1. Trailer Hubs and Drums
  2. etrailer
  3. 8 on 6-1/2 Inch
  4. For 7000 lbs Axles
  5. Hub with Integrated Drum
  6. Easy Grease
  7. EZ Lube
Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased

Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased

Item # AKHD-865-7-1-EZ-K
lowest price pledge
Our Price: $203.84
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 35 lbs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included. Lowest Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased part number AKHD-865-7-1-EZ-K can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (13)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKHD-865-7-1-EZ-K

  • 8 on 6-1/2 Inch
  • For 7000 lbs Axles
  • Hub with Integrated Drum
  • Easy Grease
  • EZ Lube
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • 14125A
  • 9/16 Inch Stud
  • 25580
  • etrailer

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.


  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Zinc-enriched paint on drum adds durability
  • Zinc-finished bolts resist corrosion
  • Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • Bearings, races, grease seal, grease cap, and lug nuts are included
  • QAI and CSA certified


  • Application: 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Actual drum dimensions: 12" diameter x 2-3/8" long
    • Works with 12" brake assembly
  • Bolt pattern: 8 on 6-1/2
  • Wheel studs: 9/16" diameter x 1-5/8 long
  • Grease cap flange diameter: 2.72"
  • Weight capacity: 3,500 lbs
  • Limited 1-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.

E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

KBD2-865-39 AxleTek 12" Hub and Drum Assembly for 7,000-lb Axle with Hardware - 8 on 6-1/2 - EZ Lube - Pre Greased

Customer Reviews

Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased - AKHD-865-7-1-EZ-K

Average Customer Rating:  4.7 out of 5 stars   (6 Customer Reviews)

Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.

- AKHD-865-7-1-EZ-K

The hub assembly was an EXACT replacement for the OEM hub on my 5th wheel trailer. It was easily installed to replace the hub that failed. I was surprised at how quickly etrailer shipped the part and how fast it arrived at my home.

Never had a problem with the replacement hub assembly. I worked perfectly up until we traded for a new 5th wheel in Sept. 2018.
Lee - 03/26/2019

- AKHD-865-7-1-EZ-K

Great except that you sent me lug nuts that are too small for the studs.

- AKHD-865-7-1-EZ-K

I needed new hub and wheel parts for a 7k lb axle on a large triaxle toyhauler. Michael H was very helpful answering questions and George J had the right parts to me quickly and efficiently. etrailer.com and their staff are excellent to work with.

- AKHD-865-7-1-EZ-K

Fast friendly service and the products are great. Thanks

- AKHD-865-7-1-EZ-K

Great prices on quality products.

- AKHD-865-7-1-EZ-K


Ask the Experts about this etrailer Trailer Hubs and Drums

  • Best Way to Grease Trailer Hub that Has EZ Lube Spindles
    Here's the process on pumping grease into a hub that has EZ lube spindles. But please be careful not to overfill the hub as it's easy to do and will blow out the grease seal. First, grease your bearings and spindle by hand or with a bearing packer like part # L70025. If you are going to do it by hand, start with a gob of grease in your palm and then press the bearing into the grease with some force. Next, insert your bearings and grease seal in the hub and mount your hub on your...
    view full answer...
  • How to Determine if a 7K Dexter Trailer Axle Hub has 1/2 Inch or 9/16 Inch Studs
    The only difference between the Dexter 7K hubs and hub and drum assemblies that have either 1/2 inch studs or 9/16 inch studs are the studs themselves. Otherwise they are exactly the same. You can use calipers such as # PTW80157 to measure the diameter of the studs you have. Or you can check the hubs you have for any numbers stamped into them. If you see a 219-04 or 219-09 then it has 1/2 inch studs. If you see a 219-13 or 219-18 they are 1/2 inch. It is also possible that this information...
    view full answer...
  • Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Inch Studs for 7,000 Pound EZ Lube Axles
    Trailer Hub and Drum Assembly with a 12 inch diameter with 8 on 6-1/2 bolt pattern, 9/16 inch studs, for EZ lube axles is part # AKHD-865-7-1-EZ-K. This hub and drum assembly fits 7,000 pound axles and using inner bearing 25580 and outer bearing 14125A. I have linked a video review for your you.
    view full answer...
  • Replacement EZ-Lube Grease Cap and Rubber Plug
    It sounds like you need an EZ-Lube type grease cap and rubber plug for your trailer hub. We have these EZ-Lube grease caps in several sizes to fit a range of hubs. All are shown on the linked page. All you need to do is measure your hub's inside bore diameter to choose the correct matching grease cap. Part # RG04-040 fits a hub bore of 1.99-inches. Part # RG04-080 fits a hub bore of 2.44-inches. Part # RG04-120 fits a hub bore of 2.72-inches. This is the size that fits the...
    view full answer...
  • Correct Replacement for AL-KO 568182 or Hayes 09089324
    The correct replacement we offer for an AL-KO 568182 or Hayes 09089324 is the Trailer Hub and Drum Assembly part # AKHD-865-7-1-EZ-K which will work with the EZ-Lube Spindles (Dexter) and UltraLube (AL-KO). I can confirm the above will fit an AL-KO H60 Axle. I unfortunately don't have any reference to the Titan part number you listed.
    view full answer...
  • How To Upgrade from 6-Lug to 8-Lug Hubs On a 7K Axle
    In order to swap from 6-lug hubs to 8-lug hubs on a 7K axle you simply need new hubs, the Trailer Hub and Drum Assembly part # AKHD-865-7-1-EZ-K. The Electric Trailer Brake Kit part # AKEBRK-6 can then be used to add brakes to the un-braked axle. It is not very common to have 6-lug hubs on a 7K axle so this will be a great option for better parts compatibility.
    view full answer...
  • How To Find Correct Replacement Hub/Drum for Jayco Eagle
    In order to find the correct replacement hub/drum assembly for a trailer you'll need to know the axle capacity which can be found on the axle tag in the center of the axle. The two most common are 3,500 lb and 5,200 lb. The correct replacement for a 3,500 lb is the Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K and the correct replacement for a 5,200 lb - 6,000 lb is the Trailer Hub and Drum Assembly part # AKHD-655-6-EZ-K. We also offer the Trailer Hub and Drum Assembly part # AKHD-865-7-1-EZ-K...
    view full answer...
  • Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Studs for 7,000 Pound Axles
    The size socket used isn't necessarily going to be the same as the nut or stud thread size. It is usually larger since the outer width of a hex head is larger than the threaded diameter. Hub and drum assembly # 8-219-13UC3 for 5,200 to 7,000 pound axles does indeed have a stud diameter of 9/16 and would take 9/16 inch lug nuts. We also have the similar etrailer model, # AKHD-865-7-1-EZ-K, that also has 9/16 inch studs. Both it and the above assembly are for EZ Lube axles. If your axles...
    view full answer...
  • How To Use 17.5" Wheels On a 7,000 Lb Trailer Axle
    In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll need the Trailer Hub and Drum Assembly part # AKHD-865-7-1-K for standard or part # AKHD-865-7-1-EZ-K for EZ-Lube. Then, you can use a 17.5" diameter trailer wheel like the Aluminum Lynx Trailer Wheel part # 274-000006. I have attached a full list of wheel...
    view full answer...
  • Recommended Brake Assemblies And Drum Assemblies For 7,000 lb Dexter Axles
    For your Dexter 7,000 lbs axles, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. These brake assemblies are side specific and are labeled for you. They are self adjusting after the initial adjustment at installation. We don't carry the spindles for your 7,000 lb axles, but we do have the hub and drum assemblies that will fit a traditional style spindle or an E-Z lube spindle with the 9/16 lug bolts. For...
    view full answer...
  • Recommended Hub and Drum Assemblies and Brakes for 7,000 Pound Triple Axle Trailer
    To determine exactly which hubs you need you'll need to find your bearing numbers. Most likely you have # 25580 and # 14125A but verify to be sure. If these are correct you'll next want to find the diameter of your wheel studs and if you have E-Z Lube axles. If the studs are 9/16 inch use # AKHD-865-7-1-EZ-K for E-Z Lube axles and # AKHD-865-7-1-K for standard axles. For 1/2 inch studs instead use # AKHD-865-7-2-EZ-K for E-Z Lube or # AKHD-865-7-2-K for standard axles. Then...
    view full answer...
  • Are Timbren Axle-less Systems Rated per Side or as a Total System
    The weight capacity rating for a Timbren axle-less system is a total for the entire system. They're rated in comparison to standard axles that they replace. So the 3,500 pound system you asked from, part # A35RS545E, is rated for a total of 3,500 pounds and uses the same hubs, bearings, and brakes as a standard 3,500 pound axle. If you're looking for a system rated for 7,000 pounds then you need part # TASR7KS01 instead. It doesn't include hubs or brakes but you can use part # AKHD-865-7-1-EZ-K...
    view full answer...
  • Recommended EZ Lube Hubs For 7000 lb Capacity Axle 8 Bolts With 5/8 Inch Wheel Studs
    For a 5/8 inch stud option without the EZ Lube, I recommend the Dexter Axle Trailer Hub and Drum Assembly - 7,000-lb Axles - 8 on 6-1/2 # 8-219-18UC3. This will have the grease cap and not the EZ Lube. However, you can add the EZ lube grease caps with plug that will fit, they are # RG04-120. If you want a complete kit, we don't have the 5/8 inch stud size, but for the 1/2 inch stud option, I recommend the Trailer Hub and Drum Assembly - 7,000-lb E-Z Lube Axles - 12" Diameter - 8 on...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.