bing tracking image
  1. Trailer Brakes
  2. Dexter
  3. 4400 lbs Axle
  4. Electric Drum Brakes
  5. 10 x 2-1/4 Inch Drum
  6. Standard Grade
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K

Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K

Item # K23-478-479
Our Price: $452.47
Trailer Brakes
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Dexter trailer brakes for your 2013 Starcraft Autumn Ridge Travel Trailer are available from etrailer.com. Installation instructions and reviews for your Starcraft trailer brakes. Expert service, and great trailer brakes prices. etrailer.com carries a complete line of Dexter products. Order your Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K part number K23-478-479 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2441)
  • Q & A (0)
  • Photos

Dexter Trailer Brakes - K23-478-479

  • 4400 lbs Axle
  • Electric Drum Brakes
  • 10 x 2-1/4 Inch Drum
  • Standard Grade
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Dexter

Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.


Features:

  • Self-adjusting brakes let you maintain optimal braking power at all times
    • Ensures reliable contact between the brake shoes and drums
    • Prevents uneven wear on brake shoes
  • Easier to install and gives you more control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed
  • Long-lasting brake pads offer excellent braking torque
    • Fully bonded to shoes for more consistent braking compared to riveted pads
  • Durable magnets ensure consistent braking power
    • Encased in a stamped steel housing
  • Adjuster plugs (included) protect internal components from dirt, grime, and road debris
  • Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included
    • Includes mounting bolts and nuts
  • CSA certification ensures quality
  • Made in the USA


Specs:

  • Application: most standard Dexter hub-and-drum assemblies
    • Does not work with Lippert 4,400-lb axles due to clearance issues with the brake mounting flange
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange: 4 bolt
    • Measurement from center of top mounting stud to center of top mounting stud: 2-7/8"
    • Measurement from center of bottom mounting stud to center of bottom mounting stud: 3-1/4"
    • Measurement from center of top mounting studs to center of bottom mounting studs: 3"
  • Wheel size: 14", 14-1/2", and 15"
  • Axle rating: 4,400 lbs
  • Limited 5-year warranty


Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.


Self-Adjusting Brakes Don't Require Routine Maintenance

With standard electric brake assemblies, you need to manually adjust them every now and then to make sure you're getting the shortest stopping distance every time you tow.


A trailer drum brake with a red callout shows the location of a tension cable and pulley on a self-adjusting trailer brake.

With self-adjusting brakes, though, you'll always have peak stopping power - simple as that! As the brake pads wear over time, a tensioning cable will automatically keep the pads in alignment so they'll consistently make contact with your drum when you brake. You won't have to do tedious manual adjustments anymore.


Thoroughly Tested for Safety

Dexter invests a lot of resources to ensure that these brakes meet the requirements for certification set by the Canadian Standards Association (CSA). Basically, a CSA certification tells you that these trailer brakes are well built and safe for use on the road.


How to Break In New Brakes

Once you get these brakes installed, you'll need to break them in. First, find a long stretch of road or a big, empty parking lot. Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.


Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.



K23-478-00 Dexter Electric Brake Assembly - LH - Driver Side - 10" x 2-1/4" - Self-Adjusting - 4,400 lbs

K23-479-00 Dexter Electric Brake Assembly - RH - Passenger Side - 10" x 2-1/4" - Self-Adjusting - 4,400 lbs



Customer Satisfaction Score:


Customer Reviews

Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K - K23-478-479

Average Customer Rating:  4.8 out of 5 stars   (2441 Customer Reviews)

Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.

by:

After doing my homework on what I needed for my Grand Design 230 RL finding the original equiptment replacement parts was essential. After much time on the internet E Trailer had what I needed. I was taken back by the pricing after my search showed some less expensive replacements of the not OE quality. Upon receipt of my purchase I see why the price. Very high quality. Happy me.



by:

Easy to install and have been good reliable brakes for several trips so far. Although, extremely expensive. At over 3 times the cost of the next size down, seemed excessive, but if that’s the size you need you have no choice.



by:

Great service. Got everything fast and complete. Great product and service.



by:

It took awhile to get the correct part numbers, but when done, the product installed nicely! Highly recommended.

Jon

8/3/2023

Excellent. Once we figured out what part numbers I needed, the delivery was quick and the parts fit perfectly.



by:

Exactly what I wanted



by:

Delivered swiftly! 2 days. Perfect fit for 2022 Adrenaline 21LT. Hard part to find anywhere in stock. Thank you!



by:

Ordering was quick and easy



by:

had to return the first set as they did not fit, the second set were the correct set. Installed



by:

My order was taken courtesly, delivered on time and received as ordered! The Dexter brake assembly was the correct match and installed with minimal effort. I haven't pulled the 5th wheel yet so can't comment on practical use but dealing with etrailer has been seamless. Thanks.

Paul G.

6/5/2018

Thanks for asking. The brakes are performing well and were a good purchase thru etrailer.com. Your reputation for quality continues to grow.



by:

A bit expensive but it is exactly what we need. Received in 3 days!



by:

The parts received were the correct ones. After trying to find them locally and being sold the incorrect parts and then after several days being told they were unavailable, it was a relief to easily find, order and receive the corect parts. Thank you etrailer!



by:

I ordered 2 sets of 10" 2 1/4 electric shoes / self adjusting for my Jayco eagle. Received them about 5 days after i ordered them. have installed all but 1 on rear axle. They were very easy to install and wire. tested them today while burnishing them going to another park so far they work well. hope to finish the last on soon. I did replace all bearings and seals on each wheel as i was changing them out.



by:

The breaks were is to replace. I was able to do it by myself. I have not done a road test yet. Thanks for the fast shipping.



by:

Haven’t installed yet,



by:

Awesome product, great customer service.



by:

Very nice quality and easy to use. Highly recommend etrailer products.



by:

Excellent service and parts



by:

I was in trouble time wise to get my trail brakes fixed. I called Montrell at etrailer...He was extremely helpful to quickly process my order. The brakes came before the time quoted, and they were put on and done quickly. I will always start with etrailer when I need products that you have. Thanks to your company and Montrell.



by:

The package containing brake assemblies for two axels was delivered on time and in good shape. The assemblies were exactly what I ordered and fit perfectly. Thank you for efficient and friendly experience!!



by:

Straightforward to install. Still working a year later.



by:

Direct replacement. Working as expecte d.



by:

Easy to install. Exactly what I needed for my camper. I called a local camper dealer to inquire about buying them and was told “we do not do brakes”!
So I called you and you fixed me up immediately....Thank you!



by:

Good service, good product!

Joe W.

7/24/2020

Its doing just fine. I have no complaints.

Joe W.

7/24/2020

Its doing just fine. I have no complaints.



by:

Good product. Was delivered on time



by:

Delivery was lightning fast.


25
2284
Show More Reviews

See what our Experts say about this Dexter Trailer Brakes

  • Ford Integrated Trailer Brake Controller Compatibility with Dexter Nev-R-Adjust Brake Assemblies
    The Ford TBC will work just fine with the Dexter Nev-R-Adjust brake assemblies. The Ford TBC really only has issues with Electric Over Hydraulic brake actuators, so we do recommend an aftermarket controller in those instances and an aftermarket controller would then require the TBC to be disconnected. I've attached an article to assist. For electric brakes, the self-adjusting assemblies have absolutely no bearing on the factory Ford systems. If your trailer has 10 inch brakes, then...
    view full answer...
  • Correct Self-Adjust Braking Assemblies for 2021 Grand Design Imagine 3250BH
    The 2021 Grand Design Imagine 3250BH can come from the factory with either 3,500 lb, 4,400 lb, or 5,200 lb axles. If you have 5 lug hubs then that means you have 3,500 lb axles and need the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469. If you have 6 lug hubs then that means you have either 4,400 lb or 5,200 lb axles. If you have 4,400 lb axles then you need the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # K23-478-479 of if you have 5,200 lb axles then you need...
    view full answer...
  • Correct Replacement Braking Assemblies for Airstream International Signature 30
    It's likely you have a 4,400 lb axle which you can confirm by reading the sticker on the axle tag in the center of the beam. If that's the case then you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # K23-478-479. These are bolt-on assemblies which feature a simple four bolt pattern with two wire installation. They are standard 10" brakes.
    view full answer...
  • Replacement Bearings, Races, Seals, Brake Drums and Brake Assemblies for 4400 lb Axle
    The spindles used on the 4400 axle are compatible with the # L67048 Inner bearing and # LM67010 race and the # L44649 Outer bearing and # L44610 race, along with the 10-19 grease seal, part # RG06-050. You'll want to confirm this by pulling one of the hubs to check the reference numbers off of your current bearings. For brakes, you'd need a 10 x 2-1/4 inch brake assembly. I'd recommend a Nev-r-adjust assembly, part # K23-478-479 for the right and left sides. Typically, it's recommended...
    view full answer...
  • Electric Trailer Brakes for 2013 Keystone Cougar 32RBK
    Though we do not have any types of parts list for trailers, I did take a look at the specs for your 2013 Keystone Cougar 32RBK travel trailer and it looks like the GVWR of the rig is 9,000 lbs. Electric brakes that may be a fit for you are the Electric Trailer Brake Kit # AKEBRK-7-SA, which are 12" and rated for axles with a capacity between 5,200 lbs and 7,000 lbs. They have a 5-bolt mounting flange and fit 14.5" to 16.5" wheels. These self-adjusting brakes need mounting hardware # BRKH12...
    view full answer...
  • Replacement Brake Assembly and Hubs for Keystone 2016 Cougar Xlite 31SQB
    Thank you for the part number info on the hubs of your 2016 Keystone Cougar Xlite based that we can tell you have a 4,400 lb trailer axle so for a replacement hub you'd want the part # 8-407-5UC3-EZ. Then for brake assemblies you'd want the part # K23-478-479 and you'd be set.
    view full answer...
  • How to Pick Out Brakes for 3,500 lb Boat Trailer with Tandem Axles
    Installing brakes on a trailer really isn't too bad. The install is pretty basic and a DIYer like yourself wouldn't have a problem at all. To determine the parts you need though we need to for sure know what axles/spindles you have so that we pick out the right parts. I attached a couple guides for that down below for you to check out. There are a lot of boat trailers that have great results with electric drum brakes so if that's a route you are interested in that's what I would recommend...
    view full answer...
    Image 1 for
  • Comparing the eTrailer and Dexter Electric Trailer Brake Kits
    I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part # AKEBRK-35-SA (3,500 Axles) Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 (3,500 Axles) Dexter Nev-R-Adjust Electric Trailer Brake Kit part # K23-478-479 (4,400 Axles) The eTrailer brand is going to be the economy line and the Dexter brand is going to be the premium line. The...
    view full answer...
  • Replacement Brake Assemblies for AL KO 4,400 lb Axle
    Hey Ray, for 4,400 AL KO trailer axles the correct replacement brake assemblies are part # K23-478-479 that you referenced. We've confirmed these fit the AL KO axles several times over the years.
    view full answer...
  • Can 4,400 lb Trailer Axle Brake Assemblies Fit 3,500 lb Axle Hub/Drums
    The bolt pattern of the 4,400 lb brake assemblies like the # K23-478-479 is different from the 3,500 lb axle brake assemblies like the # 23-468-469 that would fit so that's what you'd want to go with. I know it sounds tempting to put higher rated brake assemblies on the axle to help improve braking power but it actually doesn't work like that. The difference is higher rated assemblies have a more sensitive brake magnet which only means that dialing in the correct braking power on a lighter...
    view full answer...
  • Self Adjusting Brake Assembly Recommendations for 2010 Keystone Cougar 276RLS
    The part # K23-478-479 is exactly what you are looking for. It is the left and right self adjusting brake assemblies that are the correct fit for the Dexter D44 4,400 lb axles you have on your 2010 Keystone Cougar 276RLS.
    view full answer...
  • Replacement Hubs and Brake Assemblies for Lippert 4,400 lb Axle
    Hey Mario, the correct brake assembly set you need for the 4,400 lb axles on your trailer is the part # LC46WD and # LC96WD. Then for a hub/drum you'd want the part # 8-407-5UC3-EZ and you'd be set. The hub includes all the needed bearings and seals
    view full answer...
  • Replacement Electric Brakes on 4000lb Axle
    With you having 4,000 pound torsion axles, you will need to double check something before moving forward. Though both of these options will measure 10 x 2 1/4 inches, there is a big difference between them. The etrailer.com Self-Adjusting # AKEBRK-35-SA will have a bolt pattern of 2 7/8 inches from center to center of all 4 bolt when moving around them in a clockwise manner. You can also go center to center of 2 bolts diagonally to get 4 inches. These are rated to 3,500 pounds per axle...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Brakes for Dexter 4,400 Lb Axle with 023-478-00
    If you have a 023-478-00 braking assembly on the left side of your trailer then that means the correct Dexter Nev-R-Adjust Electric Trailer Brake Kit for you is part # K23-478-479 which comes with both the left and right side.
    view full answer...
  • Replacement Magnets for 10 x 2-1/4" Brakes for 4,400 Pound Axle
    The magnets on the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4,400 lbs # K23-462-463-00 will be rated for 4,400 lbs. The magnets will have the same rating as the brake assembly. I am assuming you need magnets for 10 x 2-1/4" brakes. According to Dexter, the replacement magnet for the # K23-462-463-00 is the # BP01-225 Trailer Brake Magnet for 12" Dexter, 7K. These are the official replacement part for this brake assembly. I have attached a review of the...
    view full answer...
  • Recommendation to Replace Electric Brakes on Keystone Cougar Trailer with 4,400 Pound Axles
    For your Keystone Cougar Trailer equipped with 4,400 pound axles the Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 should work perfectly. These are designed for 4,400 pound axles but you will just want to make sure your existing mounting flanges feature the same 4 bolt pattern (see attached image) and your hub drums measure 10 inches x 2-1/4 inches. These particular brakes also have the Nev-R-Adjust feature which means you won't have to perform periodic manual adjustments...
    view full answer...
    Image 1 for
  • Can the Dexter 4.4K Nev-R-Adjust Electric Trailer Brakes Be Purchased Individually
    Yes, the Dexter 4.4K Nev-R-Adjust Electric Trailer Brake Kit part # K23-478-479 can be broken down into the right side part # K23-479-00 and left side part # K23-478-00.
    view full answer...
  • How to Determine if Dexter Brake Assembly is Manual or Self-Adjusting
    If you have a self-adjusting brake assembly, you'll be able to see the adjuster cable extending across the brake assembly once you remove the hub/drum. However, we sell the Dexter brake kit # K23-463-00, so we can confirm the brakes are not self-adjusting. If you would like to install self-adjusting brakes, you'll have to adjust them once during the initial install, but after that, they will self-adjust. I've included a video demonstrating how to install and adjust a brake assembly (adjustment...
    view full answer...
    Image 1 for
  • Choosing the Correct 10 x 2-1/4 Inch Electric Brakes
    The brakes need to fit the axle. Or more specifically the hubs and the brake mounting flanges on the axle. One thing that may be confusing you is that brake assemblies for 4,400 pound axles and those for 3,500 pound axles are both 10 x 2-1/4 inches. The difference will be the brake mounting flange bolt hole pattern. If your axle is a indeed a 3,500 pound axle # AKEBRK-35-SA will work for you. The mounting bolts are included but you need part # BRKH10B for the nuts and lock washers. If...
    view full answer...
  • Recommended Self Adjusting Brakes for 2014 Keystone Laredo 5W Travel Trailer
    Based on your Dexter brake assembly information, it looks like you've got the Dexter brake kit # K23-463-00 currently on your trailer. To replace your existing brakes with self adjusting brakes I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K, Item # K23-478-479. This kit fits 13-inch to 15-inch wheels and includes both the driver's-side and passenger's-side brake assemblies, adjuster plugs, mounting bolts, and nuts. The lockwashers...
    view full answer...
    Image 1 for
  • What Brake Assemblies for 4400 Lb Axles
    A 12 inch 5200 lb rated brake assembly isn't compatible with the 10 inch hub used by a 4400 lb axle, but we do indeed offer 4400 lb brake assemblies, as part # K23-462-463-00 for standard brakes or for self adjusting brakes (which I'd recommend), use part # K23-478-479. Either set of brake assemblies would be compatible with the brake drums used on your 4400 lb axles. Either set of brake assemblies mentioned above include the adjuster hole covers and mounting hardware.
    view full answer...
  • Should 3500lb or 4400lb Braking Assemblies Be Used On 2011 Forest River Rockwood Roo 19 TT?
    It truly comes down to the axle rating on your axles. If your 2011 Forest River Rockwood Roo 19 has tandem 3500lb axles you will have no issues using the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA, but if your trailer has tandem 4400lb axles you will want to stick with the # K23-478-479. While the braking assemblies are the same size at 10" x 2-1/4", the braking force is different and using the lower rated brakes will decrease...
    view full answer...
  • Replacement Brake Pads for 4,400 lb Nev-R-Adjust Dexter Axle Electric Brakes
    To replace just the brake pads that come on the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4,400 lbs # K23-478-479 you need the Replacement 10" x 2-1/4" Kit # K71-698-00 for the left-hand side and Kit # K71-699-00 for the right-hand side. I confirmed this with my contact at Dexter Axle Attached is a review video for you to check out.
    view full answer...
  • Replacement Brake Shoes for 4.4K Dexter Nev-R-Adjust Electric Trailer Brakes
    To replace the brake shoes on your 4.4K Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 you need the following parts: Left Hand Replacement Shoe and Lining - # K71-698-00 Right Hand Replacement Shoe and Lining - # K71-699-00
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Brake?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C
Employee Ryan F
Written by:
Ryan F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.