Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.
Features:
Specs:
The Pro Series Pilot comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Pilot. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. The amount of braking power (output) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust the settings until the trailer load changes, you switch trailers, or road conditions change. Use the thumbwheel on the side to change the braking output level. The output setting will appear as a number on the digital display, with a higher number indicating higher braking power.
The Pro Series Pilot keeps the manual override within easy reach on the front of the module, great for stopping sway or controlling your trailer's momentum in emergencies. Push the slide-bar to activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and manual override. The Pilot is especially flexible; its microprocessor allows the controller to even be mounted upside down, and it will still give you a readable display. The Pilot can go wherever you need it. Plus, the included wiring adapter eases installation overall. The custom connector end plugs into the port on your vehicle and the other end plugs into the controller.
You can use etrailer's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Alright today on this 2005 GMC Sierra, we are going to install part number 90885, the Prodigy P2 brake controller and part number 3015-P, the brake controller adapter. First step that we need to do is to remove this cover for access to the port that is behind here. So we will undo this nut and pop the cover off. We will take our cord and just plug it into place. Moving on, we will reinstall the cover and then put the nut back into place. Alright next we will go ahead and install our brake controller bracket and we are going to do that on a sheet metal at the bottom of the dash here.
We will take the bracket. We will wind it up; with the sheet metal we will use a clamp to hold it into place. Alright and we will use some soft tapping screws to attach the bracket to the sheet metal. Let us go ahead and attach our dash according to the brake controller. OK, that is good that we have got power, good. We will attach our brake controller to the bracket.
Alright now well take our cable and well zip tie it out of the way. Alright in a short time our break control is already installed. There you have it for part number 90885, the Prodigy P2 Break Controller.
worked great
Product worked as easy as promised
awsome harness just plug and tow
way to easy ,sure beats running wires
perfect fit, easy install
Great product! Easy to install!
good so far
Great products, fast shipping....
plugged right in to controller easy
great product, great service
Easy to install !!
Great product, installed in 20 minutes.
5 minutes installed, great value.
Hooked right up!
works great and very easy to install
Fits perfect. Installs easily.
Worked perfect. Easy Install, plugged right in.
Easy to install. Worked exactly as explained in the video.
Product was exactly as described and arrived very fast.
Perfect, Easy to installtook 10 min to install, perfect,
Installed in less than five minutes. Great product!
Exactly fit my make/model of vehicle, too easy!! Thanks!!
Just makes life easy!! Plug and play, hide the excess wire and your good to go.
Works great, Plug and play.. Couldn't ask for more!!
Make plugging in my Prodigy brake controller as easy as two connections.
Do you have a question about this Trailer Brake Controller?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.