Replacement Socket for Equal-i-zer Weight Distribution Systems - 10,000 lbs GTW
(29 reviews)
Price: $50.50
In Stock
Replacement Socket for Equal-i-zer Weight Distribution Systems - 10,000 lbs GTW
Item # EQ90-03-1000
Our Price: $50.50
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (29)
- Q & A (0)
- Videos (1)
- Photos
Equal-i-zer Accessories and Parts - EQ90-03-1000
- Weight Distribution Hitch
- Hardware
- Socket
- Equal-i-zer
Replacement socket mounts in the head of your Equal-i-zer weight-distribution system and provides an attachment point for 1 spring bar rated at 1,000 lbs TW.
Features:
- Fits Equal-i-zer weight-distribution systems rated for 10,000 lbs GTW (1,000 lbs TW)
- Inserts into head assembly and provides attachment point for 1 spring bar
- Includes 1 socket
- Made in the USA
90-03-1000 Equalizer Replacement Socket - 10K
Video of Replacement Socket for Equal-i-zer Weight Distribution Systems - 10,000 lbs GTW
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Equal-i-zer Weight Distribution Hitch - Replacement Spring Bar Socket - EQ90-03-1000
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement socket for the 1000-pound tongue weight head on the Equal-i-zer Weight Distribution Systems. Now this part here will fit the Equal-i-zer Weight Distribution Systems that are rated for 10,000 pounds gross towing weight capacity and 1000 pounds tongue weight capacity. Basically, this will insert into the head assembly and provides an attaching point for your one spring bar. I just wanna pop up an insert to show you there's what this socket would look like when it's installed onto that head assembly. Now, I'll see the dimensions on this, the overall size of this is 2 inches by 2 inches.
The inside measurement is 1 3/8 inch by 1 3/8 inch and they have two different size pin holes. You can see on this end, there's a larger pin hole. This one, there's a smaller pin hole, the larger pin hole, it's gonna measure right at 5/8 of an inch and then the smaller pinhole is right at 1/2 of an inch. And this is for a quantity of one socket. But that should do it for the review on the replacement socket for the 1000-pound tongue weight head on the Equal-i-zer weight distribution system.
.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement Socket for Equal-i-zer Weight Distribution Systems - 10,000 lbs GTW - EQ90-03-1000
Average Customer Rating: 4.9 out of 5 stars (29 Customer Reviews)
Replacement socket mounts in the head of your Equal-i-zer weight-distribution system and provides an attachment point for 1 spring bar rated at 1,000 lbs TW.by: Brian 06/27/2023
This is a high wear point on the weight distribution system. I was happy to be able to replace them. Fit with no problems.
by: Karl 08/30/2023
Great product and great service from et railer.
by: Buzz 06/28/2023
Arrived fast, correct, and was able to install right away. Also good follow up service
by: Jim11/05/2022
This worked perfectly. The dealer incorrectly installed a non-equalizer tow ball, and when we made turns, it had started to crack the socket. I was able to replace the cracked socket with this, and have had no issues.
by: Gale 06/01/2023
Exact replacement, perfect fit.
by: Brad 08/18/2023
Perfect! Painted when I received them
by: Robert 07/19/2023
Great product
by: Matthew04/29/2020
Fits perfectly. Feels like better quality than what was on the hitch from factory.
by: John 06/20/2023
Exactly what I ordered.
by: Paul 10/30/2022
The replacement socket worked well.
by: David 09/20/2020
I discovered that my Equal-i-zer hitch had a cracked weight bar socket 5 days before leaving on a 3500 mile camping trip. I wasn’t able to secure a replacement socket from the manufacturer and none of the trailer hitch companies near me had the part in stock. My local RV dealer suggested I see if etrailer had it in stock. Thank goodness they had the part and with 3 day shipping I received the socket on time with enough time to paint and install it before our trip. Thanks etrailer for coming to our rescue.
by: Bruce08/03/2018
I bought these as a replacement if the sockets in my older equalizer hitch. Although I have not yet installed these, they seem heftier than my older sockets.
by: Nebraskan08/16/2016
Arrived on time as always with orders from etrailer. The fit is perfect.
Comments
Exact replacement part.
Nebraskan - 08/17/2017by: Ken03/04/2020
It’s well made, but doesn’t not come black as shown in picture. It’s unfinished so I’ll need to paint it. That’s after I remove the sticker that had the barcode on it and then probably use goo gone. Would have been nice if they used something else to tag the product in the warehouse that didn’t involved adhesive on a surface that needs to be painted. Otherwise, well made and will do the job
by: Hank H09/07/2019
Everything I ordered for my trailer hitch was perfect
by: Bert08/18/2019
100% as advertised. Prompt delivery. Have not installed yet. All measurements are correct and should be simple installation.
by: Kyle 10/11/2021
Was easy to order and arrived quickly. Only problem that I have is that it isn't black like the picture shows. Its unfinished steel and will need to be coated with something to keep it from rusting.
by: Gregory 11/18/2021
Great customer service. The sockets came quickly and look well built.
by: Matthew 11/08/2021
Came in raw metal. Good product just make sure you paint it before you install them.
by: Rick 10/28/2021
Got my parts a day earlier than expected. Perfect fit on the hitch.
by: Alfred 08/30/2021
Part fit perfectly.
by: Jon 09/27/2022
by: Dan 10/11/2021
excellent service...quality product
by: Paul 10/24/2022
by: Jeremy 09/21/2019
Always fast shipping. Great service.
25
29
Show More Reviews
See what our Experts say about this Equal-i-zer Accessories and Parts
- What is the Size of the Opening on the Replacement Socket for a Equal-I-zer WD SystemThe opening on the Replacement Sockets for Equal-I-zer Weight Distribution System, # EQ90-03-1000, measure just over 1-3/8 inches. The actual measurement of the opening is 1.380 inches which is very close to 1-3/8 inches.
view full answer... - Will I Need To Upgrade My 10,000LB Weight Distribution When Moving to a 900LB Tongue Weight Trailer?With your new Grand Design Reflection if the 900lbs of tongue weight is the shipping tongue weight you are going to want to upgrade your Reese weight distribution hitch. If you can let me know what model number hitch you have I can let you know the correct parts needed to upgrade your hitch. If your 900lbs is the loaded tongue weight you will be able to use your current hitch without issues. When trailer manufacturers give a tongue weight this is the shipping tongue weight. Once the dealer...
view full answer... - What is the Opening Size for Replacement Socket for Equal-i-zer 12K Weight Distribution SystemsI spoke with my contact at Equal-I-zer and the opening in the socket for the 1,200 pound systems, # EQ90-03-1200, is 1-1/2 inches. If you are measuring 1-3/8 inches then you have the 1,000 pound system and # EQ90-03-1000 is the proper replacement.
view full answer... - Are Sockets From Equal-i-zer Heads Interchangeable?I reached out to a representative of Equal-i-zer, who told me that the sockets from the 1,200 lb tongue weight head # EQ90-02-1200 will not fit in a 1,000 lb tongue weight head # EQ90-02-1000 because they are too big. If you need additional sockets for the 1,000 lb tongue weight head you would need replacements # EQ90-03-1000.
view full answer... - Replacement Bars for an Equalizer Hitch, 14,000 to 10,000 SolutionAt one point Equal-i-zer bars could be swapped easily to convert a kit to a higher/lower tongue weight range, but we now know that you have to replace the head of the unit with the bars. So with the bars part # EQ90-01-1099 that you need you will need to swap the head # EQ90-02-1000 in as well. Also if you are getting persistent sway try moving more weight of the trailer up to the front to increase the tongue weight as that typically is the easiest fix for sway.
view full answer... - How are Equal-i-zer Spring Bar Sockets Held to HeadThe sockets of the Equal-i-zer weight distribution heads like the part # EP90-02-1000 are bolted in place. Since you have a 1,000 lb kit the socket you'd need is part # EQ90-03-1000. Basically you'd need a large wrench and socket to remove the large bolt that runs through it so that you could pull it off and install the new one. If you inspect the head and find that it's also damaged I would highly recommend you replace it as well with the part # EP90-02-1000.
view full answer... - How To Upgrade from the 600 Lb to 1,000 Lb Equal-i-zer Weight Distribution SystemThe Replacement Socket for Equal-i-zer 1,000 Lb Weight Distribution Systems part # EQ90-03-1000 is larger than the Replacement Socket for Equal-i-zer 600 Lb Weight Distribution Systems part # EQ90-03-0600 therefore, it cannot be used with the Replacement Head for Equal-i-zer Weight Distribution Systems part # EQ90-02-0600. If you need to upgrade to the 1,000 lb system from the 600 lb system then you will need the Replacement Head for Equal-i-zer Weight Distribution Systems part # EQ90-02-1000...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Dan D
Updated by:
Shelly K
Updated by:
Wilson B
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.