Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side
(141 reviews)
Price: $41.24
In Stock
Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side
Item # RVSTLB60
Our Price: $41.24
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (141)
- Q & A (0)
- Photos
Optronics Trailer Lights - RVSTLB60
- Tail Lights
- LED Light
- Red
- 8-11/16L x 3-3/16W Inch
- Rear Reflector
- Stop/Turn/Tail
- Non-Submersible Lights
- Optronics
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail.
Features:
- Low-profile RV tail light serves 3 functions
- Stop, turn, and tail light
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable black ABS plastic base and snap-on lens
- Red lens over white LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - hardware not included
- 3-Wire pigtail
- White wire for ground
- Black wire for tail light
- Green wire for stop/turn signal light
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
Specs:
- Configuration: passenger side
- Driver side: RVSTLB61 (sold separately)
- Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" deep
- Diodes: 9
- Power draw at 12.8V:
- Stop/turn: 0.243 amps
- Tail: 0.046 amps
- Lifetime warranty on LEDs
RVSTLB60 Optronics Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Red Lens - Passenger Side - Right Hand
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side - RVSTLB60
Average Customer Rating: 4.8 out of 5 stars (141 Customer Reviews)
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail.by: Brent 11/13/2023
Installed about 1 year ago, still working fine. These were an exact match replacement for my older taillights. I like the LED and no longer need to replace bulbs.
by: Jack mehoff02/25/2024
Well built, easy installation. Nice LED upgrade to my trailer
by: Chad 02/27/2024
Easy replacement.
by: Mary Ellen08/01/2023
Fast service. I called to get more information on which taillight to order and customer service answered my phone call right away and answered my question! I have used etrailer before for parts and will continue using them.
by: Lee01/10/2023
so far, working great
by: Roger 08/01/2023
Much brighter and easier to see than standard bulb lights. Direct replacement for my original taillights.
by: Jerry H09/15/2023
The L.E.D. taillights were delivered quickly and work perfectly.
by: Walter 02/21/2024
Service was great Product info was accurate. Thank you for your quick response.
by: Jeffery 08/10/2023
The lights were very easy to install, and the LED lights were exactly what I was looking for to provide the bright light.
by: Jonathan 07/22/2023
Look just like my original incandescent lights, but brighter. Very easy install. Just be gentle snapping the lenses on.
by: Greg03/28/2023
Its a great tail light with the exception of the locking tabs to keep the lens attached are weak. Due to these weak tabs I have used a adhesive tape around the perimeter of the lens seal to assure the lens doesn't fall off
by: Dennis 12/19/2023
They work very well.
by: James L12/24/2022
Ordered a hitch pin and 2 led tail light assemblies. Came in one box Christmas eve, sst hitch pin had 2 layers of padding but the 2 tail lights were loose in the box with no wrapping or packaging. One lens has a chunk broken off and other has a gash across the lens.
Have requested replacements but probably wont hear back until after holidays. Very surprised the tail lights were loose with no label or mounting screws or instructions or blister pack.
by: James04/25/2019
I bought these LED taillights to replace a set of incandecent style taillights that were having issues. My 2017 Wildcat was almost entirely running LED style lights both inside and out except for the taillights, so I decided to install LED taillights rather than troubleshoot these original taillights. I did find a problem with the way that the factory had wired my taillights during the process. The factory had the brake/turning signal wiring and taillight wiring reversed, which was not noticable with the incandescent style lights, but was very apparent with the newer LED lights. Once wired correctly these LED taillights really out shine the original taillights and I'm very happy with them in general and would buy them again.
James H.
4/26/2020
These tail lights are still working well after a year. My only complaint is I wish they were as big as the ones I removed. The new ones are shorter then my old lights, so two of the older screw holes are now visible. I sealed them with clear RTV sealant, but I still see them. I couldnt find any LED style taillights as big as my older ones.
by: Grant N01/15/2017
I replaced all the clearance lights and taillights on our fifth wheel camper with these OE style LED versions. They are much brighter and therefore much safer, especially in the case of the tail/brake/turn lights seen elsewhere at etrailer. They should last a lot longer than the original bulb units. I also like the way they look as compared to the old bulb style. Our camper was only a year old, and I don't understand why they all wouldn't come from the factory with LEDs. I installed them all myself without issue.
Grant N.
1/22/2018
Thank you for your follow up. I am still happy with my purchase,although they are installed on a fifth wheel camper trailer that doesnt getused a lot and usually in the daylight hours, so the lights havent got alot of hours on them. So far, so good. Thanks again.
by: Keith I.06/01/2020
I purchased these LED taillights as a direct replacement for the stock incandescent fixtures that our 2019 Aliner Ranger 12 came with. I wanted to upgrade to LED for greater visibility and reliability. These were a win on both counts. The best part was that I didn't have to drill any new holes to mount them as the fixture housings are identical.
Keith I.
6/2/2021
The lights are still working great! Very happy.
by: Brendan 08/05/2020
Product worked perfectly. Much brighter than original bulb type, and super easy to install. Don't forget that your trailer wire coloring, and standard wire coloring are not the same. Pay attention to original wiring before you cut replace old light kit.
Brendan
8/6/2021
Still bright and working perfectly. I would suggest to anyone with a new or old rig to update to the LED version.
by: Rich in South Florida08/04/2021
The original incandescent bulbs on my 16ft KZ Sportsmen weren't very bright in the South Florida Sun. The new lights were a great match in terms of size, the installation instructions were clear and daytime visibility of turning and braking has greatly improved. No problems with leaking or fading one year after.
Rich F.
8/5/2022
Two years later the lights are still functioning properly. No dimming, fading, cracking or leaks despite being stored outside in the South Florida sun.
by: Charles 12/08/2021
Easy installation & matches original pr oduct.
Charles
12/9/2022
Product performing like it did when new.
by: Brandon H.02/01/2020
Oh baby, what a huge improvement and upgrade from our original factory 2018 Grand Design Reflection 5th wheel brake & tail lights. These new LED lights are brighter, safer and add a large measure of confidence when I am towing. The swap out project was easy & I used the heat shrink wire connectors for added connection strength & waterproofing. I really think RV manufacturers should all move to the LED lights. They really do make a big difference! Also, check out the LED RV marker lights that etrailer sells. They are a good investment. We are glade we did these LED light upgrades when we did, even though our RV is fairly new. Big safety advantage.
by: Bob S.09/26/2017
Very satisfied with this LED for the passenger's side of my 5th wheel. Looks way more finished than original lights were and much much brighter!!!! Thank you again!
Bob S.
10/1/2018
Perfect still. Very happy with these products, thanks again!!
by: Ron 07/21/2020
I had a wanted to install a quick and easy LED system for my existing fifth wheel halogen taillights. It was a pretty simple task and we love them!
Ron
7/22/2021
Awesome, much better to see than the OEM halogen lights.
by: Tom in WA07/31/2016
I ordered both driver and passenger side LED tail lights to replace the stock ones which were not working, on my travel trailer. I was sad to see that when they arrived via 2nd day shipping (Wife and I going on vacation the next day)that the drivers side was not LED :( Not wanting to cancel my vacation I installed what I was shipped and emailed etrailer what had occurred. They ended up shipping the right one in several weeks for free. Great customer service . Thanks etrailer
by: John02/01/2023
It arrived on time without any damage. It was a direct replacement that was completed without any problems. I would buy again.
by: ejoc4201/31/2017
Replaced OEM incandescent tail lights in a Signature Ultra Lite trailer. The directionals in original lights were barely visible in daylight. the LED replacements are easily seen in sunlight and are exceptional at night. The upgrade was like for like, same screwholes and even used rubber gasket from originals. All in all very satisfied with product and ease of changeover
25
141
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Optronics Low Profile LED RV Tail Light Wire GaugeThe Low Profile LED RV Tail Light # RVSTLB60 uses 20 gauge wire.
view full answer... - Replacement Taillight Base for 2015 Coachmen Freedom ExpressThe brackets are part of the taillight assembly and only available as an assembly. For the Passenger Side Taillight # RVSTLB60 will be the taillight assembly. I do ask that you confirm the dimensions of the base as 8-5/8" x 3-3/16" rectangle. If that is correct the Driver Side Taillight is # RVSTLB61. If your lights are a different size, let me know and I will help you find the correct size.
view full answer... - Recommended LED Trailer Lights to Replace Incandescent LightsI may have some replacement LED lights for your trailer but none of the 8-1/2 by 4-1/2 inch lights we carry are LEDs. The Low Profile LED RV Tail Light # RVSTLB61 for the driver's side and # RVSTLB60 for the passenger's side might work for you.
view full answer... - Driver And Passenger Side Low Profile LED RV Tail LightI can help you out here as we do have both the driver side and passenger Low Profile LED RV Tail Light. The matching passenger side has 9 diodes though because it does not have bulbs to light up the license plate. The two matching lights are the following: - Driver Side: Low Profile LED RV Tail Light with License Bracket # RVSTLB61 - Passenger Side: Low Profile LED RV Tail Light # RVSTLB60
view full answer... - Solution for Needing Replacement Lens for Trailer Taillight SAE AISTO1Since the lens you'd need part number AST50B is no longer available you'd need an all new assembly which for that the best option is the part # RVST50 since you'd basically only be using it for just the lens as this is the most cost effective solution we have.
view full answer... - What Is The Lumen Output For The Optronics RVSTLB61 And RVSTLB60Hello Berry. The light readings for the # RVSTLB60 are on the tail 701 / 296 and the candela is 7.8. On the stop is 706 / 293 and the candela is 97.4. The light readings for the # RVSTLB61 are on the tail 702 / 287 and the candela is 7.6. On the stop is 708 / 291 and the candela is 96.8. Between the other stop, turn, tail lights in this size there is not really any significant differences in lumen output. I recommend sticking with the optronics lights. They are known to be great quality...
view full answer... - Comparison Of RVSTLB0060 And RVSTLB60 Trailer LightsThere are only a couple differences between the # RVSTLB60 and # RVSTLB0060 trailer lights. The # RVSTLB0060 features a ONE Series LED light which is brighter than traditional LED lights. The light measures 8-5/8 inches long. The # RVSTLB60 has 9 LED lights and it measures 6-11/16 inches long. Both lights measure 3-3/16 inches wide and 2-1/4 inches deep, and they have snap-on lenses and use a 3-wire pigtail.
view full answer... - Replacement Brake Light Lens for a 2012 Aliner Ranger 7859Thanks for reaching out, Jessica! In the past we've had a replacement lens for the brake lights on an Aliner trailer, but those lens have been discontinued so the best option for you is to completely replace the light assemblies and for that I recommend the following from Optronics: - Driver Side # RVSTLB61 - Passenger Side # RVSTLB60 These measure 8-11/16" long x 3-3/16" tall x 2-1/8" deep and are pretty standard for trailers. We don't have a cover for your AC unit, and we also don't...
view full answer... - How To Choose Correct Replacement Trailer Tail Lights for Grand Design Imagine MK2670I do have some options for you as we carry a wide selection of trailer lights but we aren't able to look up what lights any one particular trailer uses as there is no record of this. The best way to find a replacement light for your trailer would be to take some notes of the type (clearance/tail/etc.), size (dimensions), shape (round/square/etc.), and color (red/amber). I have then attached our selection of lights below you can look through and filter using the above info. The Low Profile...
view full answer... - Replacement Taillights for 2000 Jayco Eagle CamperI do have an option for you but the wraparound style taillights on a 2000 Jayco Eagle Camper are no longer available therefore your only options for replacement are changing to a different style like the Low Profile LED RV Tail Light part # RVSTLB60 for passenger or part # RVSTLB61 for driver which is what I recommend. These lights are LEDs so they will burn brighter and pull less power than the old incandescent. Unfortunately, you'll need to modify the mounting and wiring to make them...
view full answer...
- Correct Part Number for Driver and Passenger Side of Low Profile LED RV Tail LightThe Low Profile LED RV Tail Light is available for the driver side as part # RVSTLB61 and the passenger side as part # RVSTLB60.
view full answer... - How to Determine Correct Replacement LED Tail Lights on 2017 Grand Design Imagine 2600RBYou can go to LED lights on your 2017 Grand Design Imagine 2600RB, but we don't have any way of knowing what lights are currently on your trailer, so you'll just need to do some measuring to determine what will work. For example, the Low Profile LED RV Tail Light w/ License Bracket - Driver Side # RVSTLB61 and Passenger Side # RVSTLB60 measure 8-11/16" long x 3-3/16" wide x 2-1/8" deep and are surface-mounted lights. If yours are of similar measurements you can use them as replacements....
view full answer... - How to Determine Tail Light Replacement for Rockwood TrailerThank you for the photo, and though we have tail lights that will work for you there is unfortunately no database with each part number for each year, make and model of trailer that would allow us to look up what you might have. Instead, you will need to take a measurement to find a matching light although based on your photo we do have one which looks very similar, the LED RV Tail Light w/ License Bracket - Driver Side # RVSTLB61. This light measures 8-11/16" long x 3-3/16" wide x 2-1/8"...
view full answer...
- Replacement Taillight for Fifth Wheel that Has Raised Center SectionHit reply to this with the picture and I'll take a look and see if we have it.
view full answer...
- Replacement Passenger & Driver Tail Lights For A 2018 Heartland RV Pioneer Travel TrailerI went ahead and checked out what we have for your 2018 Heartland RV Pioneer Travel Trailer, and the closest I was able to find is the: -Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes # RVSTLB60 for the passenger side, & the, -Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 for the driver side. These lights measure 8-11/16" long and 3-3/16" wide.
view full answer... - How to Figure Out Correct Replacement Taillight For 2019 Forest River Grey Wolf 27DBHSince there is no type of cross reference available for taillights on RVs like your 2019 Forest River Grey Wolf 27DBH, in order to figure out how the correct replacement taillight, you will simply need to measure your taillight, which will determine the correct replacement. Based on some photos I saw, it looks like you may have an Optronics light that measures 8-11/16" long x 3-3/16" tall: - Driver Side: Low Profile LED RV Tail Light with License Bracket # RVSTLB61 - Passenger Side:...
view full answer... - Recommended LED Lights for 5th Wheel TrailerFor the best results I recommend going with all-new LED assemblies for your Grand Design Reflection 5th wheel. While replacement bulbs are an option, you are better off going with a new assembly made specifically to optimize LED lights. Additionally, the LEDs on new assemblies have a lifetime warranty while replacement bulbs have just a 1-year warranty. In terms of brightness levels, brake lights on all vehicles are going to be the brightest because they alert the motorist behind them...
view full answer... - Replacement Tail Lights for Older Jayco Eagle Pop-Up CamperI do have an option for you but the factory tail lights on an older Jayco Eagle Pop-Up wraparound to the outside of the trailer and none of the aftermarket replacement will have this feature. That said, you could pretty easily replace them with some surface mount lights like the Low Profile LED RV Tail Light part # RVSTLB61 for driver and part # RVSTLB60 for passenger. It should be pretty easy to make the swap, you will likely need to drill new holes to secure the light and open up the...
view full answer... - LED Tail Light Upgrade for Optronics RVSTB60To replace/upgrade your RV Tail Light (Stop, Tail, Turn), # RVSTB60 to an LED light, the Low Profile LED RV Tail Light, part # RVSTLB60 would serve as a direct replacement. That's just the passenger side though, so you'll also need the driver side, part # RVSTLB61. These feature the same 3-Wire pigtail so they will wire into your RV exactly as the old ones were and will last 50 times longer, while shining brighter light with minimal draw.
view full answer... - Replacement LED Tail Lights For a 2021 Coachmen Catalina Legacy 243RBS Travel TrailerWe have the Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 and the Low Profile LED RV Tail Light # RVSTLB60.These are the same as the Tail Light # RVSTB60 with LED's instead of an incandescent bulb.
view full answer... - LED Trailer Tail Lights with a Black BaseFor a black base you can use # RVSTLB60 for the right side of the trailer. For the left side of the trailer use # RVSTLB61.
view full answer... - Do SAE Numbers Indicate Tail Light Lens Replacement for RVSTLB60That's a good question but the SAE number on a light just stands for "Society of Automotive Engineers" and isn't indicative of the exact part. It just means that it has passed their guidelines. The correct replacement lens for the Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side # RVSTLB60 is Replacement Lens # AST60B. Replacement lenses are specific to the light so if you aren't sure what you have you may want to replace the light altogether,...
view full answer... - Replacement Tail Light Options for 2016 Coleman Lantern Travel TrailerIt sounds like you are looking for a replacement passenger side tail light for your 2016 Coleman Lantern 274bh trailer by Dutchmen. If that is the case, we have exactly what you are looking for! From my research, it looks like those trailers came with incandescent lights, but could've been upgraded to LED, so I'll give you both options. For an incandescent light, you will want part # RVSTB60. For an LED light, you will want part # RVSTLB60 We also have the drivers side lights if you'd...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Amy B
Updated by:
Brian T
Written by:
Laura H
Video by:
Dustin K
Video Edited:
Chris R
Installed by:
Hayden R
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Lee
1/12/2024
Still working great