Replacement Bearings, Races, Seals, Brake Drums and Brake Assemblies for 4400 lb Axle
Published 08/23/2019
Products Featured in This Question
Question:
I have a Cougar X lite 26 sab of the year 2012 with axle of 4400 lbs and I want to change the brakes of the 4 wheels. The distance between the holes is 2.816 2.7 / 8 up, down, right side, and left. It does not matter what I need. I also want to change the inner and outer wheel bearing as well as the seal .Which is the picece no.Thank you
asked by: Fidel
Helpful Expert Reply:
The spindles used on the 4400 axle are compatible with the # L67048 Inner bearing and # LM67010 race and the # L44649 Outer bearing and # L44610 race, along with the 10-19 grease seal, part # RG06-050. You'll want to confirm this by pulling one of the hubs to check the reference numbers off of your current bearings.
For brakes, you'd need a 10 x 2-1/4 inch brake assembly. I'd recommend a Nev-r-adjust assembly, part # K23-478-479 for the right and left sides. Typically, it's recommended to replace the brake drums and assemblies at the same time, so that the brake pads and magnet will have perfectly flat and true surfaces to work against. If you decide to replace the drums as well, the bearings, seals grease caps and lug nuts are included. That part number is # 8-407-5UC3-EZ
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L68149 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.38 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Video: All You Need to Know About the Trailer Hub and Drum Assembly
- Search Results: trailer blocks
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Search Results: goodyear endurance 22575r15
- Shop: Breaker Style Wrench for Blue Ox SwayPro Weight Distribution Systems
- Search Results: trailer wheel cap
- Search Results: l44610
- Search Results: lm67010
- Search Results: d44
- Q&A: Availability of Replacement Dexter Trailer Hub 8-407 for 4,400 lb Trailer Axle
- Q&A: Does Trailer Hub # 8-407-5UC3-EZ Fit Dexter 4,400 lb Axle
- Q&A: Which Race is Correct for Trailer Hub Bearing LM67048
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch - 9" Long - 9 Hole Adjustment
- Q&A: What Is The Tread Size For The # 42 Spindle?
- Shop: Replacement Race LM67010 for Bearing LM67048 - Qty 1
- Shop: 2.44" OD EZ Lube Grease Cap - Drive In - Qty 1
- Shop: Replacement Race L44610 for Bearings L44643 and L44649 - Qty 1
- Shop: Timken LM67010 Replacement Race for Bearings LM67047, LM67048, and LM67049A - Qty 1
- Q&A: Recommended Replacement Hub and Drum Assembly for Lippert 4,400 lb Axles
- Video: Feature Review Replacement Nut Retainer for 6-191 Jam Nut
- Q&A: Looking For A Nut Retainer And Hub Cap For A 8k Trailer Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
on Trailer Bearings Races Seals Caps
