Replacement Trailer Hub for Flat Bed Trailer with 1.25 Inner and 0.75 Outer Bearings

Updated 07/01/2024 | Published 06/18/2020

Products Featured in This Question

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

(15)

$94.10

Replacement Trailer Wheel Bearing - LM11949 - Qty 1

(2230)

$6.73

Replacement Trailer Wheel Bearing - LM67048 - Qty 1

(2230)

$15.52

Question:

I WAS WONDERING IF YOU HAD A TRAILER HUB FOR A OLD TRIALER I HAVE. THE INNER BEARING IS 1.25 AND THE OUTER BEARING IS .75, I THINK IT MAY BE SIMULAR TO A SHORELANDER SS733 HUB KIT, BUT UNSURE SINCE I HAVE A FLAT BED TRAILER. ANY HELP WOULD BE GREAT. THANKS IN ADVANCE

asked by: Michael C

Expert Reply:

It sounds like your trailer uses agricultural hubs # AH15450ECOMP.

This hub has the same 1.25 and 0.75 inner and outer bearings which are parts # LM67048 and # LM11949.

Make sure your seals have an outer diameter of 2.332 inches and inner diameter of 1.50 inches. If this matches then part # AH15450ECOMP is the hub you need.

expert reply by: Charles S

Lucas M.

5/4/2024

Do you have a hub that is a 5 lug for the same bearing number?

Jon G.

5/21/2024

@LucasM The Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR uses a 5 on 4-1/2" bolt pattern but this is for a standard trailer and not an agricultural application like the one mentioned above.

Jeremy

7/1/2024

@JonG the grease seal on the dx22xr is 1.68id instead of the 1.5 needed on the ah15450icomp i need the ah on a 5 lug or a dx w a 1.5id seal . U got anything that will work

Jon G.

7/1/2024

@Jeremy I looked at the options we have and to get what you're wanting you'll need to get the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR as well as the Grease Seal SL150 # SL150 and then you'll just swap this grease seal out for the one that comes with the kit. Unfortunately, we don't have any hubs that match exactly with what you're looking for.