8-5/8" x 3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to be taking a look at the Optronics1 LED RV tail light. This is for the drivers side of your RV. This is a rectangular RV tail light that is going to serve four functions, you are going to have your stop light, tail light, turn signal light, and you are going to have your license plate light. The One series provides bright light using fewer diods 00:00:19 when compared to other LED lights. This is going to feature durable surface bound 00:00:26 technology, that is going to be in regards to the construction of the LED circuit board. The SMT design is going to better withstand shock and vibration, it is going to allow for improved heat distribution. Now this is an LED system, LED's make great replacements for incandescent lights, they last much longer, they burn brighter, they are more efficient, you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.
The unit is going to feature a white ABS plastic base with the red acrylic lens, the lens can be easily replaced if needed, all you have to do, I find it easiest just to place a flat headed screwdriver into this slot there, push it in and simply pry the lens off of the housing, just like that 00:01:11, that is also going to be how you gain access to the four mounting holes on the unit. So put the lens back on, simply fit it over and we are going to make sure everything is lined back up, the license plate lens that has these little grooves, then just snap it back down until everything snaps back into place. So that can be replaced if needed, again that is going to be a red acrylic lens and then we are going to have the clear lens for the license plate light. This one also has your license plate mounting bracket that is built into the housing. The unit is designed to be a surface mount installation so it is going to mount on the surface of the RV, hardware not included, so that will need to be provided separately. Here on the backside you can see that it has a 3 wire design, white wire is for ground, black wire is for the tail lights, green wire is for the stop and turn signal.
This is department of transportation compliant and meets FMVSS 108 and CMVSS 108 requirements for automotive lighting. Again this is designed for the drivers side. Taking a look at the dimensions real quick, starting with the overall length measuring edge to edge, we are looking at a measurement of 8 5/8 inches long, just the housing of the light is going to give us a measurement of 3/16 of an inch, if we include the license plate brackets that is going to increase that height measurement to about 5 inches, and then the depth is going to give us a measurement of about 2 1/4 inches. The license plate holes are going to separated on center by 7 inches, the mount holes are going to be separated on center by 7/8 of an inch, then going this direction, center on center we are looking at about 7 3/8 of an inch. The power drill is going to at 12.8 volts for the stoplight 00:03:24 0.34 amps, for the turn light 0.01 amps, and the tail light is 0.094 amps. Optronics is also going to put a lifetime warranty on the LED's. I want to hook this up to our external power source so that we can see what it looks like with power running to it, so I am going to go ahead and make the ground connection, its going to the white wire, then the running lights or the tail lights black wire, and then stop and turn is going to be green wire.
Turn off your over head lights, so you can see here how the light sends out a nice consistent signal then you have the license plate light that sends out a really strong signal down towards the bottom which would illuminate the license plate. When we activate our brakes you can see how that main light illuminates for a brighter signal output. Its also going to do that when we activate our turn signal. That is going to do it for today's look at the Optronics 1 LED RV Taillight.
Average Customer Rating: 4.8 out of 5 stars (257 Customer Reviews)
8-5/8" x 3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail.So i have a 94 Jayco pop up that one of the tail lights got smashed. The company that made those lights is no longer around. After some searching on etrailer.com I decided on these LED lights. Price was right. My only real complaint is that these lights come with nothing. No screws, no instructions, no seals. So when I pulled my old lights and found that they had 4 wires and these lights had 3, time to do some research. None of the wire colors matched up. Not the trailer wires, not the old lights etc. On etrailer there is a video describing the lights in detail. Watch it. He goes over what color wire does what on the new light. I hooked the trailer up to the car to figure out the old lights wiring scheme. I was able to figure it out from there, though you cannot wire both sides up the same, if you do when you put the turn singles on they both flash. I had to leave the brake light wire disconnected on one side. Brake lights still work without it. I used plumbers putty to create a seal. That is also what they used on the originals and I used the original screws to make new holes and mount the lights. All in all it worked out but instructions would have been greatly appreciated!. I am sure etrailer would have jumped in to assist if I asked but it was not needed. Pictures posted. Old lights on bumper for reference. 704269
I would like to take this time to let you know that I appreciated your very quick service as well as your excellent products. Thanks again and I will be letting my friends know about you in the future. Thanks again, Ed 411278
I used the Optronics LED lights to replace the old dim lights on my wife's vintage trailer. They were easy to install and are nice and bright. 479366
I bought these to add on to my existing trailer lights so they would be easily visable above the extras loaded on the rear platform, and so my license plate would not be partially obscured (a violation in many states). They are just as bright as the original equipment, if not brighter. The only criticism I have is the wiring does not follow the standard color code, so brown to brown etc. did not work. It was easy enough to fix, so wire it then test before you make final connections and seal it up. 307851
Light bright and functional. (lense clip broke on passenger side light) 692909
An easy to install exact replacement for the tail light on my camper. 656117
Fit perfect 644053
Found just I was looking for, website is great. My order shipped sooner than I expected and I had it in 3 days. Great service again from etrailer, I will be back. 637516
Needed to replace my camper's tail lights (corroded lamp sockets & cracking housings). Removed the old lights and easily installed the new LED lights. I"m happy with the sturdy construction and bright lights. The only issue was the wiring convention didn't line up with my Forest River camper. I had to switch the tail light and stop light wires. 634029
As always etrailer was there for me when I needed an item for my travel trailer. It's good to know you guys always have the right product for me. Thanks guys 599348
Ron - 01/23/2020We accidentally broke the license tag bracket on our camper and needed to replace the entire tail light assembly. An internet search led me to a replacement unit that exactly matched the one on our pop-up, which was available from etrailer.com. Since the replacement light was LED, we replaced the tail light assembly on both sides. Since the screw holes exactly matched, no modification was required, and the installation took about 30 minutes. 575853
Glad I found this website. I needed replacement tail lights and eTrailer was the go-to company. Great customer attention and amazing products delivered in a timely manner. 447759
Exactly what I needed delivered in a timely manner. 440970
Nice led upgrade 406649
Quick ship looks great and easy to inst al. 385577
I received the tail lights I needed today, they are exactly what I wanted and appear to be good quality. This was my first time using etrailer.com, it was a very good experience, the items were shipped and received sooner than I expected. I would recommend etrailer as a good source for trailer parts etc. 348376
Parts arrived alright. Service so far is great. Will know more after install. 344882
Exactly what I expected, quality = cost, timely shipment "without a hitch". Now to see if the trailer lights work..... 326415
Great service,fast shipping. Would recommend to everyone. Now I'll have led lights on my travel trailer. Looked every where for the same low profile lights I have and you had them. 301221
Work great,easy upgrade to my old lights , Could not keep the bulbs in the socket of the old one. Don't have to worry about that with these 264821
Great price. Quick shipping 264181
Replaced original tail lights with these LED's nice and bright easy install 249034
Review from a similar Optronics ONE in Trailer Lights
I put these on a boat trailer so we haven't used them much. However, they arrived quickly, were easy to install and are still working. 591340
Review from a similar Optronics ONE in Trailer Lights
These lights mounted up and wired easy with out any changes to the trailer and are brighter than the original ones. First time I use LED trailer lights and hope they will be trouble free for many years. Purchased two sets of lights I will change out on my second boat trailer. In the pass I have to change bulbs two or three times a year, I hope this will change. 425636
Review from a similar Optronics ONE in Trailer Lights
Excellent quality at an affordable price. Plus shipping was super quick. I have purchased numerous products from these guys. Customer service is second to none. I repeat, customer service is second to none. Thank you etrailer for setting the standard ALL online companies should follow 570993
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.