Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 DIodes - Driver Side
(94 reviews)
Price: $29.59
In Stock
Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 DIodes - Driver Side
Item # RVSTL61
Our Price: $29.59
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (94)
- Q & A (0)
- Photos
Optronics Trailer Lights - RVSTL61
- Tail Lights
- Rectangle
- LED Light
- Red
- 8-11/16L x 3-3/16W Inch
- Surface Mount
- License Plate
- Rear Reflector
- Stop/Turn/Tail
- Non-Submersible Lights
- Optronics
8-11/16" x 3-3/16" Rectangle. Low-profile RV combination tail light light serves 4 functions: brake, tail, turn, and license plate light. Mounts on surface of trailer with built-in license plate bracket. 3-Wire pigtail.
Features:
- Low-profile RV tail light serves 4 functions
- Stop light, tail light, turn signal light, and license plate light
- Built-in license plate bracket allows easy mounting of license plate
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable white ABS plastic base
- Red acrylic lens can be easily replaced
- Clear lens for license plate light
- Mounts on surface of trailer - hardware not included
- 3-Wire pigtail
- White wire for ground
- Black wire for tail light
- Green wire for stop/turn signal light
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
Specs:
- Configuration: driver's side (left-hand side)
- Passenger's-side light (RVSTL60) sold separately
- Light dimensions: 8-11/16" long x 3-3/16" wide x 2-1/8" deep
- Height with license plate bracket: 5"
- Diodes: 9
- Power draw at 12.8 V:
- Stop/turn signal light: 0.243 amps
- Tail light: 0.046 amps
- Quantity: 1
- Lifetime warranty on LEDs
RVSTL61 Optronics Low Profile Combination LED Camper Taillight w/ License Plate Illuminator and Bracket - Left Side - Red Lens - White Base
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 DIodes - Driver Side - RVSTL61
Average Customer Rating: 4.8 out of 5 stars (94 Customer Reviews)
8-11/16" x 3-3/16" Rectangle. Low-profile RV combination tail light light serves 4 functions: brake, tail, turn, and license plate light. Mounts on surface of trailer with built-in license plate bracket. 3-Wire pigtail.by: Brian09/01/2022
Well I went to install my drive's side light with license plate holder and found out that both lights sent to me are the same driver's side light, lucky for me because one of them was broken.
As for the other items I haven't installed them yet but at least the appear to be the correct item and not broken.
by: Pat B.03/23/2017
These were an exact replacement from the originial incandescents and have performed flawlessly. I bought both with the license plate bracket, and the separate LED for the license plate makes a huge difference. One unintended benefit from them is that they really light up the ground at night and is really beneficial when backing into a site at night. No complaints!
by: James G.02/16/2015
These new Optronics LED rear trailer lights work great. They are super bright and very low current draw. Voltage at the rear of my 30 foot trailer was 10.5 volts with incandescent bulbs. With LED's, it's up around 12 volts where it should be.
by: Jaime 09/09/2023
Haven't had the opportunity to install the tail light yet.
by: Robert05/12/2023
Good except the tabs that the cover snaps into were broken, I had to attach it with screws since I am leaving soon and knew I wouldn't be able to get a replacement quickly enough.
by: Michael09/05/2022
I bought these LED tail lights to replace the incandescent Bergman lights that were original on my 1999 pop-up. I was hoping for much brighter light than the old incandescent tail lights. These are brighter than incandescent, but not as bright as I had hoped. Still, it is an improvement. See the videos for how they function (LED on the left, incandescent on the right). Installing them wasn’t too bad, although they did have a different hole configuration than my old Bergman lights. So I had to do some drilling and get some banana peel rivets. I also needed to drill a hole through the taillight back plate on the right side to get it to line up with the wiring hole on my camper. The color of the wiring was also reversed from what was on my camper. A little clear silicone to fill the old holes, and I’m all set.
Review for the Low Profile RV Combination Tail Light w/ Mounting Bracket - 4 Function - 9 Diodes, #RVSTL61
by: James 08/22/2023
Works perfectly. Easy to install.
by: Nick 05/05/2023
Great upgrade for my 1999 Jayco Eagle. Easy installation.
by: Terry G06/16/2021
This was an exact replacement for the OEM tail lights on my KZ Spree travel trailer. The replacement process was very straight forward. These tail lights are much brighter than the originals, and the LEDs should last the life of the RV without the aggravating and unpredictable bulb replacement needed by the older type.
The website product description was perfectly accurate. Communication was excellent. This has also been my experience with etrailer on previous orders.
by: Paul Y04/23/2017
These LED lights are a great improvement from the originals. I'm a big fan of LEDs I replace them in everything I have if I can. much safer .
I all so installed a LED light strip, like the ones you would install under the tail gate on a pick up. with Back ups, Tail & Turn.
These Optronics light are a little smaller in size, you do have to silicon over the old holes before installing.
by: Gary 07/21/2023
Ordering was easy and delivery was quic k.
by: Todd 05/18/2023
Light works great. Was easy to install.
by: James W08/19/2016
Replaced both tail light with these lights. Went on easy, fit right where the old ones were mounted, wiring was no problem. These are a lot brighter, I hope people can see these a lot better than the old incandescent lamps.
Price was reasonable and shipping came right when you said it would arrive.
James W.
8/25/2017
Still working and looking good.
by: Steve S.06/14/2017
Cracked lens on the OEM tail light, I took the opportunity to change them out to LED. This model substantially fit the footprint of the OEM units. I have found them to have good daylight brightness, and as LED's do, they "pop" when they turn on or off. Back and forth through Atlanta and Nashville a few times already this spring in daytime traffic, it appeared that my lane changing intentions were clearly visible as I always received consideration when I signaled. And the best part; I needed them just as I was departing on a trip. Ended up I was going right by etrailer.com so they held them at the will-call counter for me. Couldn't have been easier!
And when you need electric brake stuff for your trailer, upgrade to the self-adjusting type and be happy with better brakes than you're probably used to.
by: Karen05/25/2016
I ordered LED tail lights for an old trailer that needed a brighter brake light. No problem with the order or installing the lights. I have since purchased a drop-down trailer hitch from etrailer. I'm very pleased with the products. I love the videos on the etrailer website which give me a more accurate view of the product than what I can see in just a photo; and the audio instructions/review are very helpful.
by: Jeff C.09/14/2015
I was growing weary of the incandescent bulbs on my trailer taillights coming loose, and losing the lens in one provided the perfect excuse to replace both with LED. The website was excellent, and the videos were very helpful and an unexpected treat.
Initially I was irritated when the order showed up with 1 LED and 1 incandescent. I called customer service and they rushed a replacement LED right away, which is all I can ask for.
I installed them this weekend and they look great - much brighter than the old bulbs. I haven't road-tested them yet, but don't see why I'd have any trouble. The mounting holes weren't an exact match to my old ones, darn it, but installation was a breeze.
by: Dave06/11/2015
Upgraded standard tail lights on camper trailer to LED taillights. Had to drill new holes to mount as they are close but not and exact replica of what was on the trailer. Lights are 100 times better than the original. Even the driver side light has a separate LED to illuminate your license plate. Worth the money and 30 minutes to install. LED's are brighter especially during the day. Turn and brake lights are more definitive than standard tail lights. I upgrade to LED on every trailer we have owned.
by: Paul K.05/30/2015
I recently came into a 12' popup trailer, and upon bringing it home I realized that the rear light plastic had decayed to the point where it was falling apart.
I found etrailer.com and fell in love with their well-made website, with it's massive lighting collection that was well curated and organized. It was clear to me that the people at etrailer.com are really passionate about trailer lighting! The videos of each product were awesome and really helped me figure out what I wanted to get. The lights came exactly as promised and were easy to install.
Will highly recommend!
by: Dave. B.03/30/2015
The trailer drivers side tail light license plate replacement was easy to install with written instructions and also on line video. The new LED lights are bright and a big improvement over the standard bulb in the old lens.
by: Steve A04/03/2023
Easy to replace
by: Kevin04/03/2017
These lights are an excellent upgrade for my pop-up camper. I highly recommend them over incandescents for replacement of old faded tail lights.
by: Craig Marshall08/09/2019
This is more of an etrailer review.
I was looking for a replacement of a wraparound taillight for my 1999 Jayco Eagle pop up trailer. From the advice received through your site, I found that not only had that taillight been discontinued, its replacement was discontinued as well and the product I purchased was the best available option.
This alone helped me to end my seemingly endless search for a solution and while I could acquire this cheaper in Canada, I decided to buy through etrailer given they had given me options from past comments and saved me work. I was pleasantly surprised by the ease of ordering and the speed of delivery as I now have both taillight replacements less than a week after ordering - even given a border to cross.
This is excellent and I think pretty rare customer service. I'll be back if I need anything further.
by: Tony04/08/2020
One year of use, and they are still working well. Direct replacement for the OEM lights on our 2013 Forest River Rockwood trailer. Much brighter than the incandescent fixtures they replaced.
by: CL08/20/2019
After bulb changes, rewiring and much frustration, I decided to go with a new approach. Turns out, the entire light needed replaced. Worked so well, I got another for the other side. Lights up very well behind you at night for easy vision when backing up.
25
94
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- How Many Diodes Does Optronics Low Profile RV Combination Tail Light # RVSTL61 HaveI spoke with my contact at Optronics and found that the Low Profile RV Combination Tail Light # RVSTL61 tail lights have 9 diodes.
view full answer... - Troubleshooting License Plate Light Not Working with New Optronics Tail Light Assembly On the Optronics Low Profile RV Tail Light # RVSTL61 the black wire is for the tail/running lights and the green wire is for the stop/turn signal lights. The white wire as you mentioned just needs to be grounded to the trailer frame. With this in mind it sounds like you just have the wires crossed on the light assembly. You will want to connect the green wire from the Optronics light to the red wire on your trailer. The black wire from the light will go to the green light on the trailer....
view full answer... - Are Extra Steps Needed When Converting Incandescent Trailer Lighting to LEDWhen converting a trailer from incandescent lights to LEDs it's just a straight replacement. There's no extra steps or load resistors needed like when you do the same conversion on a vehicle. You'd just wire the # RVSTL61 in place of your current lighting exactly as it currently is and you'd be set! I attached an install video for this kit for you to check out as well.
view full answer... - Recommended Replacement LED Tail Lights For Coleman CamperWe do not have a direct replacement with the same dimensions as the lights you currently have, but I do have lights that will work for you. I recommend the Low Profile Combination Tail Light, part # RVSTL61 for the driver's side and part # RVSTL60 for the passenger side. These lights have 9 LEDs and the driver side includes a 3-LED license plate illuminator. These lights are a surface mount and measure 8-5/8 x 3-3/16 x 2-1/4 inches. The license plate bracket is included with the # RVSTL61.
view full answer... - Comparing Optronics Trailer Tail Lights RVSTL61 and RVSTL0061Trailer tail light # RVSTL0061 is a ONE series light meaning it has less electrical components so it draws less power. It has a built-in reflex to help make it brighter. And it is pretty bright. Take a look at the video I have linked on it. But the regular version, # RVSTL61, will be as bright since it uses more LEDs. They are so close in brightness, as you can see in the videos, that it is a tough call. I think you would be happy with the less expensive version, # RVSTL0061.
view full answer... - Difference Between Optronics Trailer Taillights # RVSTL60 and # RVSTL61 The difference between the two lights is that the # RVSTL61 has a license plate bracket attached to the bottom of it as well as a light for illuminating a license plate whereas the # RVSTL60 does not have either.
view full answer... - Matching Light for Passenger Side to go with RVSTL61The matching passenger side light for the # RVSTL61 is the part # RVSTL60.
view full answer... - Availability of LED Taillight With Left and Right Turn Signal FunctionalityUnfortunately, we do not have a single light that can perform both the left and right turn signal functionality. Although some can be used for either the left or the right turn signal, they cannot do both at the same time. If you want to use a light like the Low Profile RV Combination Tail Light - Stop, Tail, Turn - 9 Diodes - Passenger Side # RVSTL60 you would need to also get the driver side light # RVSTL61 in order to have both signals working correctly. I have attached some review...
view full answer... - Replacing Bargman AILRST 94 Tail Lights with LED Assemblies on TrailerBased on the number you provided, it sounds like you have the Bargman 92/94 series taillight. These assemblies have dimensions of 8-9/16 inches long, 4-9/16 inches wide and 2-1/8 inches thick. I recommend verifying these measurements on your existing unit. There is not a direct LED replacement assembly for these tail lights, but we do have some options that have similar dimensions. I recommend looking at the Optronics Low Profile RV Tail Light # RVSTL60 for the passenger side and # RVSTL61...
view full answer... - Can Optronics RVSTL60 Trailer Taillight Be Installed Upside DownAbsolutely. There's no reason why you couldn't install the Optronics # RVSTL60 passenger-side low-profile trailer taillight in either horizontal orientation so that the trough-hole for wiring feeding the lamp would match up with that of your trailer. The driver's side lamp, part # RVSTL61 can only be mounted one way, because the brackets for mounting the license plate would need to stay at the bottom of the lamp. If you click the provided link, you can see a product install/demonstration...
view full answer... - Passenger Side Trailer Tail Light that Goes with Optronics Light # RVSTL61Yes, the passenger side mate is # RVSTL60. It does not have the license plate mounting bracket or the license plate light at the bottom. Both lights are LEDs and have stop/tail/turn light functions.
view full answer... - Passenger Side Light to Match the Low Profile RV Combination Tail Light # RVSTL61The part # RVSTL61 is an individual driver side light, if you wanted the passenger side to go with it you'd want the part # RVSTL60. I am confident these lights could be used on your trailer, but they won't be an exact replacement for what you currently have.
view full answer...
- Correct Replacement LED Tail Lights For 2018 Forest River Rockwood Ultra Lite 2606WSI have a complete replacement light option for you, but unfortunately the LED diode in the taillight of your 2018 Forest River Rockwood Ultra Lite 2606WS is not replaceable by itself. Based on the SAE 2 AS2T216 10 DOT you provided I was able to identify that your 2606WS uses Low Profile RV Combination Tail Light - Stop, Tail, Turn - 9 Diodes - Passenger Side # RVSTL60 as the replacement tail light. This is for the passenger side as you mentioned, but if you need the driver side as well...
view full answer... - LED Tail Light Recommendations for a 1998 Jayco Eagle Pop-Up CamperThe Wesbar light # 271594 hangs on studs so it would not work in place of the lights on your Jayco trailer but I do have another recommendation. Take a look at light # RVSTL61 for the left and # RVSTL60 for the right. These lights have mounting holes that are space 7-3/8 inches apart on center side to side and 2 inches on center top to bottom. If the lights you have now have the same mounting pattern these can be used though they do not have the same dimensions as the old lights.
view full answer...
- What Replacement Taillights Fit My 1999 Jayco Pop-Up Camper? Thanks so much for your question. What layout model do you have on your 1999 Jayco Eagle? Also, is it the fifth-wheel trailer or the pop-up camper?
view full answer... - Replacement Tail Lights For a 2000 Dutchmen Aerolite F16 Cub Travel Trailer CamperI do have a recommendation as it appears the tail lights on your 2000 Dutchmen Aerolite F16 cub travel trailer we no longer carry. You can replace the entire tail light assemblies with the Driver Side # RVSTL61 and Passenger Side # RVSTL60 lights. Then we have the Replacement Lens # AST61B which will fit either light if one should become damaged in the future.
view full answer... - Replacement Lens and Housing for 1991 Winnebago Micro Mini WarriorPlease look at the Low Profile RV Combination Tail Light w/ Mounting Bracket, # RVSTL61 and the RV Tail Light - Stop, Tail, Turn, License Plate - Black Base, # RVSTB61. Most all OEM's use the same venders for many of the parts on the coach they build on cutaway chassis, such as your 1991 Toyota Motorhome Chassis. The part numbers you provided did not pull anything up on our end but we should be able to locate something that will allow a retro fit unless you want an original factory install...
view full answer... - Replacement Tail Light Lens For Left Side Of A 2018 Grand Design MomentumI may have an option but unfortunately since trailer manufacturers don't always keep the best logs of what small parts are installed on a specific trailer, we do not have any way to confirm the correct replacement lens for your 2018 Grand Design Momentum. The Replacement Tail Light Lens # AST61B you were looking at is designed to fit on the # RVSTL61 and # RVST61 tail lights and measures 8 5/8" long and 3 3/16" tall. To confirm the fit you will need to measure your current tail lights,...
view full answer... - Replacement Tail Light Lens for 2018 Grand Design Imagine 2500RLThe Replacement Lens # AST61B referenced in your question is designed for the Optronics # RVSTL61 and # RVST61 Trailer Tail Lights. The lens itself measures 8-5/8 inches long and 3-3/16 inches tall Unfortunately trailer manufacturers do not keep a good record of smaller parts like these that they install at the factory so I am unable to verify if this is the exact replacement lens for the lights on your 2018 Grand Design Imagine. With that being said I took a look at some pictures of...
view full answer... - Solution For Replacement License Plate Bracket For Optronics RVSTLB61 Low Profile Tail LightI do have a solution, but unfortunately the backing plate with the license plate holder is not available as a replacement part. The only option is to replace the light completely. If you want to stick with the black you need the # RVSTLB61 or for white the # RVSTL61.
view full answer...
- Recommendation for Changing Incandescent Tail Lights to LED on a 1995 TrailerAll of our 1157 bulbs, LED or incandescent, have retaining tabs that are rotated 90 degrees from the contacts. We do not offer any bulbs where the contact and tabs are inline with each other. My recommendation would be to replace your tail lights with LED tail lights like part # RVSTL60 (right hand) and # RVSTL61 (left hand). These are fairly inexpensive LED tail lights that provide brake light, turn signal and tail light and license plate light functions.
view full answer... - Replacement Lens for Tail Lights on a 1999 Jayco Eagle Pop-Up CamperIf by tail light cover you mean a replacement lens then we do have a wide selection of these so there is a chance we may have what you need but I don't have any sort of parts breakdown sheet for a 1999 Jayco Eagle Pop-Up Camper so in order to see if we have have the correct replacement lens I would need both photos and measurements of the light you need a replacement lens for. With that being said, it is going to be much easier to just replace then entire light rather than looking for...
view full answer... - Determining Correct Replacement Lights For Older Optronics Lights On TrailerThanks for the picture! I reached out to my contact at Optronics and the lights in your pictures have been discontinued. The closest replacement option currently available is the Low Profile RV Combination Tail Light - Stop, Tail, Turn - 9 Diodes - Passenger Side # RVSTL60 and Driver Side # RVSTL61 which my contact mentioned will likely fit, but you will need may need to drill new mounting holes in the bracket on the trailer. I included installation videos for both of the products mentioned...
view full answer...
- Replacement Trailer Taillight Recommendation for Reflect-o-Lite 910-950The Bargman Reflect o Lite part number 910 has been discontinued. The closest match we have that is also an LED is the Optronics Light part # RVSTL61.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Tricia G
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Video Edited:
Dustin K
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
9/19/2022
oh no! I am sorry that we shipped the wrong light. Customer service will reach out to you.