When it comes to trailer parts, compatibility can often be a headache. Enter the Replacement Trailer Hub Bearing LM67048, an industry-standard bearing that's designed for high-speed use. The precise 1.250-inch inner diameter ensures a seamless fit with your existing equipment. Whether you're replacing an outer bearing for your 8-201-5 or 8-213-5 hubs, or looking for Dexter compatibility, this bearing has you covered.
Ever had your trailer bearings give out mid-journey? With the tapered roller design, this bearing promises high-speed stability. It's crafted to handle stress exceptionally well, providing consistent performance and reduced friction even on long hauls. Say goodbye to unexpected breakdowns and hello to smoother rides.
If you're towing heavy loads, the versatility of this bearing is just what you need. It's engineered to work seamlessly with both 5000 lbs and 6000 lbs axles, offering you peace of mind no matter the size of your load. Whether you're pulling a boat or a cargo trailer, rely on this bearing for robust support and durability.
Maintaining your trailer doesn't have to break the bank. These standard bearings offer long-lasting performance, reducing your overall maintenance costs. Trusted by both DIY enthusiasts and professional trailer service providers, they're designed to withstand the pressures of regular use and keep your trailer running efficiently.
Built to last, the Replacement Trailer Hub Bearing LM67048 is equivalent to the trusted Dexter part 031-032-02. This assurance of quality and reliability means you can install them and keep going with confidence, knowing your trailers wheels are in good hands.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, were going to review part number LM67048. This is the Axle Tek Trailer Wheel Bearing. This is an outer wheel bearing, and most replacement wheel bearings are high-quality, tapered-roller bearings designed for high speed use. All bearings will have an industry standard number stamped on them regardless of the brand. To get the correct bearing for your trailer, if you look on the inner ring, usually right there will be listed the part number In this case, for this one would be LM67048. Now, yours might have a different number depending on the brand you have.
What you need to do is just get the part number, give to us, and well be able to cross reference it to the correct bearing you would need. If you dont have the bearing number, the other thing you would have to do would be to measure the inner diameter. Thats the critical measurement of the bearing that fits on the spindle, and what you need to use would be a digital caliper to get a correct measurement because it is measured in thousands of an inch, so a ruler or a tape measure wouldnt work. In this case, if we measure the inner diameter of this bearing, it would measure 1.250. Now, these bearings will consist of three pieces.
It will basically have the inner ring or the cone which is this part right here, slides onto the spindle. It would be the tapered rollers right here, and then the rollers are held together with the cage or the roller retainer, which is the outer part right here. The lubrication on a wheel bearing is mainly wheel bearing grease, sometimes it would be oil. Now, there is one other piece that is required and that is the bearing race, and that is the part that would be pressed into the trailer hub that the bearing would sit into and rotate on. Now, the bearing race is sold separately.
For this one would be part number LM67010, and the critical measurement on that bearing race would be the outer diameter, which for that one would be 2.328 inches. That should do it for a review on part number LM67048.
what amazing speed of delivery
great quality and price
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.