We'll connect you with nearby partnered installers who know this exact setup.

Optronics

ONE LED RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangular - Surface Mount - Red

Part Number: RVSTL0060

150 Reviews | 10 Questions

In Stock

$18.01

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

optronics trailer lights tail non-submersible one led rv light - brake turn passenger side rectangular surface mount red

optronics trailer lights tail brake/tail/turn

optronics trailer lights brake/tail/turn non-submersible

optronics trailer lights tail non-submersible rvstl0060

optronics trailer lights tail 8-5/8l x 3-3/16w inch

optronics trailer lights tail brake/tail/turn one led rv light - brake turn passenger side rectangular surface mount red

optronics trailer lights brake/tail/turn 8-5/8l x 3-3/16w inch rvstl0060

optronics trailer lights non-submersible 8-5/8l x 3-3/16w inch rvstl0060

optronics trailer lights brake/tail/turn non-submersible rvstl0060

optronics trailer lights tail 8-5/8l x 3-3/16w inch one led rv light - brake turn passenger side rectangular surface mount red

Show All (11) Product Images

Show Fewer Product Images

Customer Photos

ONE LED RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangular - Surface Mount - Red customer photo

Show All (7) Customer Images

Show Fewer Customer Images

Videos

Review of the ONE LED RV Combination Tail Light

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV. Great Prices for the best trailer lights from Optronics. ONE LED RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangular - Surface Mount - Red part number RVSTL0060 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (150)
Q & A (0)
Related Parts
Photos

Optronics Trailer Lights - RVSTL0060

Highlights

One Light, 3 Functions: Provides brake, tail, and turn signals on the passenger side.
Reliable LED Output: Uses a single white LED with a red lens for efficient, bright light.
Simple Wiring Setup: 3-wire pigtail—white for ground, black for tail, green for stop/turn.
Quick Surface Mount: Installs easily on flat surfaces; hardware sold separately.
Low Power Draw: Uses just 0.32 amps for stop/turn and 0.01 amps for tail at 12.8V.
Road Legal: Meets DOT, FMVSS 108, and CMVSS 108 standards for safe operation.

Features to know about

Brighter and More Efficient Lighting: One LED That Does It All

This rectangular passenger-side tail light uses a single white LED with a red lens to handle brake, tail, and turn signals. It’s more efficient and durable than incandescent bulbs, drawing only 0.32 amps for stop/turn and just 0.01 amps for tail light at 12.8 volts. You get bright, reliable lighting with minimal power draw—perfect for keeping things simple and effective without worrying about bulb replacements.

Simple Wiring and Setup: Straightforward 3-Wire Connection

The light uses a 3-wire pigtail to make installation easy. The white wire connects to ground, the black wire powers the tail light, and the green wire handles stop and turn functions. If your old light grounded through the hardware, just attach the white wire to a clean bare metal spot on your frame for a solid connection. Once wired, you’re ready to go—no complex setup or guessing which wire does what.

Built to Last: Durable Housing and Lens

Made with a white ABS plastic base and an acrylic lens, this light is built for long service life. The materials resist wear and cracking, keeping the light sealed and dependable even with regular use. The LEDs come with a lifetime warranty, so you know the core of your lighting system is built to last as long as your rig does.

Clean Fit Mounting: Flat Surface Installation

Designed for surface mounting, this light sits neatly against a flat panel without requiring cutouts or special brackets. Measuring 8-5/8" long x 3-3/16" tall x 2-1/4" thick, it offers a low-profile look that blends smoothly into most setups. The hardware is not included, so you can choose the right fasteners for your mounting surface and get a clean, finished fit that’s solid and reliable.

Road-Ready Safety: DOT and CMVSS Approved

This light meets FMVSS 108 and CMVSS 108 requirements for brake, turn, and tail lights, so it’s fully compliant with safety standards right out of the box. You’ll have confidence that your signals are bright, visible, and legal wherever you travel.

Specs

Configuration

Passenger’s side (right-hand side)
Driver’s-side light: RVSTL0061 (sold separately)

Dimensions

Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick

Dimensional diagram of Optronics ONE LED RV Tail Light model RVSTL0060 showing length, width, and thickness measurements for passenger-side rectangular surface mount light.

Electrical

Power draw at 12.8 volts (Stop/turn signal light): 0.32 amps
Power draw at 12.8 volts (Tail light): 0.01 amps

Warranty

Lifetime warranty on LEDs

RVSTL0060 Optronics ONE Series Combination LED Camper Taillight - Right Side - Red Lens - White Base

Customer Satisfaction Score:

98% were satisfied with this product

2% of customers were not satisfied

etrailer mistake

2% of customers were not satisfied

etrailer mistake

4.8

150 reviews

5 Stars		(123)
4 Stars		(23)
3 Stars		(3)
2 Stars		(0)
1 Star		(1)

by: Shyler 07/22/2026

Amazing worked great! We have a 1976 camper and it works and looks great! We bought the wedge mount as well: RV60BK
Got here very fast and they sent information about troubleshooting and how to install.

Click to Enlarge

Heather A.

7/23/2026

The lights look great Shyler! I love the retro camper. Where do you like to take it?

by: Larry 09/29/2026

I ordered 2 because I didn't see the driver side lense

by: Ken T 09/15/2019

So i have a 94 Jayco pop up that one of the tail lights got smashed. The company that made those lights is no longer around. After some searching on etrailer.com I decided on these LED lights. Price was right. My only real complaint is that these lights come with nothing. No screws, no instructions, no seals. So when I pulled my old lights and found that they had 4 wires and these lights had 3, time to do some research. None of the wire colors matched up. Not the trailer wires, not the old lights etc. On etrailer there is a video describing the lights in detail. Watch it. He goes over what color wire does what on the new light. I hooked the trailer up to the car to figure out the old lights wiring scheme. I was able to figure it out from there, though you cannot wire both sides up the same, if you do when you put the turn singles on they both flash. I had to leave the brake light wire disconnected on one side. Brake lights still work without it. I used plumbers putty to create a seal. That is also what they used on the originals and I used the original screws to make new holes and mount the lights. All in all it worked out but instructions would have been greatly appreciated!. I am sure etrailer would have jumped in to assist if I asked but it was not needed. Pictures posted. Old lights on bumper for reference.

Click to Enlarge

by: Richard 04/20/2019

Tayler at E Trailer was amazing. I purchased a tail light, and after a few months it stopped working. Tayler walked my through a few tests to determine the problem. It was the light. She sent me a new light immediately, free of charge. Great customer service. I will be shopping here again.
Thank you Tayler

Click to Enlarge

by: Robert 07/21/2025

Exact replacement lights. Screws went right back in the original mounting holes

by: Warm in Florida 10/17/2016

I bought these to add on to my existing trailer lights so they would be easily visable above the extras loaded on the rear platform, and so my license plate would not be partially obscured (a violation in many states).
They are just as bright as the original equipment, if not brighter. The only criticism I have is the wiring does not follow the standard color code, so brown to brown etc. did not work. It was easy enough to fix, so wire it then test before you make final connections and seal it up.

by: UncleFoolio 11/30/2021 One Year Later

Bought this a year ago to replace my regular lights. Much brighter than previous, and still working great! Being LED, bulb will last waaaay longer, and consume less power. In my testing for inside lights, LED bulbs use about 1/4 amp, compared to 1 amp for regular bulbs. I'd imagine the same will hold for these tail lights, or at least similar.

by: Vance 10/19/2018

We accidentally broke the license tag bracket on our camper and needed to replace the entire tail light assembly. An internet search led me to a replacement unit that exactly matched the one on our pop-up, which was available from etrailer.com. Since the replacement light was LED, we replaced the tail light assembly on both sides. Since the screw holes exactly matched, no modification was required, and the installation took about 30 minutes.

by: Bill 04/22/2019

2011 Forest River Flagstaff Classic Camper

Needed to replace my camper's tail lights (corroded lamp sockets & cracking housings). Removed the old lights and easily installed the new LED lights. I"m happy with the sturdy construction and bright lights. The only issue was the wiring convention didn't line up with my Forest River camper. I had to switch the tail light and stop light wires.

by: DonR 07/15/2021

Quality of these lights is very good! The only negative part of my experience is during installation. These lights do not donform to what I believe is an industry standard regarding the wire colors. I hooked the white, green and black wires to like colors coming out of the RV unit. Much to my dismay, the lighting was reversed (stop/turn illuminates when parking lights should and vice versa). Once I reversed the green and black wires, everything worked as it should. There was no instruction sheet with this shipment so it was not a case of my not following instructions.

by: BQ 08/23/2019 One Year Later

lights are nice and bright, however one of the lense 'release' clips on the base broke off during installation. I have a screw holding the lense in place, and it still functions fine. (the clips on the base that hold these lenses on are a molded plastic and broke easily)

by: Larry Swientek 09/28/2016

Great service,fast shipping. Would recommend to everyone. Now I'll have led lights on my travel trailer. Looked every where for the same low profile lights I have and you had them.

by: Paul N. 05/29/2017

Good replacement lens for the brake light on my travel trailer. The only knock is there isn't a chase for the wires on the backside of the light.

by: Stephen 10/31/2017

Glad I found this website. I needed replacement tail lights and etrailer was the go-to company. Great customer attention and amazing products delivered in a timely manner.

by: Tim 12/14/2016

Exactly what I expected, quality = cost, timely shipment "without a hitch". Now to see if the trailer lights work.....

by: Jason 05/07/2016

Replaced original tail lights with these LED's simple install bright LED

by: Lisa 08/15/2025

2016 Forest River Rockwood Mini Lite Travel Trailer

Great quality and prices. Got my items in 2 days. Thank you!

by: David 05/03/2019

Found just I was looking for, website is great. My order shipped sooner than I expected and I had it in 3 days. Great service again from etrailer, I will be back.

by: Joe B 03/04/2017

I received the tail lights I needed today, they are exactly what I wanted and appear to be good quality. This was my first time using etrailer.com, it was a very good experience, the items were shipped and received sooner than I expected. I would recommend etrailer as a good source for trailer parts etc.

Click to Enlarge

by: Robert 06/03/2024

2017 Coachmen Apex Nano Travel Trailer

These were a perfect match for my existing tailights. A quick replacement of the old bulb style to the new LEDs. Fast change out and worked just as expected.

by: Steve 03/14/2020

Great product, easy to install and wire up, works great. Odelia was great also, very helpful, friendly, and professional. Great job etrailer, thanks.

by: Thomas 05/27/2025

2012 Prime Time Avenger Travel Trailer

Just wish it had come with a gasket.

by: Glenn 05/19/2024

great product, fast shipping and they let you know you are getting it

by: Edward A. Westbrook 07/22/2017

I would like to take this time to let you know that I appreciated your very quick service as well as your excellent products. Thanks again and I will be letting my friends know about you in the future.
Thanks again,
Ed

by: Diego 12/11/2021

2008 Chevrolet Silverado

Works well. I don't understand why it was delivered in an open bag packed in box and it appeared it had been used when I assumed I was purchasing a new product. Also I order two fixtures, one with plate bracket with black base color and this one with a white base color.

Sierra K.

12/14/2021

Customer Service will reach out to you.

150

true

Show More Reviews

See what our Experts say about this Optronics Trailer Lights

Do you have a question about this Trailer Light?

How to Install Trailer Light with Red, Black, and Green Wires
There is not a standard wire color to function chart on a trailer for anyone to abide by so it will be best to test for function with a circuit tester. In order to check this all you need to do is start the vehicle, plug the trailer connector in, and test each of the wires while the corresponding signal is activated. The light should then specify which wire is for which function but you will again need to test the trailer wiring to determine which color wire has which function. Unfortunately,...
view full answer...
How to Install a Three Wire Trailer Light
It sounds like your current lights with 2 wires ground to the trailer by the mounting hardware. The One LED RV Passenger Tail Light # RVSTL0060 has three wires, the white wire is the ground, the black wire is the taillight and the green wire is for your stop lights and turn signals. To hook up your lights you will need to splice together the taillight and stop/turn wires. Then you will need to take the white wire and ground it to the trailer itself. To ground your wire you will want to...
view full answer...
Needing a Replacement Taillight Cover for a 1998 Jayco Eagle Popup Camper
I found an answer to your question, unfortunately there are no direct replacement lenses for the Wesbar lights on your 1998 Jayco Eagle. The lenses have been discontinued and are no longer available. However, we do carry new taillight assemblies that can replace the OEM lights on your camper. Bargman Trailer Tail Light - Stop, Tail, Turn, and License Red Lens # 30-92-003 and the Bargman Surface Mount Tail Light - Red # 30-92-001 will fit on our camper. These light assemblies will function...
view full answer...
Wiring a 3-Wire Trailer Light with White Black and Green Wires
A trailer light with 3 wires, like # RVSTL0060, that are black, white, and green generally the black wire is for running lights, green is for stop and turn signal, and white is for ground. If the old light on your trailer only used 2 wires, then it likely was grounded through the mounting hardware. Which means you'll need to find a good ground bare metal location to connect the white wire to. Make sure you check the function of the trailer's wiring before connecting to the new light...
view full answer...
Comparing Optronics One LED to Low Profile LED Tail Light
The Low Profile RV Combination Tail Light - Stop, Tail, Turn - 9 Diodes - Passenger Side # RVSTL60 and the ONE LED RV Combination Tail Light - Stop, Tail, Turn - 1 Diode - Passenger Side # RVSTL0060 has the same dimensions so the difference between them is the number of diodes and the brightness of the light.
view full answer...
Replacement Tail Light Solution for 1998 Jayco Eagle
found an answer to your question, unfortunately there are no direct replacement for your 1998 Jayco Eagle. The lenses have been discontinued and are no longer available. However, we do carry new taillight assemblies that can replace the OEM lights on your camper. Bargman Trailer Tail Light - Stop, Tail, Turn, and License Red Lens # 30-92-003 and the Bargman Surface Mount Tail Light - Red # 30-92-001 will fit on our camper. These light assemblies will function as tail, stop, turn signals....
view full answer...
LED Tail Light To Replace Optronics RVSTB60
The RV Tail Light - Stop, Tail, Turn - Rectangle - Red Lens part # RVSTB60 in LED is Optronics LED RV Combination Tail Light w/ Mounting Bracket - 4 Function - 1 Diode - Driver Side part # RVSTL0061 and passenger side part # RVSTL0060. This particular LED light measures 8-5/8" x 3-3/16" which is the same as the incandescent RVSTB60 light. The great thing about LED lights is they last much longer and draw less power than the incandescent options.
view full answer...
Troubleshooting Backup/Observation Camera Wiring Where Reverse Light Is Constant With Running Lights
Thanks for the photo and explanation. It sounds like you have connected your camera to the running light circuit which will give you constant power, but it appear one of your other wires is not for your ground connection. Normally white is a ground wire, but on a 3 wire system like you state with reverse light function, one of those wires is dedicated only to reverse power. Your three wires will have the following functions: One is running/park lights One is reverse lights One is combined...
view full answer...
Troubleshooting Trailer Tail Light Wiring
With 3 wires on tail lights, you normally will have one running light wire, one brake light/turn signal wire and a ground wire. You are most likely correct that the two identical color wires will be one for running lights. The purple wire could be a separate ground, or if you have reverse lights will be the reverse light wire. If that is the reverse light, then the tail lights will ground through the mounting hardware so will want to make sure you have a solid metal to metal connection...
view full answer...
Recommendation for LED Taillight Replacement for Taillight 30-92-003
There isn't an exact LED replacement for the taillight style of the # 30-92-003 but the part # RVSTL0061 is a very similar setup that is LED. For the passenger side (means without license plate bracket) we have the part # RVSTL0060.
view full answer...

Do you have a question about this Trailer Light?

Info for this part was:

Edited by:

Leah B

Expert Research:

Jameson C

Installed by:

Cole B

Written by:

Amy B

Updated by:

Wilson B

Updated by:

Brian T

Updated by:

Amanda K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.