What is Hub Bore of Dexter Trailer Hub with 8 on 6-1/2 inch Bolt Pattern
Published 01/14/2022
Question:
Hi, what is the bore size of the wheel required to fit? My wheel is 8x6.5 with bore 125.2mm. Will that fit this hub?
asked by: Travis K
0
Expert Reply:
The pilot hole for your wheel will need to be 4-3/4" or more to be used with Dexter Trailer Hub and Drum Assembly # 42866UC3. Since your wheel has a center bore of 4.9 inches it would easily fit on this hub.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Add Timbren Axleless Suspenion to a Trailer and Use 5 x 5 Lug Jeep Wheels
- Q&A: Replacement RV Stereo for Magna Dyne M4-LCD
- Q&A: What Is The Difference Between 7K Hub/Drums From etrailer And Dexter?
- Q&A: Parts Needed To Convert M1101 Military Trailer To Electric Drum Brakes
- Q&A: Self Adjusting 12" Brakes for a 5,200 to 7,000 Pound Axle
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Q&A: Correct Replacement for Dexter Trailer Brake Assemblies 023-464-00
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box