Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner and outer bearings (LM67048), inner and outer races (LM67010), grease seal (16306A), and a cotter pin.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're going to take a look at the CE Smith Bearing Kit for the 1 1/4 Inch Straight Spindles. Now this bearing kit's gonna include everything I have laid out here on the table. It's gonna include both the inner and outer bearings, the bearing races, the grease seal, and the cotter pin. Now basically this kit's gonna let you replace the bearings, the races in the seal on one trailer hub that has the 1 1/4 inch straight spindles.
We're gonna go through each of these just to show you where the part number is on 'em, but the bearings in this case is gonna be the same inner and outer bearing, and it goes by a part number of LM67048. Has an inner diameter dimension of 1.25 inches. And if you look real closely, they will always be stamped right here with the part number LM67048. Also includes both the inner bearing race and the outer bearing race. And they're a part number LM67010 In the same way, they'll be stamped on here.
And basically the bearing race is what the bearing will sit in and rotate in. The grease seal's included. That goes by a part number of 16306A. Now lots of times the the grease seal might not have the part number on it, but, if you look real closely on the rubber portion, sometimes they do stamp the size on this. It'll stamp the outer diameter, which is this measurement, and that's gonna be 2.32 inches.
The inner diameter measurement's gonna be 1.5 inches. And, as we mentioned, the part number on the seal is 16306A. And then the last part is the cotter pin. The cotter pin is used to lock the spindle nut in place once everything's all installed. But that should do it for a review on the CE Smith Bearing Kit for the 1 1/4 Inch Straight Spindles.
.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.