2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
(147 reviews)
Price: $28.52
In Stock
2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
Item # EQ91-00-6080
Our Price: $28.52
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (147)
- Q & A (0)
- Videos (1)
- Photos
- Used (1)
- Why etrailer?
Equal-i-zer Trailer Hitch Ball - EQ91-00-6080
- Trailer Hitch Ball
- 2 Inch Diameter Ball
- 1-1/4 Inch Diameter Shank
- Standard Ball
- 8000 lbs GTW
- Class IV
- Class V
- Chrome-Plated Steel
- 2-1/4 Inch Shank Length
- Equal-i-zer
This sturdy steel, double-chrome-plated hitch ball is designed for use with Equal-i-zer weight-distribution systems. Features 2-1/4" long x 1-1/4" diameter shank and 8,000-lb maximum GTW rating.
Features:
- Trailer hitch ball is designed for use with Equal-i-zer weight-distribution systems
- Sturdy steel construction
- Durable, rust-resistant double chrome plating
- Lock washer and nut included
Specs:
- Ball diameter: 2"
- Shank dimensions: 2-1/4" long x 1-1/4" diameter
- Weight capacity: 8,000 lbs
- 2-Year warranty
91-00-6080 Equalizer Standard Weight-Distribution Hitch Ball - 2" - 8,000 lbs
Video of 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Equal-i-zer Trailer Hitch Ball - Trailer Hitch Ball - EQ91-00-6080
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this two-inch hitch ball for the Equalizer Weight Distribution Systems. This has an 8,000 pound weight capacity. Now this trailer hitch ball's designed for use on the Equalizer Weight Distribution Systems. Basically this ball will attach to your weight distribution head. It is a sturdy steel construction.
And then you can see it has a nice durable, rust-resistant, double chrome plating to it. Also, if you notice the lock washer and the nut for installing it is all included. Put your washer on, then go ahead and put your nut on and tighten that down for it to the correct specs. Again, this is a two-inch diameter. Weight capacity which will be stamped on the top of the ball is 8,000 pounds.
And a few measurements on this. We're gonna measure the shank dimensions. So if we do the overall length of the shank is right at two and a quarter inches long. And the diameter of it is right at one and a quarter inches. But that should do it for the review on this two-inch hitch ball for your Equalizer Weight Distribution Systems with the 8,000 pound weight capacity..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Defective
- Arrived Damaged
Customer Reviews
2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs - EQ91-00-6080
Average Customer Rating: 4.9 out of 5 stars (147 Customer Reviews)
This sturdy steel, double-chrome-plated hitch ball is designed for use with Equal-i-zer weight-distribution systems. Features 2-1/4" long x 1-1/4" diameter shank and 8,000-lb maximum GTW rating.by: Stacey 06/09/2021
Needed this for my trailer. Came timely. All is good.
Comments
Great product.
Stacey - 10/31/2022by: Kyle 09/06/2022
great fit and shipped fast!
by: Mark11/25/2017
I needed a 2" ball with a 11/4" shank for my Equal-I-zer hitch. It has a 8,000 lb. towing capacity, perfect for hauling my Jeep to Jeep playgrounds.
This product was easy to find and order at etrailer.com. Their follow through with my order a tracking is one of best, thanks George J.
Comments
Great, with no issues.
Mark - 12/13/2018by: Robert 07/29/2022
Great Company
by: Jeff S.09/14/2017
I ordered a ball hitch, ball, trailer wiring harness and 1 7/8" socket. The customer service was outstanding. I mentioned that I needed my order quickly. The rep I worked with researched and found one of the items I ordered was out of stock and would delay the shipment. The rep helped me rework the order and gave special attention to making sure this was done with minimal price increase. She really went the extra mile. The next day I decided I wanted to add on a wiring tester. This meant cancelling and re-booking the order. The rep, a different one this time, took special care to get everything right and make sure I didn't lose any of the items prior to cancelling the original order. The order came very quickly - and that was with free shipping - and the quality of the items is excellent. I only have two concerns with the order. 1) Be wary of installing the ball on the ball hitch. For the ball I ordered, the manufacturer requires 430 lb. ft. of torque. You will likely have a difficult time finding a torque wrench that handles over 300 lb. ft. If you do find one, plan on forking out several hundred dollars for it. You will either have to improvise or find a mechanic who is also likely to improvise as they may not have the proper equipment. This is the one thing I didn't plan for. 2) By no fault of the reps, they had to cancel then re-book the order just to add a $5 item. That points to a very cumbersome order taking system. It adds a lot of unnecessary hassle and may introduce errors into the order. Having said this, the positive of this experience far outweighs the two negative points.
by: Keith F.08/30/2017
Figured out on Saturday what type of anti-sway hitch I needed to order, receive and install by Wednesday night. Tried another site, they couldn't meet the deadline, turned to google and discovered etrailer. Called at 1 PM on Saturday and talked to Steve Z, he got the order placed, and promised to check the status and follow up with me on Sunday. Everything was delivered on Tuesday and that night the hitch was installed, a day ahead of schedule.
I don't expect to have a high need for towing / trailering, but when I do I'll be checking and calling etrailer first. On a scale of 1 to 10 their customer service is a 15.
by: Tom F08/02/2017
Requires a 1-7/8 inch THIN WALL socket to install on a weight distribution hitch.
by: Dana06/12/2019
Great quality, fast delivery and reasonable price. The representative I talked with was very knowledgeable. I'm glad I but both this and the anti-sway trailer set up from etrailer!
by: James 08/29/2021
Good quality, good price and fast shipp ing.
by: Deborah 10/01/2019
Exactly what we needed and delivery was very fast!! Camping Wild couldn’t get us a 2” ball in was back ordered for weeks. Ordered from here and was delivered within 2 days of ordering. Called customer service and everyone was extremely nice!
by: Edward 08/10/2020
The new ball is perfect, I had trouble finding a wrench to remove the the original ball from the ball mount. Once I got the proper sized wrench everything went smoothly.
by: Jj05/30/2021
Works great easy to install
by: Bill B03/04/2017
As usual, this product came well packaged, in perfect condition and very quickly. It is a pleasure to work trainer. Thanks for being there. Bill
by: Charles03/22/2018
It’s a socket. It works.
by: vws05/16/2017
This is a quality product.
by: Dennis 08/19/2022
by: eddie b05/04/2017
rose was professional and polite
by: Robert04/18/2018
Just like OEM PRODUCT,WORKE PERFECTLY < br>
by: Robert04/18/2018
Just like OEM PRODUCT,WORKE PERFECTLY < br>
by: William 12/07/2021
by: Joseph 07/18/2022
by: Ward04/07/2017
Excellent
by: David 08/27/2021
by: Doug Toms10/28/2012
Product as described. Great service.
by: James 10/20/2021
25
147
Show More Reviews
See what our Experts say about this Equal-i-zer Trailer Hitch Ball
- 2 Inch Hitch Ball Recommendation for Equalizer Weight Distribution SystemFor a 2 inch hitch ball that fits the Equalizer Weight Distribution systems we have the part # EQ91-00-6080. You should note that this has an 8,000 lb trailer weight capacity though.
view full answer... - Base of Flange to Top of Ball Dimension on Equal-i-zer Weight Distribution Ball EQ91-00-6080I was able to go out to our warehouse and measure this for you. I found that from the flange to the top of the ball platform is 3.033 inches. I have linked an image of this measurement for your convenience.
view full answer...
- Replacement 2" Ball Mount For Equal-i-zer HitchThe 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs, part # EQ91-00-6080, is a 2" ball mount that is compatible with your Equal-i-zer weight distribution hitch. This ball mount was designed specifically for the Equal-i-zer weight distribution system. I have included a product description and a video demo link below.
view full answer... - Does the Weight of the Weight Distribution System Count as Tongue Weight When Picking Out WD SystemThis is a very good question, but you do not need to count the weight distribution system as added tongue weight when you use it. We have had several weight distribution manufacturers come out and specify this. To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. I...
view full answer... - Recommended Weight Distribution/Sway Control System for 19 Foot 3000 lb Lightweight Travel TrailerBecause a travel trailer has a lot of surface area for crosswinds and traffic caused turbulence to act against, I'd highly recommend using a weight distribution system that provides an incorporated sway control component. To choose the proper system, you'll need to know the tongue weight of the travel trailer when it's fully loaded and ready to go. Anything packed in the truck bed behind the rear axle ALSO needs to be considered as tongue weight. Assuming that the 350 lb figure you mentioned...
view full answer... - Best Weight Distribution System with Sway Control for a Gulfstream Vintage Cruiser 19ERDFor your Gulfstream Vintage Cruiser 19ERD, I recommend using the Equal-i-zer Weight Distribution System part # EQ37060ET which is rated for a total tongue weight of 200 lbs - 600 lbs. The total tongue weight is the tongue weight of the loaded and ready to tow trailer added to any cargo stored behind the rear axle of the tow vehicle. The Equal-i-zer Weight Distribution System is considered to be one of the best systems on the maret. It has a four point sway control system which is unlike...
view full answer... - Weight Distribution System Recommendation for a 2012 Nissan Armada Towing a 2017 R-Pod 176TThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. The Reese system the dealer is pushing...
view full answer... - Recommended Socket to Install a Ball on a Fastway e2 HitchTo install a ball, like the Equal-i-zer # EQ91-00-6080, you will need a 1 7/8 inch socket that uses a 3/4 inch drive. The Equal-i-zer Thin Walled Socket # EQ70-00-4800 is ideally suited for this application. The torque rating on the ball will also be the same between round bar and trunnion bar systems and will depend on the specifications listed from the manufacturer. This will be the socket I suggest for both a round bar and trunnion bar weight distribution systems as well.
view full answer... - Recommendation for an Equal-i-zer Weight Distribution and Sway Control With a 700 lbs Tongue WeightThe Equal-i-zer Weight Distribution System w/ 4-Point Sway Control, # EQ37100ET, would be the correct model weight distribution system needed is your loaded tongue weight will be about 700 lbs. The system is rated up to 1,000 lbs, so there will be some room for you if you decided to carry cargo at the rear of your vehicle behind the rear wheels. Any cargo loaded behind the rear wheels will have to be figured in to your total tongue weight. The Equal-i-zer system includes a 2-5/16 inch...
view full answer... - Availability of 2 inch Hitch Ball for Equal-I-Zer Weight Distribution SystemYes, Equal-I-Zer actually makes a 2 inch hitch ball for use with their weight distribution systems which is part # EQ91-00-6080. This would work well with the part # EQ37060ET if that is the kit you have.
view full answer... - Can the Equal-i-zer 10K Be Used On a 5K Trailer If Upgrading SoonI have spoken with Equal-i-zer in the past and they have said that you can go with the larger system (to an extend) in light of upgrading the trailer down the line without any adverse side affects. Therefore, the Equal-i-zer Weight Distribution System part # EQ37100ET would work well for you. The advantage is that you can upgrade when needed without replacing parts not necessarily that the higher rated system will work better. Please note, the above Equal-i-zer Weight Distribution System...
view full answer... - Can 2 inch Hitch Ball Fit Blue Ox SwayPro part # BXW2000Yes, a 2 inch hitch ball with a 1-1/4 inch diameter shank like the part # EQ91-00-6080 would fit the head of the Blue Ox SwayPro part # BXW2000.
view full answer... - Recommended Weight Distribution With Sway Control For 2008 GMC Yukon Towing CamperSince you are towing a camper that weighs nearly as much as your Yukon I recommend installing a weight distribution system with sway control. To find the right system for you, you will need to know the total tongue weight of your camper when it is loaded and ready to tow added to the weight of any cargo you place behind the rear axle of your Yukon. You may find that you have an additional 200 to 250 lbs of cargo. The system I recommend is the Fastway e2 Weight Distribution, part # FA92-00-0800....
view full answer... - Weight Distribution Recommendation for 3,700 lb Travel TrailerWe have not had any issues with weight distribution systems bending trailer frames. If your trailer happens to have an aluminum frame that could be an issue though. You would need to check with the trailer manufacturer if the frame is aluminum to see if that would still be recommended. If your travel trailer weighed 3,700 lbs the tongue weight would be between 370 and 555 lbs. The FastWay E2 part # FA94-00-0800 would be perfect for that tongue weight range. Especially if you consider the...
view full answer... - Recommended Weight Distribution With Sway Control For 1993 Bigfoot TrailerThe weight distribution system I recommend for your trailer is the Fastway e2, part # FA92-00-0600. This trunnion system has sway control built in and is designed for tongue weights between 250 and 600-lbs. You will need a hitch ball for this WD system. for a 2-5/16 inch ball I recommend part # EQ91-00-6100, and for a 2-inch ball use part # EQ91-00-6080.
view full answer... - Weight Distribution System For Trailer Being Towed By Two Different VehiclesWeight distribution is recommended when your fully-loaded ready-to-tow trailer weighs more than half of your towing vehicle weight. Another reason is when the tail lights are pointed upward or the rear end of the towing vehicle is sagging. One method for determining the tongue weight is to use a scale like part # 5780. This is the Sherline tongue weight scale and it has a 2,000-lb capacity. As you add weight to your trailer like a generator or potable water, it will depend where the...
view full answer... - Recommended Weight Distribution For Trailer With 600-Lb Tongue WeightThe best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls near the middle of the tongue weight range for the system. Getting a system that is too small will be useless, but getting a system that is too big...
view full answer... - Weight Distribution Recommendation for R-Pod Trailer with 500 lbs of Tongue WeightThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. The Fastway e2 part # FA94-00-0600...
view full answer... - Recommended Weight Distribution With Sway Control For 3,800-Lb Tent TrailerThe trailer hitch is not considered for tongue weight when calculating total tongue weight. You do need to know the total tongue weight which is the tongue weight of your trailer when it is loaded and ready to tow added to the weight of cargo placed behind the rear axle. The 280-lbs you said is your tongue weight sounds a little light. I would expect the weight to be closer to 400-lbs for a 3,800-lb trailer unless most of the weight is in the back of the trailer. Based on the numbers you...
view full answer... - Can a Weight Distribution System Be Used On a 2013 Toyota HighlanderI checked the owner's manual for a 2013 Toyota Highlander just to be sure and there is no mention of not using a weight distribution system so you are covered. In fact, it is even somewhat encouraged as the manual states the use of a sway control device which most weight distribution systems have is needed for trailer's over 2,000 lbs. There is some truth to uni-bodies having a weaker structure than body-on-frame configurations but not so much so that you cannot use a weight distribution...
view full answer... - Is a Weight Distribution System Needed for a KZ Sportsmen S240FBThe use of a weight distribution system and or sway control device is rarely required but the reason you see them used so much is because they just make the towing experience that much better. The use of a weight distribution system will give you more stopping power, help improve the life of your tow vehicle's suspension, improve stability while towing, and reduce/prevent trailer sway among many other things. That said, the rule we use for whether or not a weight distribution system should...
view full answer... - Recommend Weight Distribution Hitch for Trailer with 400 lb Tongue Weight Multiple Tow VehiclesI have great news for you. We have several weight distribution systems available that can be used on both trucks and suvs. The reason for this is because a weight distribution system is based off of the trailer rather than the tow vehicle. I recommend the Fastway e2 Weight Distribution System part # FA92-00-0800 which is rated for a tongue weight range of 400 - 800 lbs. That said, if you decide to tow an even heavier trailer with your truck for example you can purchase another set of spring...
view full answer... - Economical Weight Distribution and Sway Control for 400 lb Tongue WeightA weight distribution with sway control is an excellent idea, and thank you for the tongue weight numbers as it is really helpful to get the right part, though the system you mentioned is weight distribution only, and doesn't include a sway control component so we'll need to take a look at a better option. The Pro Series is a more economical, budget-friendly system, and there are similar ones that will provide you with sway control, and I highly recommend the Fastway e2 Weight Distribution...
view full answer... - Weight Distribution Hitch for Light R-Pod Travel TrailerVery good question, and we do have a solution for a weight distribution hitch for a very light R-Pod travel trailer. For a 2,800 lb dry weight R-Pod with a GVWR in the 3,5000 lb - 4,000 lb range the best option for a weight distribution hitch is the Fastway e2 because it is the best value. It combines quality with ease of use, superb sway control, and a price tag much less expensive relative to other systems. The Fastway that is perfect for your very light R-Pod is the Fastway e2 Weight...
view full answer...
Do you have a question about this Trailer Hitch Ball?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hitch ball information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Updated by:
Dan D
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.