4" x 2-1/6" Oval. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (103 Customer Reviews)
4" x 2-1/6" Oval. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
Easy install and bright marker light. I also used two on the top back side of my horse trailer as an extra turn signal and brake light. My existing turn signal and brake lights were really low on the trailer and these helped it become more visible when I was slowing down or turning.
Everything is good package arrived on time and lights are in good condition
I used this side marker to replace existing Bargman 99 series lights on a camping trailer. The Optronics LED model was not quite as bright as I would expect for a 6 diode unit, but still an improvement over the incandescent model. It is larger in size than the Bargman 99 series, so it covers up any surface imperfections on the trailer.
great products!!!
I think the product is exactly what I wanted. Now I have to check them out by installing them on my motor home. You have made my job easier as it matches the burned our units. Thanks again, These replace the clearance light on a 1990 Fleetwood motor home.
I ordered some of these previously after a few years of fighting with incandescent bulbs in the trailer marker lights. These LED units are much brighter and will last many times longer than the incandescent units. In my initial order, I had somehow managed to miscount how many I needed, so this order is to replace the last few of the old style markers & bulbs still remaining.
I think the product is exactly what I wanted. Now I have to check them out by installing them on my motor home. You have made my job easier as it matches the burned our units. Thanks again,
Lights work great, very bright. Easy wire connect and mounting was a breeze.
I have made several purchases with etrailer and all have them have been right on the mark. Order form easy to use, delivery on time and always a decent product and follow up. I won't be shopping around in the future.... direct to etrailer and "git er done".
These are good lights with pretty secure covers. They work great and bolt up exactly where the old ones did. The only issue I saw was that the wires can easily get pinched when mounting these on a surface with a center hole. These seem to be designed for the wires to be routed out of the side or bottom of the light, not the back. No biggie though.
I use this product for an inside shipping dock so the truck drivers can see better when backing into the dark dock. These work well. However I was disappointed in how they were shipped, they were just tossed into a box with some kraft paper and sealed. A few of them were scuffed and scraped. I can accept this for the price I paid and the free shipping.
Exactly what was needed
A good light, but there are issues.The LED's emit a yellow light, not white. While the lens is red, it gives the light is almost an umber color and not quite as intense. The potential for a discussion on the color when lit is there. The mounting holes are positioned too close to the center LED compartment to accept hex hex head tapping screws. It's do able but difficult. The light itself is well made with all components includind the 20 guage aluminum wire encased in resin.
What a great product Not only the lens is read the LED lights are red as well and extremely bright works amazing
This is exactly what we wanted to replace the old incandescent trailer markers. We can always count on etrailer to have what we need in stock and we always receive it very quickly!
Great product fast shipping. with the two wires I could mount them on fiberglass with no worries. Thanks e trailer, great job. lights work great and are very bright...
Jim B - 05/14/2014
Exact replacement of the original traditional light. I was able to use the original mounting holes. I really like having the dedicated ground wire.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.