1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
ONE LED RV Combination Tail Light - Stop, Tail, Turn - 1 Diode - Passenger Side

ONE LED RV Combination Tail Light - Stop, Tail, Turn - 1 Diode - Passenger Side

Item # RVSTLB0060
lowest price pledge
Our Price: $14.26
You Save: 37%
Trailer Lights
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.55 lbs
In Stock
RVSTLB0060 - Rectangle Optronics Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
8-5/8" x 3-3/16" Rectangle. RV light serves 3 functions: brake, tail, and turn. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount - hardware not included. 3-Wire pigtail. Lowest Prices for the best trailer lights from Optronics. ONE LED RV Combination Tail Light - Stop, Tail, Turn - 1 Diode - Passenger Side part number RVSTLB0060 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (465)
  • Q & A (5)
  • Videos (1)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - RVSTLB0060

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 8-1/2L x 3W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Non-Submersible Lights
  • Optronics

8-5/8" x 3-3/16" Rectangle. RV light serves 3 functions: brake, tail, and turn. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount - hardware not included. 3-Wire pigtail.


  • Rectangular RV tail light serves 3 functions
    • Stop light
    • Tail light
    • Turn signal light
  • ONE Series provides bright light using fewer diodes than other LED lights
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable ABS plastic base
  • Red acrylic lens can be easily replaced
  • Compatible with 12V DC systems
  • Mounts on surface of trailer with bracket (sold separately)
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Green wire for stop/turn signal light
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting


  • Configuration: passenger's side (right-hand side)
    • Driver's-side light (RVSTLB0061) sold separately
  • Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep
  • Diodes: 1
  • Power draw at 12.8 volts:
    • Stop/turn signal light: 0.34 amps
    • Tail light: 0.01 amps
  • Quantity: 1
  • Lifetime warranty on LEDs

Optronics RVSTLB0060 RV Tail Light Dimensions

RVSTLB0060 Optronics ONE Series Combination LED Camper Taillight - Right Side - Red Lens - Black Base

California residents: click here

Video of ONE LED RV Combination Tail Light - Stop, Tail, Turn - 1 Diode - Passenger Side

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Optronics Trailer Lights - Tail Lights - RVSTLB0060 Review

Today we're going to be taking a look at the Optronics ONE LED RV tail light. This is for the passenger side of our RV. The rectangular tail light is going to serve three functions such as a stop light, tail light, and turn signal light. The ONE series is going to provide bright light using fewer diodes than other LED lights. It's going to feature durable surface-mount technology. That's going to help better withstand shock and vibration and it's going to allow for improved heat distribution. The SMT design is when it comes to the construction of the LED circuit board.

Now, LEDs are going to make great replacements for incandescent lights. They're going to burn brighter, last longer, and they're much more efficient. You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. The unit is going to feature a nice black ABS plastic base with a red acrylic lens. The lens can be replaced if needed. I find it easiest to simply place a flat-head screwdriver in this area here and simply just pry the lens from the housing.

That's also how you're going to gain access to the mounting holes, four mounting holes, one on each corner. Then you can put the lens back on. Snap it over the housing. It's got the holds on each end to securely hold the lens to the housing. This is a surface-mount installation.

Your hardware is not included. Here at the back we can see that it is a 3-wire design. White wire is for ground, black wire is for the tail light, green wire is for the stop and turn signal. The unit is Department of Transportation compliant. It meets FMVSS and CMVSS 108 requirements when it comes to automotive lighting. Again, it is designed for the passenger side of the RV.

If we take a look at some of the measurements real quick it's going to give us an overall length measurement. That's going to measure, looks to be 8 and 5/8 of an inch long. The height is going to be 3 and 3/16 of an inch. The depth is going to measure 2 and 1/4 of an inch. When it comes to the mount holes, center on center going this direction we're looking at 1 and 7/8 of an inch apart. Then going this direction, center on center the distance between the holes, that's going to give us a measurement of about 7 and 3/8 of an inch. When it comes to the power draw, it's going to be at 12.8 volts for the stop light at 0.34 amps. For the the turn signal light it's 0.01 amps. For the tail light it's 0.094 amps. Optronics is going to put a lifetime warranty on the LEDs. We're going to go and hook it up to our actual power source that way you can see what it looks like with power running to it. We'll also be able to turn off our overhead lights so you're going to see it in a low light setting. I'm just going to go ahead and make all of our connections real quick. So here you can see it sends out a nice consistent signal. This is going to be the tail light or running light. When we apply the breaks you can see how that signal output increases. It's also going to do that when we activate our turn signal. That's going to do it for today's look at the Optronics ONE LED RV tail light.

Customer Reviews

ONE LED RV Combination Tail Light - Stop, Tail, Turn - 1 Diode - Passenger Side - RVSTLB0060

Average Customer Rating:  4.8 out of 5 stars   (465 Customer Reviews)

8-5/8" x 3-3/16" Rectangle. RV light serves 3 functions: brake, tail, and turn. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount - hardware not included. 3-Wire pigtail.

- RVSTLB0060

I had trouble finding the part I needed by the time I needed it. etrailer had the part in stock at a great price and even managed to get it on its way sooner than expected. This allowed us to go camping per our reservation. Great company and great service.

- RVSTLB0060

perfect fit. Exact replacement, and great price !!. It made the job quick and easy.

- RVSTLB0060

Good replacement on our Grey Wolf toy h auler.

- RVSTLB0060

I purchased these to replace my tail lights on my Rockwood trailer. The units I removed used the regular incandescent bulbs and even though they are only 2 years old they were already acting up. They get corroded in the socket areas even with trying to keep them clean. These fit perfect (exact same fixture) are twice as bright the flash is faster (with the LED fitment) and the obvious choice for replacement/upgrade with very little fuss. The pricing was excellent and the shipping was extremely fast. Communications with this company is spot on. If you have a question they get right back to you in short order. They also give great recommendations as well. The tail lights were delivered Friday and I installed them in 20 minutes on Saturday. I have purchased from you guys in the past and will in the future. Thank you...

- RVSTLB0060

Very easy to install. A lot brighter then the old halogen I had in.

- RVSTLB0060

perfect fit, easy to replace.

- RVSTLB0060

Good quality, and functions as advertised. Brighter than the original incandescent units they replaced, but not quite as bright as I had hoped for. It took more time than expected to install these lights, but I was pretty cautious about leaks and used butyl tape under the units, and silicone around the outside. I previously updated all of the clearance lights to LED with Bargman conversion units from etrailer. Our trailer is now 100% LED.

- RVSTLB0060

Installed new LED tail lights on trailer very satisfied

- RVSTLB0060

Upgrading our Aliner to 21st century lighting. Both tailights arrived broken on the original order due to rough shipping. They were promptly replaced with no additional charges. This is above and beyond standard customer service for me. Item quality is what I expected.

- RVSTLB0060

Unit as advertised and easy to put on.

- RVSTLB0060

Products are working fine. Actually looking to purchase some more within the next month.

Everything is still working great. your still bookmarked in my list of places to check when i need something, havent had any more projects lately.
Dana - 04/02/2018

- RVSTLB0060

The replacement part was exactly what I needed. However I wish the description and video would have shown the inner parts of the lens. Also it didn't mention whether it came with the rubber (water barrier) backing or not, which it did not. It was easy installation and it works fine.

- RVSTLB0060

Lights were very easy to install. Work perfectly. They are just a little smaller than the old type I replaced. Very satisfied with them. etrailer shipped FAST !

- RVSTLB0060

Decent brightness and good brightness separation between the tail lights and the brake/signal light

- RVSTLB0060

Easy replacement for old incandescent lamps. As bright or brighter. No more worrying about corrosion, etc.

- RVSTLB0060

A much needed upgrade. These lights can be seen day or night. I would buy again.

- RVSTLB0060

Great replacement for my travel trailer.

- RVSTLB0060

tested when I received the light, almost blinded myself. cannot wait to install on my travel trailer

- RVSTLB0060

You guys are awesome! It showed up the next day. Thank you.

- RVSTLB0060

Nice brite lightw. Very visible even in daylight

- RVSTLB0060

Looks great. Not installed yet but should work fine.

- RVSTLB0060

just as advertised, arrived on time, and they kept me informed through the whole transaction

- RVSTLB0060

great replacement for the OEM Halogen lights. took 5 minutes, cut the old wire and put the new on and added some silicone.

- RVSTLB0060

- RVSTLB0060

Great product.

Show More Reviews

Ask the Experts about this Optronics Trailer Lights

  • Are the RVSTLB0060 and RVSTLB0061 a Matching Pair of Lights
    Yes. I can confirm that the # RVSTLB0060 (passenger side) and # RVSTLB0061 (driver's side) are a matched pair of LED lights. The only difference between these two lights is that the driver's side # RVSTLB0061 has brackets to hold the license plate.
    view full answer...
  • Comparison Of RVSTLB0060 And RVSTLB60 Trailer Lights
    There are only a couple differences between the # RVSTLB60 and # RVSTLB0060 trailer lights. The # RVSTLB0060 features a ONE Series LED light which is brighter than traditional LED lights. The light measures 8-5/8 inches long. The # RVSTLB60 has 9 LED lights and it measures 6-11/16 inches long. Both lights measure 3-3/16 inches wide and 2-1/4 inches deep, and they have snap-on lenses and use a 3-wire pigtail.
    view full answer...
  • What is the Difference Between Optornics Trailer Taillights # RVSTLB0060 and # RVSTL60
    The two Optronics lights part # RVSTLB0060 and # RVSTL60 will both be the same brightness. The difference is that the part # RVSTL60 has a white base and the other has a black base. In the review videos I attached for both products you can see how bright they are.
    view full answer...
  • Does RV Light RVSTLB0060 Need to be Sealed
    I checked your order notes and it looks like you ordered the ONE LED RV Tail Light # RVSTLB0060. This light isn't designed to be sealed. It has a removable lens and a backing plate with a larger hole in it so there would be no need to seal this up.
    view full answer...
  • Replacement Tail Light Options for 2016 Coleman Lantern Travel Trailer
    It sounds like you are looking for a replacement passenger side tail light for your 2016 Coleman Lantern 274bh trailer by Dutchmen. If that is the case, we have exactly what you are looking for! From my research, it looks like those trailers came with incandescent lights, but could've been upgraded to LED, so I'll give you both options. For an incandescent light, you will want part # RVSTB60. For an LED light, you will want part # RVSTLB60 We also have the drivers side lights if...
    view full answer...

Do you have a question about this Trailer Light?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.