Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This stout brake controller has easy-to-reach button controls up front and a simple slide-lever manual override. The digital display is large and easy to read. And the included harness lets you just plug the controller right into your vehicle.
Features:
Specs:
Power output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to go as high as you can without the trailer brakes locking up. It adjusts on a scale of 0 to 10.
Once you have the power output set, you can fine-tune your braking by adjusting the sync control. This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. If your vehicle takes too long to come to a stop, increase the setting. If it stops too abruptly, decrease the setting. The sync setting is shown as a number followed by the letter "o" to differentiate it from the output reading. The least aggressive sync setting is 0o and the most aggressive is 9o.
The Activator IV displays the power settings as you adjust them. While braking, the unit will display the power output setting. To see or adjust the sync setting, step on your brake pedal and press either the plus or minus button to increase or decrease the setting.
The display will also show trouble codes to alert you to any potential problems, such as short circuits or overloads, or if there is an internal problem with the controller.
Installation
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and manual override. And because the included wiring harness is custom fit for your vehicle, you can just plug the controller in. No cutting or splicing needed!
Note: If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
Time-delayed braking means that when you apply the brakes in your vehicle, the controller activates the trailer brakes at a pre-set intensity and rate. Both the amount of braking power (gain) and rate of application (load) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hola neighbors, it's Brad here at etrailer, and today, we're taking a look at the Tekonsha Trailer Wiring Harness Adapter for your Tekonsha brake controller on a Nissan or Infiniti SUV. So this is gonna work with your Armada and also your Q series SUVs, and it's gonna work pretty easily by simply just plugging into the factory tow package, and this other end is gonna allow you to plug into your Tekonsha or Draw-Tite style brake controller, making this a plug and play installation super easy. Now, if you have a Tekonsha brake controller like we have here, we have a Prodigy P2, they have a very similar connector to a bunch of the different Tekonsha brake controllers as well as the Draw-Tite. And this harness is gonna allow us to simply snap this into place here, and then this portion will plug in directly to our tow package, which is gonna be located under the dash. Now, to find your plug, it's gonna be pretty easy. Now, I have this portion of our panel dropped down, you don't need to do that, I'm just doing this to make it a little bit easier for you to find it.
And what you're gonna be looking for is kind of right at the steering column, you're gonna see that we have just the steering column here, but also, a white plastic box here. And you're gonna reach for a thick wire loom, and taped to it is going to be a white plug, and this white plug is gonna correspond with the other side of our harness here. So pretty simple, we'll just plug this in. And as soon as I plug that in, you can see that we have NC, which is not connected to our trailer, but we have power to our brake controller, so all that's really left to do is get this mounted up underneath our dash and we're ready to go. So this is super easy if you have that factory tow package to get your brake controller working properly.
Now, this is gonna be compatible with time delayed brake controllers, so that's gonna be your Draw-Tite Activators as well as the Tekonsha PowerTrac, and also, proportional brake controllers including the Prodigies as well as the Primus and the Voyager. So if you're looking to get your Tekonsha or Draw-Tite brake controller hooked up then start to tow with those trailer brakes, this is gonna be a super easy quick way to get that ready to go and you'll be towing in no time. So overall, this maybe takes about five minutes to get installed, and it's just, again, a plug and play, easy way to get it hooked up. And that was a look at the Tekonsha Brake Controller Wire Harness Adapter..
Worked great!
worked great!
Plug and play! Easy as it gets.
The right tool for the job
Very easy to install.
Snapped right into my wire in 1 minute.
Makes for a very easy install.
Works great and easy install.
Plugged right in and away I went.
Offers great products and fast shipping service!
It plugged in and worked as advertised,Thank you so much,
Fantastic brake controller. Even better website.
Special Nissan electric pig tail plug right in.
Great controller, we install it on almost every system we do.
Great Product- simple installation- everything as promised!
Good overall product. Meets needs and is inexpensive.
ETrailer always has just what I need and great follow up service for any questions I have had. Thanks to your whole team!
this controller is great. etrailer delivery, packaging, pricing were ALL great...
Love it.... Installed in my 2011 chevy in about 5 min and it works great. Recommend to anyone
I bought this as a package with my brake module. Didn't even remove the tywrap. plugged everything in and it works!
Works great, very easy to use, and very easy to install thanks
The product arrived in a timely manner. The item was as described.
It fit my 06 Nissan Titan like original equipment.
Much, much simpler to have a "plug & Play" than to do the wiring yourself. Excellent product and above excellent staff.
Product is basic... Service from eTrailer is EXCELLENT! Gold medal service from everyone.
Do you have a question about this Trailer Brake Controller?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.