Then secure the bars in place with the included L-pins and clips.
Equal-i-zer Hitch 4-Point Sway Control
The Equal-i-zer weight distribution system works to stop trailer sway before it begins. This is achieved through the rotational friction that is present in the weight distribution hitch itself. Within the system head, the downward pressure that is placed on the hitch ball by the trailer is combatted by the upward pressure exerted by the spring bars that are mounted in the sockets. This upward force is placed on the spring bars on either side of the system, creating the rotational friction that, essentially, forces your trailer in line. This type of friction is responsible for two points - one on either side of the trailer - of the 4-Point Sway Control. To ensure that enough tension is present, make certain that the socket bolts in the head assembly are torqued to at least 45 foot-pounds.
The other two points of sway control are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system. Letting the spring bars hang freely minimizes the rotational friction described earlier. It also eliminates your system's ability to create the type of direct friction that has been shown to be so effective in limiting trailer sway.
This direct friction that is applied to the spring bars in the Equal-i-zer system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction sway control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.
Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the Equal-i-zer uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway control system.
EQ37060ET Equalizer Weight Distribution Hitch with Adjustable Shank and Hitch Ball - 6K
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Wrong item shipped
Customer Reviews
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW - EQ37060ET
Average Customer Rating: 4.8 out of 5 stars (756 Customer Reviews)
Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle. 2" Hitch ball and adjustable shank included.by: Lance03/23/2024
All products are great and as expected. One box was damaged in shipment due to the heavy nature of the parts. A smaller part fell out through a hole in box. George at etrailer got me a replacement part quickly with no issues.
by: Randy09/15/2023
One of the most important parts of this system is the Ball, so the customer should be asked for their Ball size and that should be what they send with the system, or they should specify you need to purchase the correct ball size with the system. Instead, they sent a 2" ball which I missed in the description of what comes with it, that's my fault. Now I have to search around for the correct Ball to fit my trailer and the system, and I'm stuck with a worthless 2" ball with a large shank that doesn't fit 90% of all ball shanks. I emailed Trailer about this and their reply was it comes with a 2" ball... not helpful.
by: Kelly K11/03/2018
Excellent product. This is my 2nd Equalizer hitch. First one was a 10,000lb I used on my 29ft Keystone Camper that was around 8500lbs loaded towing with an 04 F250. I now have a 6,000lb I am using on my 6x12 V-nose around 3500lbs with a 600lb tounge weight towing with a 2016 Tacoma. These hitches make a world of difference when towing & are pretty easy to setup. Especially after doing it once lol.
by: Kathy C.11/15/2019
I towed my trailer out West in July. No problems on windy roads thanks to your product!
by: Tom O.09/19/2019
Provides excellent sway control and load distribution for my camping trailer.
It was also easy to install and setup.
by: Rob S.06/02/2020
I really couldn't figure out how this device was going to help with towing our 19' RV. From an engineering standpoint I'm still baffled. The RV center applied it to our new Coachmen Apex Nano so I don't have the experience of installing it myself. They made it seem simple. The only "special" tool they used was a high-torque air gun to secure the ball. I was seriously concerned that the weight of the RV (3,500 Lbs.) would try to control my Dodge Ram ProMaster 2500 van. While the van could certainly use more towing power, I was blown away at how smoothly it towed the RV. I expected very little and was pleasantly surprised by the performance of this system. The first year I put 600 miles on our RV and was never once disappointed or regretful of my purchase. It's really nice that reversing the vehicle has no adverse effect. Some stabilizers won't allow you to reverse. The cost of the unit was a little shocking at first and you may ask yourself where all the money is with just a few heavy metal pieces. The money is in the magic of the performance. Spend the extra dollars on the best, it's worth the peace of mind while towing.
by: David07/30/2018
Would have been 5star.
The hitch it well built and strong. I was told by the E-Trailer operator that it came with a 2in ball already installed. Come to find out it doesn’t. This is frustrating now our trip is going to be postponed or canceled. Apparently you need a special sockoand short thread 2in ball. Bummer
Mike L.
8/1/2018
The ball is included, but not installed. We offer the 1-78 inch thin-wall socket as part # EQ70-00-4800.
Helpful Links
by: Edgar12/20/2018
Love It Put over 5000 miles towing not one bit of trouble
4000 LB 21 RBS Livin Lite Pulled by 2015 Toyota Tacoma
by: Mark W01/10/2019
I have been using my Equalizer weight distribution hitch for a year now. It truly is the best hitch I have ever used. Towing through high winds in eastern Oregon, Idaho and Wyoming our trailer (a 21 foot Escape) tracked perfect with no sway what-so-ever. Also there was one occasion that I had to make a very sudden stop to avoid a deer running in front of me. The trailer was rock solid, with no sway. Thank you Equalizer. It took a little time to set up the system properly, but, with a little help from a few friends it was easy. I found it important to have a local tire shop assist in torquing everything to the recommended specs. Great product and lots of good support from eTrailer.
Mark W.
1/11/2020
The Equalizer hitch continues to work great. During our many camping trips throughout British Columbia, Montana and the Oregon Coast the hitch has kept our trailer in-line and we have had no swaying issues in some very heavy weather. Great product and well worth the money!
by: Rahul03/06/2019
Ever since we purchased this Weight distribution system, we have been on 7 trips with our travel trailer. Every trip the system far exceeded our expectation. The built quality is amazing and by the looks of it, it will last a lifetime if taken care off properly. We would recommend this system to anyone planning to tow their travel trailer and wants the peace of mind that a gust of wind or fast-moving tractor trailer is NOT going to have you take evasive maneuvers.
Rahul
3/7/2020
An year later and 18 trips in, the Equalizer weight distribution system is as good as it was on day one. You dont always get to see/feel it working but the confidence we have taking our trailer on highways knowing that this system is doing exactly what it should grows with every trip. The system is definitely worth considering for anyone who tows anything that is more than 2000 pounds in weight.
by: James L.03/18/2017
The new hitch allowed us to get our camper almost exactly level. It barely feels like we have something hooked to the truck. We get no wind pushing us around when trucks pass us on the interstate. It was easy to attach to our camper. Your shipment came in exactly when you said it would. Thank you very much for your good service and for the good hitch.
James L.
3/18/2018
I have loved your hitches since 1995. We pulled a camper for 10 years without one and basically started avoiding the interstate highways because of what happened when trucks passed us. The guy at the place we stored our camper had a used Equilizer that we bought and used for 12 years. We got a new tow vehicle with a higher hitch and the old Equilizer was welded and could not be adjusted. Thats when we bought the new one. I watch people at the campgrounds wrestling with other hitches and I just calmly hook mine up and go. I hardly feel the camper behind us. You have a great product and I will use it till I cant camp any more.
by: Roger04/25/2022
The Equalizer weight distribution system works very well. Sway and bounce are eliminated. Unfortunately, the unit does not come with the plastic sway bracket jackets (Item # EQ95-01-5150) so add those when ordering. The recommended grease (part # 91-00-4250) is also not included but any quality bearing grease will suffice. The plastic jackets eliminate a lot of the noise usually heard when turning, while also protecting the bars and brackets from wear & tear. The installation instructions are well written. Someone with average knowledge of tools should have no problem installing this unit by themselves. Locating a 1 7/8" thin wall socket and a torque wrench capable of 430 lbs to install the ball to the hitch head is the only real challenge. I ended up buying a large 3/4" socket set from Harbor Frieght. I used the long breaker bar from the set and a long pipe to get the ball nut tight, then my friendly local truck repair shop adjusted the torque to the proper specs using their obscenely expensive Snap-On brand monster torque wrench. It only cost me a round of coffee. After initial set up, attaching and removing the unit between truck and trailer is quick and easy. I recommend this item.
by: Criag10/05/2022
The usual great service from etrailer. Second of these hitches I’ve mounted and they’re great.
by: Dana06/16/2019
Hauling 21 ft. travel trailer. Big difference in how it tows with this hitch as opposed to hauling without an equalizer hitch. Highly recommend this hitch, none better. I have hauled around 4000 miles, mostly mountain roads in the west, with some good winds and my trailer is rock solid with this hitch. Do not tow without a equalizer hitch and if you want the best, get this one. Excellent customer service from e-trailer on this and everything I order from them. About to order rear stabilizer coupler and pins to fix electric stabilizer from them.
by: Andrew F.09/12/2019
We purchased a 19 foot RV travel trailer last year, and even though this may be considered a smaller trailer, it was considerably bigger and heavier than the pop up trailers we have used for the last 20 years, so a new venture for us.
I knew I wanted a weight distribution and sway control hitch, but was not sure which to buy. So, I posted the question on this site, and this hitch was the one recommendation by this site's representative.
The quality of the hitch and hardware is excellent, and the instructions for installation and adjustment were very clear and easy to understand.
So far, we have pulled the trailer on several trips from East Tennessee to central WV.
On the long stretches of freeway driving, often with heavy traffic, and on the steep grades, and curves going over the mountains, I was very pleased with the performance of this hitch. The hitch provides excellent sway control, and with proper adjustment there are absolutely no steering or handling issues with the tow vehicle.
The guys on this site know their stuff!
by: Ed05/03/2017
Entire order went very well except that I put the wrong address on my credit card information. Donna, from customer service, called and got everything cleared up and my order was shipped within hours. I havent used the hitch yet but it was all in excellent condition.
Ed
5/10/2018
Installation went well and we have been towing our rv since with no problems at all. I have had no sway at all with the hitch.
by: Brett12/03/2022
Straight forward install on our 22’ Airstream. Experienced zero sway issues on 5 trips that have included highway speeds. Would purchase again.
by: Charlie O.04/03/2019
The Equalizer has been a great hitch. I needed the sway control more than the weight distribution in windy Kansas, and this hitch virtually eliminated sway. The weight distribution does alleviate bouncing and makes me feel completely in control of the trailer. I bought the pads to control noise, and I’m glad I did. No complaints.
The only downside is that the hitch is heavy and bulky. I’ve yet to find a simple and clean place to store it.
by: Craig08/31/2017
Truck:
2015 F150 crew 4x4
2.7L eco
Trailer:
Jayco Jayflight
4100 lbs dry
Great product. Sway and bounce are eliminated.
Craig
8/31/2018
After 1 year and many trips, no problems with the Equalizer hitch.
by: Thomas03/25/2018
Excellent! This has been a great product for me. As a first time travel trailer owner I was concerned with the safety of towing a trailer and concerned with controlling swaying of the trailer and tow vehicle. I had towed a rental trailer once and got a good scare when it started swaying when I tried to pass a transport truck. I set this up using the provided instructions and all worked great. Tow vehicle is level and no swaying in traffic or in very windy conditions. I even had to change tow vehicles in the middle of an extended trip and the conversion to the new vehicle was very easy even though I was "on the road". I just followed the instructions again and all worked very well.
I highly recommend this unit.
by: Matthew06/20/2019
I can't speak on the hitch itself because I was never able to use it, but I hear great things. However, I want to save someone else the hassle here, so if your camper trailer has a propane or battery platform on the top side of the V hitch/tongue - you may need to do some serious modifications to put the brackets in the correct position. Check the manual and measure before you order!
by: VT_Dude07/18/2018
I just drove from VT to PA to SC to MD to CT and back to VT, close to 3K miles and this weight distribution/sway control worked great ( I think it did, my first sway bar). Not sure on the effectiveness of the weight distribution as I was pulling with 2018 Jeep G.C. and that SUV does not sag under 500 lbs tongue weight. You can feel that you are pulling a trailer when a semi passes you going over 80 miles an hour, or when you get hit with a side wind on a bridge, but all other conditions are fine (e.g. passing semi truck or normal side wind). Easy to back up into any place. On advice to everybody, keep it lubricated, if you don't, enjoy screeching noise with every turn :). Happy towing.
by: Chuck08/12/2019
Spoke with a knowledgable gal at etrailer.com and she convinced me this is the best hitch to use. I ordered it on Sunday evening, it arrived on Tuesday and was in perfect condition. Hitch took 3 hours to install. A $12.00 (regular wall thickness) 1-7/8 was needed from [on-line retailer]. Hitch works very well. So glad I didn’t buy a cheap hitch. This one does everything well. Highly recommend etrailer.com, EQ37060ET Hitch and 3/4 Drive 12 pt. Socket with (3/4 to 1/2 adapter) socket. I will continue to do business with etrailer.com.
by: Tim06/25/2019
My forst equalizer hitch is a winner. Way easier to use than my friend's version with the chains ... Easy setup and works great on my 4,000 lb. camper. Almost completely eliminated sway from passing trucks, etc. Can back up without unhooking which is great.
by: Todd A09/12/2017
I don't have any previous experience towing travel trailers to compare to, but I could definitely sense it's value and worth. On the first trip after installing the stabilizer, we encountered sustained winds and a large amount of truck traffic. The trailer was stable and tracked well. The installation is straightforward and took about 2 1/2 hours which included making a couple of adjustments and testing.
25
750
Show More Reviews
See what our Experts say about this Equal-i-zer Weight Distribution Hitch
- Recommendation For Weight Distribution System For Lance 1475 TrailerWhether or not you need a weight distribution hitch for you Lance 1475 depends on several things. 1. Is the trailer weight more than 50 percent of your vehicle's weight? 2. Is the rear of your tow vehicle sagging when the trailer is hooked up? 3. Is your trailer hitch designed to be used with weight distribution systems (will be listed on hitch/hitch sticker)? 4. Is your trailer prone to sway easily? If you answed "yes" to some or all of these questions then you should seriously...
view full answer... - Recommended Weight Distribution System for a Rpod 179 Trailer I recommend the Equal-i-zer Weight Distribution System item # EQ37060ET. This system has a tongue weight range of 200 lbs - 600 lbs so it would be perfect for your Rpod 179 trailer. Weight distribution systems are recommended based off of tongue weight. Tongue weight is typically between 10% and 15% of your trailer's total weight. This would give you a range of 260 lbs to 390 lbs. I really like the Equal-i-zer Weight Distribution System item # EQ37060ET because it has built in 4-point...
view full answer... - Determining Towing Capacity and Best Weight Distribution System for 2018 Jeep WranglerI took a look at the online owner's manual for your 2018 Jeep Wrangler JK and it lists a number of possible towing capacities for the Wrangler JK depending on its engine size, axle ratio, and particular trim model (Sahara, Sport, etc). The capacities range from 2,000 pounds to 3,500 pounds. Since your 3,000 pound trailer is right in the middle of this range I highly recommend verifying this information by checking your copy of the owner's manual. You can also visit your local Jeep dealer...
view full answer... - Recommended Way to Reduce Rear End Sag When Towing Lance 1575 Travel Trailer 2006 Toyota SequoiaThe Black SumoSprings Solo Custom Helper Springs # SS78DR having he higher weight capacity of 1,800lbs will not compress as far as the Blue # SS68DR with the same amount of weight. Do remember that with these on your 2006 Toyota Sequoia since the black springs are stiffer you will get that back as a firmer ride when you are unloaded. The best way to help with your rear sag is with a Equal-i-zer Weight Distribution System # EQ37060ET. This will allow you to transfer the weight from the...
view full answer... - How to Decrease Sag on 2016 Ram 1500 When TowingA Timbren Rear Suspension Enhancement System is a great way to reduce sag on your 2016 Ram 1500. They're easy to install without any drilling by replacing the factory bump stop. If your Ram is a Regular Cab, you will need # TDR1500DS. If you have the Crew or Quad cab, then you'll need # TDR1500DQ. I've included an installation video on a 2014 Ram which is a very similar process to yours. The best way to reduce sag is with a weight distribution system. A weight distribution system...
view full answer... - Parts Needed For Towing Trailer With Electric Brakes Behind a 2020 Hyundai PalisadeFirst you will need an etrailer Trailer Hitch Receiver # e95ZR for your 2020 Hyundai Palisade. This will accept your ball mount or weight distribution hitch for towing the trailer. Then you will need a Curt T-Connector Vehicle Wiring Harness # CU94FR. This will give you a 4-way flat connector that operates the lights on your trailer. It will connect to the Universal Installation Kit for Trailer Brake Controller # ETBC7 allowing you to install the Redarc Tow-Pro Liberty Brake Controller...
view full answer... - Weight Distribution System For A Draw-Tite Class III Hitch On A 2020 Jeep Wrangler UnlimitedAdding the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # DT78MR is a great option for a hitch on your 2020 Jeep Wrangler Unlimited. It is going to have the highest weigh capacity. The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW Item # EQ37060ET is going to work great with the draw-tite hitch. The 600lb/6000lb weight capacities on the weight distribution are going to be the maximum weight. With the draw-tite...
view full answer... - Towing a 4,500lb Jayco Travel Trailer With a 2012 Buick Enclave and 2013 Toyota HighlanerI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 for your 2012 Buick Enclave. This will install without any drilling or trimming of panels, but the door panel on the rear of the Buick will need to be removed and not reused. The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11141615 will give you a 4-way flat trailer connection. The Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you with the other wiring and parts necessary for installing...
view full answer... - Load Leveling For a 2019 Kia Sedona Pulling a Tent TrailerI recommend the Equal-i-zer Weight Distribution System # EQ37060ET for leveling your 2019 Kia Sedona. The weight distribution will allow you to level your ride height on your Sedona by providing a spring leverage that will distribute the weight to the front of the vehicle as well. This will also provide you with a sway control to make your drive safer in windy conditions and when traveling with large trucks on the highways. The hitch is rated for 200-600lbs of tongue weight, if your trailer...
view full answer... - Comparing Fastway e2 Round and Trunnion and Equal-i-zer Trunnion Weight Distribution SystemsBetween round bar systems like # FA94-00-0600 and trunnion systems like # FA92-00-0600, I recommend going with a trunnion system because it will provide you better ground clearance than the round bar system. The trunnion bars come straight out from the hitch head, while the round bars come down from the head before moving out. For the Fastway and Equalizer systems, the manufacturer has already factored the hitch weight into the calculation. With these systems, you will only need to ensure...
view full answer... - Recommended Weight Distribution System for a Trailer w/ a 485 lbs Tongue Weight Since your trailer's tongue weight is 485 lbs, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item # FA92-00-0600. This system works with tongue weights that range from 250 lbs - 600 lbs so it'll be perfect for your trailer. The Fastway e2 item # FA92-00-0600 has built in sway control that will keep your trailer in line with your tow vehicle when you're going down the highway and get passed by a semi or make a sudden move. This system includes a 2" shank that can...
view full answer... - Recommended Hitch and Wiring Harness for a 2023 Acura MDXTo add a hitch to your 2023 Acura MDX, I recommend the etrailer item # e27KR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a 900 lbs maximum tongue weight. I have linked an installation video below. Since you plan on towing a trailer with brakes you will also need a 7-way connector, a brake controller, and a ball mount kit. I have listed all of the parts you will need below...
view full answer... - Can 6K Equal-i-zer Weight Distribution Hitch Head be Used with 10K BarsSome weight distribution systems do allow you to interchange the bars with the head units but for your application the head of the 6K Equal-i-zer # EQ37060ET that you own is only rated for up to the 6K system so in order to use the 10K bars you need the whole 10K Equal-i-zer # EQ37101ET. The heads between these 2 kits do have the same mounting bolt hole pattern as the shank though so you'll be able to continue using the same shank.
view full answer... - Recommendation To Make Trailer Towing with a 2020 Kia Sorento Safer and More ComfortableI can help you to make towing safer and feel more comfortable with your 2020 Kia Sorento, but unfortunately we do not have anything which will allow you to increase your towing capacity or tongue weight. The Equal-i-zer Weight Distribution System # EQ37060ET will help to distribute the tongue weight across your Sorento and reduce rear end sag. This will make driving safer and more comfortable as you will not have that light steering feel or diminished braking from the light front end. It...
view full answer... - Parts Needed To Tow a 2011 Forest River R-Pod With a 2019 Toyota Highlander XLE I recommend installing the Curt Trailer Hitch Receiver # C13200 on your 2019 Toyota Highlander XLE. This is our only receiver rated for use with a weight distribution hitch which will make towing your 2011 Forest River R-Pod safer. For the electrical you will start with the Curt T-Connector # C56217. This will give you a 4-way flat which you will then connect to the 7-Way Upgrade Kit # ETBC7L. This kit will give you a 7-way along with the wiring for a charge line which will then allow...
view full answer... - Troubleshooting Sway on Trailer that Starts at 65 MPHIf you are getting persistent sway at 65 mph a weight distribution system will not be the correct solution. You most likely either have not enough tongue weight or a worn out suspension component that is causing the sway. Does it seem to be any different when you take out the sand bag? Is there any combination that allows the trailer to tow better like with or without water, or with or without the sandbags. Is the trailer sitting level when loaded? Sometime a nose high trailer will have...
view full answer... - Recommended Weight Distribution System for a 3,500 lbs Travel TrailerSince you are towing with a 2015 Toyota Sienna I strongly recommended using a weight distribution system. Weight distribution systems should be used when the trailer being towed weighs 50% or more of the vehicles weight. It looks like your 2014 Jayco Jay Feather 16 XRB has a gross weight of 3,500 lbs which means your tongue weight will be between 350 lbs and 525 lbs. I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item # EQ37060ET. This system has a tongue...
view full answer... - Availability of US Manufactured Weight Distribution SystemFor a weight distribution system that's manufactured in the USA, you'd want to go with an Equal-I-zer system. For a trailer with a fully loaded and ready to tow tongue weight (which includes weight of cargo stowed behind tow vehicle's rear axle) below 600 lbs, use # EQ37060ET. For a fully loaded and ready to tow trailer tongue weight of 600-1000 lbs, use # EQ37100ET. Both systems include the weight distributing shank, and the # EQ37060ET system includes a 2 inch trailer ball. The # EQ37100ET...
view full answer... - How Critical is Weight Distribution Rated Tongue Weight RangeThe Equal-i-zer Weight Distribution System # EQ37100ET operates effectively over a range of tongue weight (TW), from a low of 600-lbs up to 1000-lbs. The ideal situation is that your actual loaded trailer TW (along with the weight of any cargo in the Grand Cherokee that sits behind the rear axle) will fall near the middle of this range. If you were to carry a 100-lb cooler in the back of the GC, as an example, then that cargo weight would be added to your actual trailer TW, so 600-lbs would...
view full answer... - Weight Distribution System Needed for a 1972 Terry TrailerAlthough the actual round bars have similar dimensions between manufacturers, they all have different way that they connect to the specific manufacturer weight distribution (WD) head unit. If you know the brand name of your current system we may have a head unit that can be used with a longer shank for your application. Otherwise a new system is your best bet. To choose the correct WD system for your trailer you first need to calculate the total tongue weight (TTW). This is found by adding...
view full answer... - Recommended Weight Distribution and Sway Control for Sequoia Towing 3,626 Pound TrailerFor excellent sway control and weight distribution when towing your Viking Trailer with a 3,626 pound GVWR I highly recommend the Equal-i-zer Weight Distribution System # EQ37060ET. This system features integrated 4-Point Sway Control that does a great job of limiting any side-to-side movement during travel to allow for a really comfortable towing experience. I also like the clamp-on brackets that eliminate the need for drilling into the trailer at all during installation. This particular...
view full answer... - Brake Controller, Weight Distribution and Sway Control Recommendations for a 2005 VW TouaregI recommend the Tekonsha P2, # 90885. It is one of our highest rated and most popular brake controller models. If your 2005 VW Touareg has a factory tow package, then you will just need to connect the wires from the brake controller to the tow package wires under the dash. You will need to remove the lower appearance panel beneath the dash and to the right of the emergency brake pedal. The tow package wiring will be on the left, wrapped in grey foam. Connect the white wire on the brake...
view full answer... - Best Weight Distribution Hitch For Towing a 3,500LB Travel Trailer With a 2022 Honda PilotYou should definitely use a weight distribution hitch for towing a 3,500lb travel trailer with your 2022 Honda Pilot. A weight distribution hitch will help you in several areas. First it will help to keep the rear suspension of your Pilot from sagging due to having to much tongue weight being supported by the rear suspension. This will also help your steering feel as the vehicle will remain level and you won't get the light steering feel almost like the front end is coming off the ground. I...
view full answer... - Determining The Best Weight Distribution Hitch For A 2021 Hyundai PalisadeI would be happy to help! There are a multitude of different weight distribution hitches that will work with the etrailer Trailer Hitch Receiver # e95ZR you ordered for your 2021 Hyundai Palisade, but to find the correct option you will need to determine the total tongue weight of your setup. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your Palisade. Using a tongue weight scale like the etrailer...
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Updated by:
Dan D
Updated by:
Leah B
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Jim S
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Mike S
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Hayden R
Installed by:
Bradley B
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
10/2/2023
If you need a slightly bigger size ball mount, you can change out the two inch ball for the two and five sixteenths ball mount part # EQ91-00-6100. To swap them out, you would need part # ALL643216.