Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
(54 reviews)
Price: $212.13
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
Our Price: $212.13
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (54)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums
- 8 on 6-1/2 Inch
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Hub with Integrated Drum
- 1/2 Inch Stud
- Standard
- Dexter
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb to 7,000-lb axles with #42 spindles
- Drum dimensions: 12" diameter x 2" wide
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Grease cap flange diameter: 2.72"
- Wheel stud diameter: 1/2"
- Weight capacity: 3,500 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 14125A (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 14276
- Grease seal (included): GS-2250DL
- Inner diameter: 2.25"
- Outer diameter: 3.376"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-219-9B Dexter 12" Hub and Drum Assembly for 5.2K to 7K with Hardware - 6 on 5-1/2
Replaces 42866UC3
Item # 42866UC3
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - 42866UC3
Average Customer Rating: 4.6 out of 5 stars (54 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Michael06/14/2023
Missing parts on right hand brake assembly. Need ASAP.
by: Stefan 11/08/2023
Did an excellent job!!
by: Curt C05/31/2016
Dexter hubs are a perfect fit to Dexter brake assemblies. Perfect fit and brake good. Self adjustors keep the trailer brakes always adjusted correctly.
Drums are machined round and true, not like willfit drums which have to be turned
by: John 10/18/2022
Every order with eTrailer is a pleasure. This trailer hub kit is exactly what I needed, and comes complete with everything needed to replace the hub, short of grease.
by: Local Jamok01/10/2020
What can I say name brand quality never need to adjust trailer brakes why would you buy anything else. Braking is much more balanced and dependable.
by: Cliff07/10/2019
I'm not much for writing but everything I have order from etrailer has worked very good
thank you
Cliff
Cliff
7/14/2020
working great on gooseneck horse trailer
by: mike d06/30/2011
new dexter wheel hubs, delivered on time, new dust caps, new seals (2 1/4") , new lugs and nuts , new bearings. one bearing is the wrong size, but I dont care will pick up locally. these were backordered for most places in western NY, got em just as fast and far better price. will be ordering more soon. currently servicing 6 trailers with this or similar hub.
by: Bob11/25/2021
not only am i happy with the product purchased but with the service from etrailer i had to return some parts and they were fantastic to deal with. I would purchase from them again for sure
by: Reese J.01/23/2018
Received three out of four in great shape. The fourth had damaged parts inside but etrailer sent me new parts. Used these to change from UTG to regular rims. Tire changes so much easier. I always recommend etrailer.
by: Curt C11/13/2015
Fast service and great parts. Matching Dexter brakes with drums is great, brakes work better then ever
by: John03/19/2022
Beautiful Dexter hubs to replace ones that were worn out. working wonderfully and everything. only problem was shipping was 3 days late even after I paid for expedited shipping
by: Lisa 06/08/2021
Exactly what we ordered and needed!
The customer service was great, we needed these parts ASAP so I called multiple times and each time the person I spoke to was great, very friendly, patient, kind and eager to help! Thank you!
by: Shane05/25/2022
Good quality, fit was good and they held up well upon yearly inspection.
by: Brian10/06/2016
No issues with product. Installed on trailer and works great
by: CM09/05/2017
Personnel was excellent to deal with in finding the right replacement part without any numbers or reference markings on the old part. Very well trained staff with knowledge of the parts they are selling.
by: ted f.06/01/2012
Products are good, easily identified, and no surprises.
The service is excellent, very dependable and delivery is very fast.
Very happy dealing with etrailer; highly recommended to freinds.
Excellent website too.
by: Brian w06/27/2012
Katherine jason was most helpful ! Everything looks great except brake shoes on r.h. brake assembles were chipped up during shipment but still usable . I would definately order again !
by: Lucas Automotive 02/14/2016
Quick delivery. Most everything was made in USA, Which means a lot. Thanks
by: Jonathan 10/18/2022
Great Chat Services
by: Fixer L.03/11/2017
Item was shipped and delivered very quickly. Shipping container was damaged, but items were fine. Top quality product at a Great Price. 4 stars because shipping container was to big for heavy drums. Drums were able to move freely. Corner of box had a large tear in it (open). Nothing fell out of container, drums had some rub wear marks. Thanks for the fast shipment and quality product.
by: Thomas06/07/2020
easy, user friendly website. parts were correct & price was great. THANKS TOM
by: Allen 11/28/2020
Great products fast shipping great to work with
by: Jason11/05/2014
Great service fast shipping
by: Mark03/22/2018
Wished the product had been shipped with the other parts. Steve Z saved the day by recommending an another brand.
25
54
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Trailer Idler Hub that Uses Bearings 25580 and LM67048 with a 2-1/8 Inch Inner Diameter SealFor an idler hub that takes inner bearing # 25580 and outer bearing # LM67048 you can use # 8-213-5UC1 which is rated for 5,200 to 6,000 pound axles and has a 6 on 5-1/2 bolt pattern. This is the only regular idler hub we have that takes those bearings and a seal with 2-1/8 inch inner diameter. I have linked a video review of this hub for you.
view full answer... - What Trailer Hub Fits Outer Bearing # 14125AThe bearing number you referenced, # 14125A, is an outer bearing that will fit a number of different hub assemblies. Those compatible hub part numbers are # 42866UC3, # 8-219-4UC3 and # 8-231-9UC1-EZ. We also offer the matching race for this bearing, which is part # 14276. The inner diameter of this bearing is 1.250 inches. I have linked an article and several videos on hubs and bearings that may be helpful to you.
view full answer... - Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings The Dexter 8-222 model hubs currently on your trailer are designed primarily for mobile home use, and these types of hubs typically use unique bearing combinations that make it really difficult to find full replacement assemblies. Mobile home parts like these are really only manufactured for one time use so replacements aren't usually available. The only replacement parts I can offer for your existing setup are the bearings and seal, which can be found with part # L68149 for the inner...
view full answer... - Replacement Hubs, Brake Assemblies, and Tire/Wheel Combination for Old Trailer With Dexter AxlesI have replacement hub, brake, and tire/wheel options to replace what you have on your Dexter axle. They will fit the spindle measurements that you sent me of: A is 3" B is 2.125" C is 1.75" D is 1.25" E is 1" The replacement hub and drum assembly that fits that spindle is the Dexter Trailer Hub and Drum Assembly # 42866UC3. With this assembly you will need to purchase the grease seal # GS-2125DL which has the smaller I.D. of 2.125 inches. If you have E-Z Lube spindles on your trailer...
view full answer...
- How to Pick Out Replacement Hubs for 28 Continental Cargo TrailerIn order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub...
view full answer...
- What is Hub Bore of Dexter Trailer Hub with 8 on 6-1/2 inch Bolt PatternThe pilot hole for your wheel will need to be 4-3/4" or more to be used with Dexter Trailer Hub and Drum Assembly # 42866UC3. Since your wheel has a center bore of 4.9 inches it would easily fit on this hub.
view full answer... - 12 x 2 Self-Adjusting Electric Brakes For 6,000 lb or 7,000 lb Dexter AxleFor a 12" x 2" hub and drum, there are a couple of options for self-adjusting electric brakes, depending on if your Dexter axle is rated for 6,000 lbs or 7,000 lbs: - 6,000 lbs: Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 - 7,000 lbs: Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 For the installation you will also need the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12. As for the hub and drum (just the drum, alone, is not sold separately),...
view full answer... - Recommended Hub and Drum Assembly for 5,200 and 7,000 Pound Timbren Axle-Less Trailer SuspensionLike any trailer suspension, you would be overloading it if you had all the weight on a single tire. Not just the suspension but other components as well. We do not have an option that includes the hub, bearings, and brakes for the 5,200 lb and 7,000 lb Timbren but I would be happy to recommend parts for a complete setup. The # TASR5200S05 and # TASR7KS01 use the same bearing combination so the same parts will work for both. For a hub and drum assembly with the bearings, races, and seal...
view full answer... - Hub and Drum Assembly Needed for a 1979 Featherlite Horse Trailer with 6000lb AxlesIt sounds as if you will need the trailer hub and drum assembly # 42866UC3, which has an 8 on 6-1/2 bolt pattern and uses the # 25580 inner bearing (1.75 inch inner diameter) and # 14125A outer bearing (1.25 inch inner diameter). This assembly works with a 12 x 2 inch brake assembly like left hand electric brake assembly # 23-105, and with wheels that use 1/2 inch studs. There are numerous other possibilities, like 12 x 2-1/4 inch brake assemblies, different bearing part numbers, and...
view full answer... - How to Identify Dexter Axle on 2003 Roadmaster RMU712Hi David; normally I would be able to tell you with that axle tag but Dexter was unable to identify it using the serial number. The old metal tags usually take a little longer since they have to contact the specific plant they came from. Plant 12 didn't find anything when they checked. What you will need to do is remove the hubs and check your bearings. The bearing combination will give you a good idea on the capacity. You can look for the bearing number stamped into the sides of the...
view full answer... - How to Pick Out Brakes for 3,500 lb Boat Trailer with Tandem AxlesInstalling brakes on a trailer really isn't too bad. The install is pretty basic and a DIYer like yourself wouldn't have a problem at all. To determine the parts you need though we need to for sure know what axles/spindles you have so that we pick out the right parts. I attached a couple guides for that down below for you to check out. There are a lot of boat trailers that have great results with electric drum brakes so if that's a route you are interested in that's what I would recommend...
view full answer...
- Is There a Replacement Hub for My Mobile Home AxleIn order to determine which hub will fit the spindle, you will either need the bearing numbers from the bearings from that spindle, or you can take some precise measurements on the different steps on the spindle using a dial caliper to get precise measurements. Often times it is not possible to find replacement parts for mobile home axles as they are designed for one time use. In most cases replacement parts are simply not available. However, if you can find the bearing numbers or collect...
view full answer...
- Why is Axle with Same Diameter as 3500lb Axle Rated at 2990lbFor your 2990 lb rated axle with the same 2-3/8 inch diameter as 3500 lb axles, there may be other factors such as the outer wall or bearing sizes that ultimately reduce the rating of your particular axle below 3500 lbs. If you are looking for replacement hub and drum assembly parts, I can try tell help you find them if you know the bearing numbers or spindle measurements on your trailer, but unfortunately I cannot guarantee that your axle has the same wall thickness as a standard 3,500...
view full answer... - Replacement Hub Assembly for Axle with 1-1/4 Inch Diameter Outer and 1-3/4 Inch Inner BearingIf you do not need electric brakes on your axle, I recommend the Dexter Trailer Hub Assembly # 42865-KIT. This assembly includes the # 25580 inner bearing, the # 14125A outer bearing, and a grease seal with a 2-1/4 inch inner diameter needed for the spindle on your existing axle. Also included with the assembly are the races, grease cap, wheel bolts, and lug nuts. The hub has a 8 on 6-1/2 wheel bolt pattern. One hub assembly is included for the part number. You would want 2 of the # 42865-KIT...
view full answer... - Would Trailer Hub # 42865-KIT and Hub & Drum Assembly # 42866UC3 Work Well TogetherYes, the Trailer Hub Assembly # 42865-KIT and the Trailer Hub & Drum Assembly # 42866UC3 would work well together for having a brake axle and an idler axle. The both have the same bolt patterns, weight capacities, and use the same bearings so they would work very well together. I would recommend you install the brake axle on the axle closest to your tow vehicle. I attached a video of how to remove and re-install hubs from a spindle.
view full answer... - How to Pick Out a Replacement Hub for a 8-133 HubMy understanding is that the 8-133 hub is a mobile home axle hub. Typically these hubs are very hard to find replacement parts for since they are designed for one time use. However, there is still a chance we can find you a replacement hub. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels....
view full answer...
- Recommended Hub And Drum And Brakes For Tri-Axle Gooseneck Trailer With 7,000 AxlesThe hub and drums we offer for a 7,000 lb axle we offer all use 12 x 2 inch brakes. They also have an 8 on 6-1/2 inch wheel bolt pattern. I have attached a link to the hub and drums we have that are designed for a 7,000 lb axle you can check out. If you do not have EZ-Lube axles I recommend part # 42866UC3. These come with the bearings, races, seal, grease cap, wheel bolts and lug nuts. If you do have EZ-Lube axles I recommend part # 42866UC3-EZ. These are the same hub and drum but have...
view full answer...
- What Information is Needed to Pick Out the Correct Replacement Hub and DrumIn order to determine which replacement hub and drum you would need to replace your current parts, you will need to either get the numbers that are stamped on your bearings, or you will need to get some precise measurements from your spindle. The measurements you need will be where the seal and bearings ride. Check out the picture I attached to see which measurements are needed. I attached a video on removing and reinstalling trailer hubs for you to check out also.
view full answer...
- Trailer Wheel Pilot Hole Diameter is Too Small for New Hub and Drum AssembliesIf the pilot hole on the wheel was larger than 4-3/4 inches, and the wheel is center on the hub using the lug nut rather than wheel bolts, it would not matter. But since the wheel pilot hole is smaller, you will not be able to use the hubs you purchased without also replacing the wheels. I went out to the warehouse and measured a Trailer Hub and Drum Assembly, # 42866UC3, to determine the diameter of the center portion that goes through the pilot hole of the wheel. Using some digital dial...
view full answer... - Replacement Hub/Drums and Brake Assemblies for 2018 Jayco Eagle 336FBOKSince your 2018 Jayco Eagle 336FBOK has a 6k axle the correct drum brake assemblies would be the part # 23-458-459. It sounds like you are also looking for replacement hub/drums as well. For that the correct part number is # 42866UC3. You should note that the brake assemblies are sold as a pair, one for each side of the axle, and the hubs are sold individually.
view full answer... - Replacement Trailer Hub for TDE 46248Hub and drum assembly # 42866UC3 will work as a replacement hub for what you have based on the inner dimensions of the bearings you mentioned.
view full answer... - Correct Braking Assemblies and Hubs/Drums for 1999 Pace American Cargo TrailerThe correct braking assemblies and hubs/drums for a 1999 Pace American Cargo Trailer are as follows: Dexter Electric Trailer Brake Kit part # 23-180-181 Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3 (2.125") or part # 42866UC3 (2.250") If you don't know what grease seal you need (requires measuring) as it could be either 2.125" or 2.250", you can simply purchase either hub/drum and the extra seal, part # GS-2250DL or part # GS-2125DL so you're covered either way.
view full answer... - Lug Nuts for Wheel on 2013 Heartland Big Country 3691SKAccording to my research your 2013 Heartland Big Country 3691SK uses 235/80-16 tires with a 16 inch wheel like the Castle Rock ST235/80R16 Radial Trailer Tire with 16" Silver Mod Wheel # LHACK133 with a hub that has either 1/2 inch studs like # 42866UC3 or 9/16" studs like # 8-219-13UC3. We don't have any way of knowing which is on your specific trailer so the only way to know is to measure with a digital caliper like # PTW80157. Once you do know you will need either: - 1/2"-20 Trailer...
view full answer... - Trailer Hub Recommendation for a Number 42 SpindleBased on the dimensions you listed it sounds like you have a number 42 spindle. All you need to do now is verify that the surface of the spindle where the seal rides is 2.24 inches. If so then the trailer hub like the part # 42866UC3 would fit and work well. It will require a trailer rim with an 8 6-1/2 inch bolt pattern though like part # TA26FR.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Kevin C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
6/14/2023
Oh, no! I will have our customer service team reach out to you as quick as we can.